Zoom out
Zoom in
Previous page
1/294
Next page
1
PRIUS v_Navi_OM47895U_(U)
14.09.24 19:41
1 QUICK GUIDE 11
2 BASIC FUNCTION 31
3 AUDIO/VISUAL SYSTEM 69
4
VOICE COMMAND SYSTEM
133
5 INFORMATION 143
6 PHONE 147
7 NAVIGATION SYSTEM 187
8
Entune App Suite
261
INDEX 277
For more information about the following items, see the “Owner’s Manual”.
Fuel consumption
Energy monitor
Rear view monitor system
Vehicle customization settings
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    1 QUICK GUIDE 11 2 BASIC FUNCTION 31 3 AUDIO/VISUAL SYSTEM 69 4 VOICE COMMAND SYSTEM 133 5 INFORMATION 143 6 PHONE 147 7 NAVIGATION SYSTEM 187 8 Entune App Suite 261 INDEX 277 For more information about the following items, see the “Owner’s Manual”.  Fuel consumption  Energy monitor  Rear view monitor system  Vehicle customization settings 1 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 2

    Introduction NAVIGATION SYSTEM OWNER’S MANUAL This manual explains the operation of this system. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The screen shots in this document and the actual screens of this system differ depending on whether the functions and/or a contract existed and the map data available at the time of producing this document. Please be aware that the content of this manual may be different from this system in some cases, such as when the system’s software is updated. NAVIGATION SYSTEM The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense. Using these signals and other vehicle sensors, the system indicates your present position and assists in locating a desired destination. The navigation system is designed to select efficient rou ...
  • Page 3

    Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle’s position depends on satellite conditions, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to page 255. 3 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 4

    IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention with the following marks. WARNING ● This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others. NOTICE ● This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your vehicle and its equipment. SYMBOLS USED IN ILLUSTRATIONS Safety symbol The symbol of a circle with a slash through it means “Do not”, “Do not do this” or “Do not let this happen”. Arrows indicating operations Indicates the action (pushing, turning, etc.) used to operate switches and other devices. 4 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 5

    HOW TO READ THIS MANUAL No. Name Description Operational Outlines An outline of the operation is explained. Main Operations The steps of an operation are explained. Related Operations A main operation’s supplementary operations are described. Information Useful information for the user is described. 5 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 6

    SAFETY INSTRUCTION To use this system in the safest possible manner, follow all the safety tips shown below. This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving ...
  • Page 7

    While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is safe. However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver’s personal judgement. Use this system only in locations where it is legal to do so. Some states/province ...
  • Page 8

    TABLE OF CONTENTS 1 QUICK GUIDE 1. BASIC FUNCTION........................... 12 2 BASIC FUNCTION OVERVIEW BUTTONS ......................... 12 1. BASIC INFORMATION BEFORE OPERATION.................................. 32 “Apps” SCREEN .................................... 14 INITIAL SCREEN ................................... 32 HOME SCREEN .................................... 16 CAPACITIVE TOUCH SWITCHES ........ 34 2. QUICK REFERENCE....................... 20 TOUCH SCREEN GESTURES.............. 35 “Setup” SCREEN ................................... 20 3. NAVIGATION OPERATION ............ 22 REGISTERING HOME .......................... 22 REGISTERING PRESET DESTINATIONS.................................. 24 OPERATION FLOW: GUIDING THE ROUTE................................................ 26 SETTING HOME AS THE DESTINATION .................................... 27 TOUCH SCREEN OPERATION ............ 36 HOME SCREEN OPERATION .............. ...
  • Page 9

    3 AUDIO/VISUAL SYSTEM 1. BASIC OPERATION........................ 70 4 1 VOICE COMMAND SYSTEM QUICK REFERENCE ............................ 70 1. VOICE COMMAND SYSTEM OPERATION................................ 134 2 SOME BASICS...................................... 71 VOICE COMMAND SYSTEM .............. 134 2. RADIO OPERATION ....................... 78 CASUAL SPEECH RECOGNIZATION............................. 140 AM/FM RADIO....................................... 78 3 COMMAND LIST ................................. 141 XM Satellite Radio ................................. 88 4 INTERNET RADIO ................................ 95 3. MEDIA OPERATION ....................... 96 CD ......................................................... 96 USB MEMORY ...................................... 99 5 INFORMATION 1. USEFUL INFORMATION .............. 144 RECEIVING WEATHER INFORMATION ................................. 144 iPod .......... ...
  • Page 10

    TABLE OF CONTENTS 7 NAVIGATION SYSTEM 1. BASIC OPERATION...................... 190 QUICK REFERENCE .......................... 190 8 Entune App Suite 1. Entune App Suite OVERVIEW.................................. 262 MAP SCREEN OPERATION ............... 193 Entune App Suite SERVICE................. 262 MAP SCREEN INFORMATION ........... 200 2. Entune App Suite OPERATION................................ 267 TRAFFIC INFORMATION.................... 204 2. DESTINATION SEARCH............... 207 Entune App Suite ................................. 267 DESTINATION SEARCH SCREEN..... 207 3. SETUP........................................... 274 SEARCH OPERATION........................ 209 Entune App Suite SETTINGS .............. 274 STARTING ROUTE GUIDANCE ......... 219 3. ROUTE GUIDANCE....................... 223 ROUTE GUIDANCE SCREEN ............ 223 TYPICAL VOICE GUIDANCE PROMPTS......................................... 228 INDEX ...
  • Page 11

    1 1 QUICK GUIDE 2 1 BASIC FUNCTION 3 1. OVERVIEW BUTTONS .................. 12 4 2. “Apps” SCREEN ........................... 14 3. HOME SCREEN ............................. 16 5 STATUS DISPLAY................................. 18 2 6 QUICK REFERENCE 1. “Setup” SCREEN .......................... 20 3 7 NAVIGATION OPERATION 8 1. REGISTERING HOME ................... 22 2. REGISTERING PRESET DESTINATIONS ........................... 24 3. OPERATION FLOW: GUIDING THE ROUTE................. 26 4. SETTING HOME AS THE DESTINATION ............................. 27 4 FUNCTION INDEX 1. FUNCTION INDEX ......................... 28 11 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 12

    1. BASIC FUNCTION 1. OVERVIEW BUTTONS 12 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 13

    1. BASIC FUNCTION No. Page By touching the screen with your finger, you can control the selected functions. 35, 36 Insert a disc into this slot. The CD player turns on immediately. Turn the “TUNE SCROLL” knob to select a radio station or skip to the next or previous track/file. 1 73 78, 88, 96, 99, 103, 108 78, 96, 99, 103, 108, 113 Press to play/pause. Press the “ ” or “ ” button to seek up or down for a radio station or to access a desired track/file. 78, 88, 96, 99, 103, 108 Press to access the Bluetooth® hands-free system. 148 MAP card slot Do not eject the SD card, as doing so may deactivate the navigation system. 259 Press to display the home screen. 16, 37 Press to display the “Apps” screen. 14 Press to access the audio/visual system. The audio/visual system turns on in the last mode used. 70, 71, 72 Press to eject a disc. 73 Press the “PWR VOL” knob to turn the system on and off, and turn it to adj ...
  • Page 14

    1. BASIC FUNCTION 2. “Apps” SCREEN Press the “APPS” button to display the “Apps” screen. 14 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 15

    1. BASIC FUNCTION No. Page Select to display the map screen. 190 Select to display the audio control screen. 70 Select to display the hands-free operation screen. 148 Select to display the “Message Inbox” screen. 163 Select to display weather information. 144 1 QUICK GUIDE * Function Select to reorder the applications. 269  Select the desired application then or to reorder. Select to display traffic information. 204 Select to display the “Setup” screen. 20 Select to update the applications. 268 “Owner’s Manual” Select to display the fuel consumption screen. * Select to display the “Maintenance” screen. 65 Select to display the application screen. 262 *: Only for U.S.A. INFORMATION ● When there are two pages, select or to change the page. 15 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 16

    1. BASIC FUNCTION 3. HOME SCREEN Press the “HOME” button to display the home screen. The home screen can display multiple information screens, such as the audio/visual system screen, hands-free screen and navigation screen, simultaneously. When hands-free mode is selected, it is possible to make a call on the home screen if the desired phone number is registered to one of the 4 displayed buttons. In order to register the contact, select and hold the desired button and register the desired contact by obey displayed messages on the screen. (P.158) When a screen is selected, the selected screen is switched to a full-screen display. The home screen can be set to either a three-way split screen or a two-way split screen. For details about setting the home screen: P.37 Three-way split screen 16 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 17

    1. BASIC FUNCTION Two-way split screen 1 QUICK GUIDE No. Function Page Displays the condition of the Bluetooth® connection 18 Select to display the “Setup” screen. 20 17 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 18

    1. BASIC FUNCTION STATUS DISPLAY The condition of the Bluetooth® connection, as well as the level of reception and the amount of cellular phone battery charge left, are displayed on the status display. 18 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 19

    1. BASIC FUNCTION No. Indicators Conditions The condition of the Bluetooth® connection The level of reception The amount of battery charge left Poor (Blue) Good  An antenna for the Bluetooth® connection is built into the instrument panel. The condition of the Bluetooth® connection may deteriorate and the system may not function when a Bluetooth® phone is used in the following conditions and/or places: The cellular phone is obstructed by certain objects (such as when it is behind the seat or in the glove box or console box). The cellular phone is touching or is covered with metal materials.  Leave the Bluetooth® phone in a place where the condition of the Bluetooth® connection is good. Poor Excellent  The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. When the cellular phone is out of the service area or in a place ...
  • Page 20

    2. QUICK REFERENCE 1. “Setup” SCREEN The items shown on the “Setup” screen can be set. Press the “APPS” button, then select “Setup” to display the “Setup” screen. 20 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 21

    2. QUICK REFERENCE No. Page Select to change the selected language, operation sound, automatic screen change settings, etc. 57 Select to customize the home screen. 37 Select to set the voice settings. 63 Select to adjust the contrast and brightness of the screens. 41 Select to set memory points (home, preset destinations, address book entries, areas to avoid), navigation details or to delete previous destinations. 234, 244 Select to set audio settings. 120 Select to set the phone sound, contacts, message settings, etc. 168 Select to set Bluetooth® phones and Bluetooth® audio devices. 49 Select to turn the screen off.  * Select to set Entune App Suite settings. 274 * Select to set data services settings. 146 Select to link the driver’s cellular phone settings. (audio presets, language, etc.) 64 Select to set vehicle information. * Select to set traffic information. 1 QUICK GUIDE Function ...
  • Page 22

    3. NAVIGATION OPERATION 1. REGISTERING HOME 1 2 3 Press the “APPS” button. 4 Select “Go Home”. 5 Select “Yes”. 6 There are different kinds of methods to search for your home. (P.207) Select “Navigation”. Select “Dest.”. 22 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 23

    3. NAVIGATION OPERATION Select “Enter”. 8 Select “OK”. 1 QUICK GUIDE 7 Registration of home is complete. Registering home in a different way P.235 Editing the name, location, phone number and icon P.235 Setting home as the destination P.210 23 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 24

    3. NAVIGATION OPERATION 2. REGISTERING PRESET DESTINATIONS 1 Press the “APPS” button. 2 Select “Navigation”. 3 4 Select one of the preset destination buttons. 5 Select “Yes”. 6 There are different kinds of methods to search for a destination. (P.207) Select “Dest.”. 24 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 25

    3. NAVIGATION OPERATION Select “Enter”. 8 Select a position for this preset destination. 9 Select “OK”. 1 QUICK GUIDE 7 Registration of preset destinations is complete. Registering preset destinations in a different way P.236 Editing the name, location, phone number and icon P.237 Setting preset destinations as the destination P.210 25 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 26

    3. NAVIGATION OPERATION 3. OPERATION FLOW: GUIDING THE ROUTE 1 2 Press the “APPS” button. Select “Navigation”. 5 Select “Go”. 6 Select “OK”. Selecting routes other than the one recommended. (P.219) Guidance to the destination is displayed on the screen and can be heard via voice guidance. 3 Select “Dest.”. 4 There are different kinds of methods to search for a destination. (P.207) 26 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 27

    3. NAVIGATION OPERATION 4. SETTING HOME AS THE DESTINATION 1 Press the “APPS” button. 5 Guidance to the destination is displayed on the screen and can be heard via voice guidance. 2 Select “Navigation”. 3 Select “Dest.”. 4 Select “Go Home”. 27 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 1 QUICK GUIDE Select “OK”. Selecting routes other than the one recommended. (P.219) ...
  • Page 28

    4. FUNCTION INDEX 1. FUNCTION INDEX Map Displaying maps Page Viewing the map screen 190 Displaying the current position 193 Viewing the current position vicinity map 198 Changing the scale 194 Changing the map orientation 195 Displaying map information 200 Displaying the estimated travel/arrival time to the destination 223 Selecting the map mode 196 Displaying traffic information 204 Searching for destinations Page Searching for the destination 209 Changing the search area 210 Route guidance Before starting or during route guidance Page Starting route guide 219 Editing the route 229 Viewing the entire route map 224 Pausing guidance 222 Adjusting route guidance volume 63 Deleting the destination 230 Address book Page Registering address book entries 238 Marking icons on the map 239 28 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 29

    4. FUNCTION INDEX Useful functions 1 Information QUICK GUIDE Displaying vehicle maintenance Page 65 Hands-free system (for cellular phone) Registering/connecting Bluetooth® phone ® Making a call on a Bluetooth phone ® Receiving a call on the Bluetooth phone Voice command system Operating the system with your voice Page 44 153 159 Page 134 29 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 30

    1 BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN........................... 32 2. CAPACITIVE TOUCH SWITCHES .................................. 34 3. TOUCH SCREEN GESTURES...... 35 4. TOUCH SCREEN OPERATION .... 36 5. HOME SCREEN OPERATION ...... 37 6. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION ............................... 38 ENTERING LETTERS AND NUMBERS........................................... 38 LIST SCREEN........................................ 38 7. SCREEN ADJUSTMENT............... 41 8. LINKING MULTI-INFORMATION DISPLAY AND NAVIGATION SYSTEM ...................................... 43 30 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 31

    2 1 BASIC FUNCTION 2 2 Bluetooth® SETTINGS 3 1. REGISTERING/CONNECTING Bluetooth® DEVICE .................... 44 REGISTERING A Bluetooth® PHONE FOR THE FIRST TIME ....................... 44 REGISTERING A Bluetooth® AUDIO PLAYER FOR THE FIRST TIME ........ 45 PROFILES ............................................. 46 CERTIFICATION ................................... 48 2. SETTING Bluetooth® DETAILS.... 49 “Bluetooth* Setup” SCREEN ................. 49 OTHER SETTINGS 3 1. GENERAL SETTINGS .................. 57 GENERAL SETTINGS SCREEN ........... 57 4 2. VOICE SETTINGS......................... 63 VOICE SETTINGS SCREEN ................. 63 5 3. DRIVER SETTINGS ...................... 64 MANUALLY SELECT LINKED SETTINGS .......................................... 64 4. MAINTENANCE ............................ 65 6 7 ® REGISTERING A Bluetooth DEVICE............................................... 50 8 DELETING A Bluetooth® D ...
  • Page 32

    1. BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN 1 When the power switch is in ACCESSORY or ON mode, the initial screen will be displayed and the system will begin operating. MAINTENANCE INFORMATION This system reminds users when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the “Maintenance Reminder” screen will be displayed when the system is turned on.  Images shown on the initial screen can be changed to suit individual preferences. (P.60)  After a few seconds, the “Caution” screen will be displayed.  After about 5 seconds, the “Caution” screen automatically switches to the next screen. WARNING ● When the vehicle is stopped with the hybrid system operating, always apply the parking brake for safety.  The screen goes off if the screen is not operated for several seconds. ...
  • Page 33

    1. BASIC INFORMATION BEFORE OPERATION RESTARTING THE SYSTEM When system response is extremely slow, the system can be restarted. 1 2 BASIC FUNCTION Press and hold the “PWR VOL” knob for 3 seconds or more. 33 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 34

    1. BASIC INFORMATION BEFORE OPERATION 2. CAPACITIVE TOUCH SWITCHES The control panel uses capacitive touch sensors. INFORMATION ● Please do not push any of the side buttons when the system has just been turned on, because the buttons might become unresponsive. Please wait a few seconds before pressing any button.  Capacitive touch switch sensor sensitivity can be adjusted. (P.57) ■HANDLING OF THE CONTROL PANEL In the following cases, incorrect operation or non-response may occur.  If the operating section is dirty or has liquid attached to it, incorrect operation or non-response may occur.  If the operating section receives electromagnetic waves, incorrect operation or non-response may occur.  If wearing gloves during operation, nonresponse may occur.  If fingernails are used to operate the system, non-response may occur.  If a touch pen is used to operate the system, non-response may occur.  If the palm of your hand touches the operating section, ...
  • Page 35

    1. BASIC INFORMATION BEFORE OPERATION 3. TOUCH SCREEN GESTURES Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use 2 Changing and selecting various settings Drag* Touch the screen with your finger, and move the screen to the desired position.  Scrolling the lists  Scrolling the map screen Flick* Quickly move the screen by flicking with your finger.  Scrolling the main screen page  Scrolling the map screen *: The above operations may not be performed on all screens. INFORMATION ● Flick operations may not be performed smoothly in high altitudes. 35 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 BASIC FUNCTION Touch Quickly touch and release once. ...
  • Page 36

    1. BASIC INFORMATION BEFORE OPERATION 4. TOUCH SCREEN OPERATION This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.)  When a screen button is touched, a beep sounds. (To set the beep sound, see page 57.) NOTICE ● To prevent damaging the screen, lightly touch the screen buttons with your finger. ● Do not use objects other than your finger to touch the screen. ● Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen. INFORMATION ● If the system does not respond to touching a screen button, move your finger away from the screen and then touch it again. ● Dimmed screen buttons cannot be operated. ● The displayed image may become darker and moving images may be slightly distorted when the screen is cold. ● In extremely cold conditions, the map may not be displayed and the data input by a user may be deleted. Also, the ...
  • Page 37

    1. BASIC INFORMATION BEFORE OPERATION 5. HOME SCREEN OPERATION The home screen can display multiple information screens, such as the audio/visual system screen and handsfree screen, simultaneously. Press the “HOME” button. “Home” screen is displayed.  When a screen is selected, the selected screen will change to a full-screen display. The display items/area on the home screen can be changed. 1 Select 2 Select “Home Screen”. .  Select “Two Panel” or “Three Panel”. 3 4 5 2 BASIC FUNCTION 1 2 CUSTOMIZING THE HOME SCREEN Select the desired area. Select the desired item. Select “OK”. INFORMATION ● When the selected item is already being displayed and another area is selected for that item, the item that it is replacing will be displayed in the original item’s location. 37 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 38

    1. BASIC INFORMATION BEFORE OPERATION 6. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION When searching by an address, name, etc., or entering data, letters and numbers can be entered via the screen. ENTERING LETTERS AND NUMBERS : Select to enter in lower case. : Select to enter in upper case.  Keyboard layout can be changed. (P.57) LIST SCREEN The list screen may be displayed after entering characters. DISPLAYING THE LIST 1 No. Enter characters and select “OK”. Function Select to enter desired characters. Text field. Entered character(s) will be displayed. During entering character(s), when there is only one available option for the next character(s), the next character(s) will be displayed in gray text in the text field automatically. Gray text is entered by selecting this button. Select to erase one character. Select and hold to continue erasing characters.  Matching items from the database are listed even if the entered address or ...
  • Page 39

    1. BASIC INFORMATION BEFORE OPERATION INFORMATION ● The number of matching items is shown on the right side of the screen. If the number of matching items is more than 999, the system displays “” on the screen. LIST SCREEN OPERATION When a list is displayed, use the appropriate screen button to scroll through the list. BASIC FUNCTION ■SELECTING ALL ITEMS Some lists contain “Select All”. If “Select All” is selected, it is possible to select all items. 1 Select “Select All”. Icon Function Select to skip to the next or previous page. Select and hold or to scroll through the displayed list. This indicates the screen’s position. “Unselect All”: Unselect all items in the list. 2 If displayed appears to the right of an item name, the complete name is too long to display. Select to scroll to the end of the name. Select to move to the begin- ning of the name. 39 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 40

    1. BASIC INFORMATION BEFORE OPERATION SORTING The order of a list displayed on the screen can be sorted in the order of distance from the current location, date, category, etc. 1 Select “Sort”. CHARACTER JUMP BUTTONS IN LISTS Some lists contain character screen buttons, “ABC”, “DEF” etc., which allow a direct jump to list entries that begin with the same letter as the character screen button. 1 2 Select the desired character jump buttons. Select the desired sorting criteria. INFORMATION ● Every time the same character screen button is selected, the list starting with the subsequent character is displayed. 40 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 41

    1. BASIC INFORMATION BEFORE OPERATION 7. SCREEN ADJUSTMENT 1 No. Function Page Select to adjust the screen display. 42 2 Select to adjust the camera display. Press the “APPS” button. Select to adjust the video display. 76 Select to turn day mode on/ off. 41 BASIC FUNCTION The contrast and brightness of the screen display and the image of the camera display can be adjusted. The screen can also be changed to either day or night mode. (For information regarding audio/visual screen adjustment: P.76) INFORMATION ● When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses. 2 3 4 Select “Setup”. CHANGING BETWEEN DAY AND NIGHT MODE Select “Display”. Select the items to be set. Depending on the position of the headlight switch, the screen changes ...
  • Page 42

    1. BASIC INFORMATION BEFORE OPERATION ADJUSTING THE CONTRAST/ BRIGHTNESS Screen button Function “Brightness” “+” Select to brighten the screen. “Brightness” “-” Select to darken the screen. “Contrast” “+” Select to strengthen the contrast of the screen. “Contrast” “-” Select to weaken the contrast of the screen. The contrast and brightness of the screen can be adjusted according to the brightness of your surroundings. 1 2 Select “General” or “Camera”. Select the desired item. General 3 Select “OK”. Camera 42 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 43

    1. BASIC INFORMATION BEFORE OPERATION 8. LINKING MULTI-INFORMATION DISPLAY AND NAVIGATION SYSTEM* The following functions of the navigation system are linked with the multi-information display in the instrument cluster: • Navigation • Audio etc. 2 *: If equipped 43 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 BASIC FUNCTION These functions can be operated using multi-information display control switches on the steering wheel. For details, refer to “Owner’s Manual”. ...
  • Page 44

    2. Bluetooth® SETTINGS 1. REGISTERING/CONNECTING Bluetooth® DEVICE REGISTERING A Bluetooth® PHONE FOR THE FIRST TIME 4 5 To use the hands-free system, it is necessary to register a Bluetooth® phone with the system. Select “Yes” to register a phone. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth® device. Once the phone has been registered, it is possible to use the hands-free system. This operation cannot be performed while driving. For details about registering Bluetooth® device: P.50 1 a Turn the Bluetooth® connection setting of your cellular phone on.  This function is not available when Bluetooth® connection setting of your cellular phone is set to off. 2 Press the “APPS” button. 3 Select “Phone”.  For details about operating the Bluetooth® device, see the manual that comes with it.  To cancel the registration, select “Cancel”. 6 Register the Blue ...
  • Page 45

    2. Bluetooth® SETTINGS 7 Check that the screen is displayed when registration is complete.  The system waits for connection requests coming from the registered device.  At this stage, the Bluetooth® functions are not yet available. Turn the Bluetooth® connection setting of your audio player on.  This function is not available when the Bluetooth® connection setting of your audio player is set to off. 2 Press the “AUDIO” button. 3 Select “Source” on the audio screen or press “AUDIO” button again. 4 5 Select “ 6 Follow the steps in “REGISTERING A Select “OK” when the connection status changes from “Connecting...” to “Connected”.  If an error message is displayed, follow the guidance on the screen to try again. REGISTERING A Bluetooth® AUDIO PLAYER FOR THE FIRST TIME To use the Bluetooth® Audio, it is necessary to register an audio player with the system. Audio”. Select “Yes” to register an audio player. Bluetooth® D ...
  • Page 46

    2. Bluetooth® SETTINGS PROFILES This system supports the following services. Bluetooth® Device Bluetooth® Phone/ Bluetooth® Audio Player Bluetooth® Device Spec. Function Profile a Bluetooth® device Function Hands-free system OPP (Object Push Profile) Bluetooth® Audio Player Recommendations Ver. 2.0 Ver. 3.0 +EDR Requirements Recommendations Ver. 1.0 Ver. 1.6 Ver. 1.1 Ver. 1.2 Ver. 1.0 Ver. 1.1 Registering Bluetooth® Specification HFP (Hands-Free Profile) Bluetooth® Phone Requirements PBAP (Phone Book Access profile) Transferring the contacts MAP (Message Access Profile) Bluetooth® phone message  Ver. 1.0 SPP (Serial Port Profile) Entune App Suite  Ver. 1.1 Ver. 1.0 Ver. 1.2 Ver. 1.0 Ver. 1.4 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) Bluetooth® audio system 46 PRIUS v_Navi_OM47895U_(U) 14.09.2 ...
  • Page 47

    2. Bluetooth® SETTINGS INFORMATION The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. 47 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 2 BASIC FUNCTION ● If your cellular phone does not support HFP, registering the Bluetooth® phone or using OPP, PBAP, MAP or SPP profiles individually will not be possible. ● If the connected Bluetooth® device version is older than recommended or incompatible, the Bluetooth® device function may not work properly. ● Refer to http://www.toyota.com/entune/ to find approved Bluetooth® phones for this system. ...
  • Page 48

    2. Bluetooth® SETTINGS CERTIFICATION U.S.A. and Hawaii FCC ID: ACJ932YEAP01A473W NOTE:  <§15.19(a)(3)> This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING:  <§15.21> Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION:  <§2.1091> Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Canada NOTE:  ...
  • Page 49

    2. Bluetooth® SETTINGS 2. SETTING Bluetooth® DETAILS 1 Press the “APPS” button. “Bluetooth* Setup” SCREEN 2 Select “Setup”. 3 4 Select “Bluetooth*”. Function Registering a Bluetooth device 50 Bluetooth® 51 Deleting a Select the desired item to be set. Page ® device Connecting a Bluetooth® device 52 Editing the Bluetooth® device information 54 Bluetooth® system settings 55 *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 49 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 BASIC FUNCTION 2 ...
  • Page 50

    2. Bluetooth® SETTINGS DISPLAYING THE “Bluetooth* Setup” SCREEN IN A DIFFERENT WAY From the screen 1 2 3 4 phone/message settings Press the “APPS” button. Select “Setup”. Select “Phone”. Select “Connect Phone”. From the status display 1 Select status display area on the screen. REGISTERING A Bluetooth® DEVICE Up to 5 Bluetooth® devices can be registered. Bluetooth® compatible phones (HFP) and audio players (AVP) can be registered simultaneously. This operation cannot be performed while driving. 1 Display the “Bluetooth* Setup” screen. (P.49) 2 Select “Add”. When another Bluetooth® device is connected  To disconnect the Bluetooth® device, select “Yes”. When 5 Bluetooth® devices have already been registered  A registered device needs to be replaced. Select “Yes”, and select the device to be replaced. 3 When this screen is displayed, search for the device name displayed on this screen on the screen of your ...
  • Page 51

    2. Bluetooth® SETTINGS 4 Register the Bluetooth® device using your Bluetooth® device.  A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth® devices. Depending on the type of Bluetooth® device being connected, a message confirming registration may be displayed on the Bluetooth® device’s screen. Respond and operate the Bluetooth® device according to the confirmation message. 5 Check that the screen is displayed when registration is complete.  The system waits for connection requests coming from the registered device.  At this stage, the Bluetooth® functions are not yet available. 6 Select “OK” when the connection status changes from “Connection waiting...” to “Connected”. DELETING A Bluetooth® DEVICE 1 Display the “Bluetooth* Setup” screen. (P.49) 2 2 3 Select “Remove”. BASIC FUNCTION  For details about operating the Bluetooth® device, see the manual that comes with it.  To cancel the registr ...
  • Page 52

    2. Bluetooth® SETTINGS CONNECTING A Bluetooth® DEVICE Up to 5 Bluetooth® devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. 1 2 Display the “Bluetooth* Setup” screen. (P.49) Select the device to be connected. 3 Select the desired connection. When another Bluetooth® device is connected  To disconnect the Bluetooth® device, select “Yes”. 4 Check that a confirmation screen is displayed when the connection is complete.  If an error message is displayed, follow the guidance on the screen to try again. INFORMATION ● It may take time if the device connection is carried out during Bluetooth® audio playback. ● Depending on the type of Bluetooth® device being connected, it may be necessary to perform additional steps on the device. ● When disconnecting a Bluetooth® device, it is recommended to disconnect using the navigation system. ...
  • Page 53

    2. Bluetooth® SETTINGS ■AUTO CONNECTION MODE  When the power switch is in ACCESSORY or ON mode, the system searches for a nearby registered device.  The system will connect with the registered device that was last connected, if it is nearby. PHONE If a Bluetooth® phone is disconnected due to poor reception from the Bluetooth® network when the power switch is in ACCESSORY or ON mode, the system automatically reconnects the Bluetooth® phone. ■CONNECTING MANUALLY When the auto connection has failed or “Bluetooth* Power” is turned off, it is necessary to connect Bluetooth® manually. 1 Press the “APPS” button and select “Setup”. 2 3 Select “Bluetooth*”. Follow the steps in “CONNECTING A Bluetooth® DEVICE” from “STEP 2”. (P.52) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 53 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 2 BASIC FUNCTION To turn auto connection mode on, set “Bluetooth* Power” to on. (P.55) Leave t ...
  • Page 54

    2. Bluetooth® SETTINGS EDITING THE Bluetooth® DEVICE INFORMATION The Bluetooth® device’s information can be displayed on the screen. The displayed information can be edited. No. Information The name of the Bluetooth® device. Can be changed to a desired name. (P.55) Select to set the Bluetooth® audio player connection method. (P.55) 1 Display the “Bluetooth* Setup” screen. (P.49) Device address is unique to the device and cannot be changed. 2 3 Select the desired device to be edited. Phone number of the Bluetooth® phone. Select “Device Info”. Compatibility profile Bluetooth® device. of the Select to reset all setup items. INFORMATION 4 Confirm and change the Bluetooth® device information. ● If 2 Bluetooth® devices have been registered with the same device name, the devices can be distinguished referring to the device’s address. ● Depending on the type of phone, some information may not be displayed. *: Blueto ...
  • Page 55

    2. Bluetooth® SETTINGS CHANGING A DEVICE NAME 1 2 Select “Device Name”. Enter the name and select “OK”. ● Even if the device name is changed, the name registered in your Bluetooth® device does not change. The Bluetooth® settings can be confirmed and changed. 1 Display the “Bluetooth* Setup” screen. (P.49) 2 3 Select “System Settings”. Select the desired item to be set. SETTING AUDIO PLAYER CONNECTION METHOD 1 Select “Connect From”. 2 Select the desired connection method. Audio Player “Vehicle”: Select to connect the audio system to the audio player. “Device”: Select to connect the audio player to the audio system.  Depending on the audio player, the “Vehicle” or “Device” connection method may be best. As such, refer to the manual that comes with the audio player.  To reset the connection method, select “Default”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 55 PRIUS v_Navi_OM47895U_(U) 14 ...
  • Page 56

    2. Bluetooth® SETTINGS No. Information Bluetooth® Select to set connection on/off. CHANGING “Bluetooth* Power” Page 56 Displays system name. Can be changed to a desired name. 56 PIN-code used when the Bluetooth® device was registered. Can be changed to a desired code. 56 Device address is unique to the device and cannot be changed.  1 Select “Bluetooth* Power”. When “Bluetooth* Power” is on: The Bluetooth® device is automatically connected when the power switch is in ACCESSORY or ON mode. When “Bluetooth* Power” is off: The Bluetooth® device is disconnected, and the system will not connect to it next time. INFORMATION Select to set the phone connection status display on/off.  Select to set the connection status display of the audio player on/off.  Compatibility profile of the system device.  Select to reset all setup items.  ● While driving, the auto connection state can be changed from off ...
  • Page 57

    3. OTHER SETTINGS 1. GENERAL SETTINGS Settings are available for system time, operation sounds, etc. 1 GENERAL SETTINGS SCREEN Press the “APPS” button. 2 BASIC FUNCTION 2 3 4 Select “Setup”. Select “General”. Select the items to be set. 57 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 58

    3. OTHER SETTINGS No. Function Select to change the time zone and set the daylight saving time on/off. (P.59) No. Function Select to set the animations on/off. Select to customize the startup image. (P.60) Select to change the language. Select to change the unit of measure for distance/fuel consumption*. Select to change the unit of temperature. Select to set the sound beeps on/off. Select to change the screen button color. Select to change the keyboard layout. Select to set automatic screen changes from the audio control screen to the home screen to on/off. When set to on, the screen will automatically return to the home screen from the audio control screen after 20 seconds. Select to change the capacitive touch button sensor sensitivity. Select to customize the screen off image. (P.60) Select to delete personal data. (P.62) Select to update software versions. For details, contact your Toyota dealer. Select to update “Gracenote” databas ...
  • Page 59

    3. OTHER SETTINGS SYSTEM TIME SETTINGS Used for changing time zones and the on/off settings of daylight saving time. Display the “General Settings” screen. (P.57) 2 3 Select “System Time”. 1 2 Select “Time Zone”. Select the desired time zone. 2 BASIC FUNCTION 1 ■SETTING THE TIME ZONE Select the items to be set. No. Function Select to change the time zone. (P.59) Select to set daylight saving time on/ off. 4 Select “OK”. 59 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 60

    3. OTHER SETTINGS CUSTOMIZING THE STARTUP AND SCREEN OFF IMAGES ■TRANSFERRING IMAGES 1 An image can be copied from a USB memory and used as the startup and screen off images. Open the cover and connect a USB memory. When the power switch is in ACCESSORY or ON mode, the initial screen will be displayed. (P.32)  Turn on the power of the USB memory if it is not turned on. 2 3 4 5 6 7 Press the “APPS” button. Select “Setup”. Select “General”. Select “Customize Startup Image” or “Customize Screen Off Image”. Select “Transfer”. Select “Yes”. 60 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 61

    3. OTHER SETTINGS INFORMATION 1 Display the “General Settings” screen. (P.57) 2 3 Select “Customize Startup Image”. 2 Select the desired image. BASIC FUNCTION ● When saving the images to a USB, name the folder that the startup image is saved to “StartupImage” and name the folder that the screen off image is saved to “DisplayOffImage”. If these folder names are not used, the system cannot download the images. (The folder names are case sensitive.) ● The compatible file extensions are JPG and JPEG. ● Image files of 5 MB or less can be transferred. ● Up to 3 images can be downloaded. ● Files with non-ASCII filenames can not be downloaded. ■SETTING THE STARTUP IMAGES 4 Select “OK”. ■SETTINGS THE SCREEN OFF IMAGES 1 Display the “General Settings” screen. (P.57) 2 Select “Customize Screen Off Image”. 3 Select the desired image. 4 Select “OK”. 61 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 62

    3. OTHER SETTINGS ■DELETING TRANSFERRED IMAGES 1 Display the “General Settings” screen. (P.57) 2 Select “Customize Startup Image” or “Customize Screen Off Image”. 3 Select “Delete All”. 4 Select “Yes” when the confirmation screen appears.  Registered or changed personal settings will be deleted or returned to their default conditions. For example: • General settings • Navigation settings • Audio settings • Phone settings NOTICE 4 Select “Yes”. ● Make sure the map SD card is inserted when deleting personal data. The personal data cannot be deleted when the map SD card is removed. To delete the data, after inserting the map SD card, turn the power switch off and then turn the power switch to ACCESSORY or ON mode. DELETING PERSONAL DATA 1 Display the “General Settings” screen. (P.57) 2 3 Select “Delete Personal Data”. Select “Delete”. 62 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 63

    3. OTHER SETTINGS 2. VOICE SETTINGS Voice volume, etc. can be set. 1 VOICE SETTINGS SCREEN Press the “APPS” button. 2 BASIC FUNCTION 2 3 4 Select “Setup”. Select “Voice”. Select the items to be set. INFORMATION ● “Voice Settings” screen can also be displayed from the voice recognition top screen. (P.136) No. Function Select to adjust the volume of voice guidance. Select to set the voice guidance during route guidance on/off. Select to set the voice recognition prompts. Select to train voice recognition. The voice command system adapt the user accent. (P.136) Select to set the voice prompt interrupt on/off. Select to set the web search engine. The search engines are Entune App Suite applications. (P.267) Select to set the voice recognition tutorial. Select to reset all setup items. 63 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 64

    3. OTHER SETTINGS 3. DRIVER SETTINGS The driver settings feature will allow the system to link some preferences (such as audio presets, button colors, language, etc.) to a paired Bluetooth® phone. 1 Press the “APPS” button. 2 3 4 Select “Setup”. Select “Driver”. MANUALLY SELECT LINKED SETTINGS 1 Display the driver settings screen. (P.64) 2 Select “Manually Select Linked Settings”. 3 Select the desired phone.  After a few seconds, loaded screen automatically switches to the home screen. Select “Enable this Feature”. 64 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 65

    3. OTHER SETTINGS 4. MAINTENANCE When this system is turned on, the “Maintenance Reminder” screen displays when it is time to replace a part or certain components. (P.32) 1 Press the “APPS” button. No. Function Select to set the condition of parts or components. Select to add new information items separately from provided ones. Select to reset the item which have expired conditions. Select to call the registered dealer. Select to register/edit dealer information. (P.66) 2 3 Select “Maintenance”. Select the desired item. When set to on, the indicator will illuminate. The system is set to give maintenance information with the “Maintenance Reminder” screen. (P.32) INFORMATION ● When the vehicle needs to be serviced, the screen button color will change to orange. 65 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 BASIC FUNCTION Select to cancel all conditions which have been entered. 2 ...
  • Page 66

    3. OTHER SETTINGS MAINTENANCE INFORMATION SETTING 1 Select the desired part or component screen button.  When the vehicle needs to be serviced, the screen button color will change to orange. 2 Set the conditions. INFORMATION ● For scheduled maintenance information, refer to “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. ● Depending on driving or road conditions, the actual date and distance that maintenance should be performed may differ from the stored date and distance in the system. DEALER SETTING Dealer information can be registered in the system. With dealer information registered, route guidance to the dealer is available. No. Function Select to enter the next maintenance date. 1 2 Select “Set Dealer”. Select the desired item to search for the location. (P.207) Select to enter the driving distance until the next maintenance check. Select to cancel the conditions which have been entered. Select to reset ...
  • Page 67

    3. OTHER SETTINGS 3 ■EDITING DEALER OR CONTACT Select the items to be edited. NAME 1 2 Select “Edit” next to “Dealer” or “Contact”. Enter the name and select “OK”. Function Page Select to enter the name of a dealer. 67 Select to enter the name of a dealer member. 67 Select to set the location. 67 Select to enter the phone number. 67 Select to delete the dealer information displayed on the screen.  Select to set the displayed dealer as a destination. 219 1 2 Select “Edit” next to “Location”. Scroll the map to the desired point (P.199) and select “OK”. ■EDITING PHONE NUMBER 1 2 Select “Edit” next to “Phone #”. Enter the phone number and select “OK”. 67 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 BASIC FUNCTION ■EDITING THE LOCATION No. 2 ...
  • Page 68

    1 BASIC OPERATION 1. QUICK REFERENCE ..................... 70 2. SOME BASICS............................... 71 TURNING THE SYSTEM ON AND OFF ...................................... 71 SELECTING AN AUDIO SOURCE........ 72 DISC SLOT ............................................ 73 USB/AUX PORT .................................... 74 SOUND SETTINGS ............................... 74 2 RADIO OPERATION 1. AM/FM RADIO............................... 78 OVERVIEW ............................................ 78 PRESETTING A STATION .................... 81 SELECTING A STATION FROM THE LIST ................................. 81 CACHING A RADIO PROGRAM ........... 82 RADIO BROADCAST DATA SYSTEM .............................................. 83 AUDIO SCREEN ADJUSTMENT .......... 76 TRAFFIC ANNOUNCEMENT (FM RADIO)......................................... 84 VOICE COMMAND SYSTEM ................ 77 USING HD Radio™ TECHNOLOGY...... 85 AVAILABLE HD Radio™ TECHNOL ...
  • Page 69

    3 1 AUDIO/VISUAL SYSTEM 2 3 MEDIA OPERATION 1. CD .................................................. 96 4 AUDIO REMOTE CONTROLS 3 1. STEERING SWITCHES............... 117 4 OVERVIEW ........................................... 96 PLAYING AN AUDIO CD ...................... 98 5 SETUP PLAYING AN MP3/WMA/AAC DISC ..... 98 2. USB MEMORY............................... 99 5 1. AUDIO SETTINGS ...................... 120 AUDIO SETTINGS SCREEN............... 120 OVERVIEW ........................................... 99 6 PLAYING A USB AUDIO ..................... 102 3. iPod.............................................. 103 6 TIPS FOR OPERATING THE AUDIO SYSTEM 7 OVERVIEW ......................................... 103 4. iPod AUDIO ......................................... 107 1. OPERATING INFORMATION ..... 122 iPod VIDEO ......................................... 107 RADIO......................................... ...
  • Page 70

    1. BASIC OPERATION 1. QUICK REFERENCE Press the “AUDIO” button to display the audio screen. Function Using the radio Page 78, 88, 95 Playing an audio CD or MP3/WMA/AAC disc 96 Playing a USB memory 99 Playing an iPod 103 Playing a Bluetooth® device 108 Using the AUX port 113 Playing the VTR 115 Using the steering wheel audio switches 117 Audio system settings 120 INFORMATION ● The display and button positions will differ depending on the type of the system. 70 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 ...
  • Page 71

    1. BASIC OPERATION 2. SOME BASICS This section describes some of the basic features of the audio/visual system. Some information may not pertain to your system. TURNING THE SYSTEM ON AND OFF Your audio/visual system works when the power switch is turned to ACCESSORY or ON mode. 3 ● To prevent the 12-volt battery from being discharged, do not leave the audio/ visual system on longer than necessary when the hybrid system is not operating. CERTIFICATION U.S.A. and Hawaii FCC Warning: Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. “PWR VOL” knob: Press to turn the audio/ visual system on and off. The system turns on in the last mode used. Turn this knob to adjust the volume. “AUDIO” button: Press to display screen buttons for the audio/visual system.  A function that enables automatic return to the home screen from the audio screen can be selected. (P.57) U.S.A., Hawaii ...
  • Page 72

    1. BASIC OPERATION REORDERING THE AUDIO SOURCE SELECTING AN AUDIO SOURCE 1 Press the “AUDIO” button. 2 Select “Source” on the audio screen or press “AUDIO” button again. 3 Select the desired source. 1 Display the “Select Audio Source” screen. (P.72) 2 Select “Reorder”. 3 Select the desired audio source then or 4 to reorder. Select “OK”. INFORMATION ● Dimmed screen buttons cannot be operated. ● When there are two pages, select or to change the page. 72 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 ...
  • Page 73

    1. BASIC OPERATION EJECTING A DISC DISC SLOT 1 INSERTING A DISC 1 Press the disc. button and remove the Insert a disc into the disc slot. 3 ● Never try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot. INFORMATION ● The player is intended for use with 4.7 in. (12 cm) discs only. ● When inserting a disc, gently insert the disc with the label facing up. 73 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 AUDIO/VISUAL SYSTEM NOTICE  After insertion, the disc is automatically loaded. ...
  • Page 74

    1. BASIC OPERATION USB/AUX PORT 1 SOUND SETTINGS Open the cover and connect a device. AUTOMATIC SOUND LEVELIZER (ASL) The system adjusts to the optimum volume and tone quality according to vehicle speed to compensate for increased vehicle noise. 1  Turn on the power of the device if it is not turned on. INFORMATION ● If a USB hub is plugged-in, two devices can be connected at a time. ● Even if a USB hub is used to connect more than two USB devices, only the first two connected devices will be recognized. Display the “Audio Settings” screen. (P.120) Type A 2 3 Select “Automatic Sound Levelizer”. Select “High”, “Mid”, “Low”, or “Off”. Type B 2 3 Select “Automatic Sound Levelizer”. Select on or off. SURROUND* 1 Display the “Audio Settings” screen. (P.120) 2 Select “Surround”. *: If equipped 74 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 ...
  • Page 75

    1. BASIC OPERATION TONE AND BALANCE TONE: 1 Select “Sound” on the audio control screen. 2 Select the desired screen button. How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal programs usually sound better with different mixes of treble, mid and bass. 3 A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of 1 group of sounds while decreasing the volume of another. No. Function Select “+” or “-” to adjust highpitched tones. Select “+” or “-” to adjust midpitched tones. Select “+” or “-” to adjust lowpitched tones. Select to adjust the sound balance between the front and rear speakers. Select to adjust the sound balance between the left and right speakers. 75 PR ...
  • Page 76

    1. BASIC OPERATION CONTRAST, BRIGHTNESS, COLOR AND TONE ADJUSTMENT AUDIO SCREEN ADJUSTMENT SCREEN SIZE SETTINGS The screen size can be selected for each type of media. iPod video/VTR 1 Select “Screen Format” on the control screen. 2 Select the desired item to be adjusted. No. The brightness, contrast, color and tone of the screen can be adjusted. iPod video/VTR 1 Select “Video” on the “Display Settings” screen. (P.41) 2 Select the desired item to be adjusted. Function Select to display a 4 : 3 screen, with either side in black. Select to enlarge the image horizontally and vertically to full screen. Select to enlarge the image by the same ratio horizontally and vertically. 76 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 ...
  • Page 77

    1. BASIC OPERATION Function “Brightness” “+” Select to brighten the screen. “Brightness” “-” Select to darken the screen. “Contrast” “+” Select to strengthen the contrast of the screen. “Contrast” “-” Select to weaken the contrast of the screen. “Tone” “+” Select to strengthen the tone of the screen. “Tone” “-” Select to weaken the tone of the screen. “Color” “G” Select to strengthen the green color of the screen. “Color” “R” Select to strengthen the red color of the screen. 3 VOICE COMMAND SYSTEM 1 Press this switch to operate the voice command system. 3  The voice command system and its list of commands can be operated. (P.134) Select “OK”. 77 PRIUS v_Navi_OM47895U_(U) 14.10.01 16:00 AUDIO/VISUAL SYSTEM Screen button ...
  • Page 78

    2. RADIO OPERATION 1. AM/FM RADIO OVERVIEW Select “AM” or “FM” on the “Select Audio Source” screen. (P.72) ■CONTROL SCREEN Top screen Option screen ■CONTROL PANEL 78 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 79

    2. RADIO OPERATION No. Function Select to scroll the page of preset buttons. Select to display the option screen. Select to display the audio source selection screen. 3 Select to display the cache radio operation buttons. (P.82) AUDIO/VISUAL SYSTEM Select to display the sound setting screen. Cache radio only: Select to turn mute on/off. Select to display a list of receivable stations/channels. Select to store information of the audio currently being broadcast on the radio. Select to tune to preset stations/channels. Select to scan for receivable stations/channels. Select to turn HD Radio mode on/off. When the “HD Radio™” indicator is off, the station list shows only analog broadcasts. Analog FM only: Select to display RBDS text messages. Select to display the additional text information.  Turn to step up/down frequencies.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it. Press to turn mute o ...
  • Page 80

    2. RADIO OPERATION INFORMATION ● The radio automatically changes to stereo reception when a stereo broadcast is received. ● The radio automatically blends to an HD Radio signal in AM or FM where available. 80 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 81

    2. RADIO OPERATION PRESETTING A STATION Radio mode has a mix preset function, which can store up to 36 stations (6 stations per page x 6 pages) from any of the AM, FM or SAT bands. Tune in the desired station. A station list can be displayed. 1 2 Select “Station List”. 3 Select the desired station and select “OK”. FM radio only: Select the desired program genre. Select “(add new)”.  To change the preset station to a different one, select and hold the preset station. 3 Select “Yes” on the confirmation screen. 4 Select “OK” after setting the new preset station. 3 AUDIO/VISUAL SYSTEM 1 2 SELECTING A STATION FROM THE LIST INFORMATION ● The number of preset radio stations displayed on the screen can be changed. (P.121) 81 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 82

    2. RADIO OPERATION ■REFRESHING THE STATION LIST 1 Select “Refresh” on the station list screen and the following screen will be displayed. PLAYING BACK THE CACHE MANUALLY The broadcast cached in the program cache can be played back manually. 1 Display the cache radio operation buttons. (P.78) 2 Select the desired cache radio operation button. “Cancel Refresh”: Select to cancel the refresh. “Source”: Select to change to another audio source while refreshing. INFORMATION ● The audio system sound is muted during refresh operation. ● In some situations, it may take some time to update the station list. No. Function Hides the cache operation buttons Skips backward 2 minutes CACHING A RADIO PROGRAM A radio program can be cached and played back in a time-shifted manner. Fast rewinds continuously Returns to the live radio broadcast Fast forwards continuously Skips forward 2 minutes Red vertical bar: Shows what portion of the cached ...
  • Page 83

    2. RADIO OPERATION AUTOMATIC PLAYBACK OF THE CACHE INFORMATION ● The system can store up to 20 minutes. Cached data will be erased when the radio mode or station is changed or when the audio system is turned off. ● If noise or silence occurs during the caching process, cache writing will continue, with the noise or silence recorded as is. In this case, the cached broadcast will contain the noise or silence when played back. This audio system is equipped with Radio Broadcast Data Systems (RBDS). RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters. When RBDS is on, the radio can — only select stations of a particular program type, — display messages from radio stations, — search for a stronger signal station. RBDS features are available only when listening to an FM station that broadcasts RBDS information and the “FM Info” indicator is on. 83 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 3 AUDIO/VISUAL ...
  • Page 84

    2. RADIO OPERATION SELECTING A DESIRED GENRE 1 2 Select “Station List”. FM radio only: Select a desired genre of station and select a desired station.  The genre list is in the following order: • Classical • Country • EasyLis (Easy Listening) • Inform (Information) • Jazz • News • Oldies • Other • Pop Music • Religion • Rock • R&B (Rhythm and Blues) • Sports • Talk • Traffic (Not available when “HD Radio™” indicator is off.) • Alert (Emergency Alert) TRAFFIC ANNOUNCEMENT (FM RADIO) A station that regularly broadcasts traffic information is automatically located. 1 2 Select “Station List”. Select the desired traffic program station. INFORMATION ● If a traffic program station is found, the name of the traffic program station will be displayed for a while. 84 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 85

    2. RADIO OPERATION USING HD Radio™ TECHNOLOGY MULTICAST On the FM radio frequency most digital stations have “multiple” or supplemental programs on one FM station. 3 AUDIO/VISUAL SYSTEM HD Radio™ Technology is the digital evolution of analog AM/FM radio. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio with no static or distortion. For more information, and a guide to available radio stations and programming, refer to www.hdradio.com. AVAILABLE HD Radio™ TECHNOLOGY 1 Select the “HD)” logo. 2 Select the desired channel.  Turning the “TUNE/SCROLL” knob can also select the desired multicast channel. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign ...
  • Page 86

    2. RADIO OPERATION PRESERVING A MUSIC INFORMATION Tag information in the music broadcasting is preserved in the system and transmits to an iPod. 1 Select “Tag” to bookmark the music information. 2 Connect an iPod. (P.74)  Turn on the power of the iPod if it is not turned on.  Once an iPod is connected, the music tag moves from the radio into the iPod.  When the iPod is connected to iTunes, the “tagged” information of the songs which were tagged while listening to the radio can be viewed. Then a user may decide to purchase the song or CD/Album which had been listened to on their radio. INFORMATION ● The tag information can not be preserved while scanning or caching the radio station. ● If tagging the music information fails, “Saving the HD Radio tag was unsuccessful.” will be displayed on the screen. If this occurs, tag the information again. ● HD Radio™ stations can be preset. ● An orange “HD)” logo indicator will be displayed on the scre ...
  • Page 87

    2. RADIO OPERATION TROUBLESHOOTING GUIDE Cause Action Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip. The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode. None, radio broadcast issue. A user can contact the radio station. Sound fades, blending in and out. Radio is shifting between analog and digital audio. Reception issue, may clear-up as the vehicle continues to be driven. Turning the indicator of the “HD Radio™” button off can force radio in an analog audio. Audio mute condition when an HD2/HD3 multicast channel had been playing. The radio does not have access to digital signals at the moment. This is normal behavior, wait until the digital signal returns. If out of the coverage area, seek a new station. Audio mute delay when selecting an HD2/HD3 multicast channel preset. The digital multicast content is not avai ...
  • Page 88

    2. RADIO OPERATION 2. XM Satellite Radio OVERVIEW Select “XM” on the “Select Audio Source” screen. (P.72) ■CONTROL SCREEN ■CONTROL PANEL 88 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 89

    2. RADIO OPERATION No. Function Select to scroll the page of preset buttons. Select to display the option screen.  Select to scan for receivable channels.  Select “Additional Information” to display the information. 3 Select to display the audio source selection screen. Select to display a list of receivable channels. Select to tune to preset channels.  Turn to step up/down channels.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.  Press to seek for a channel.  Press and hold for continuous seek. Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. 89 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 AUDIO/VISUAL SYSTEM Select to display the sound setting screen. ...
  • Page 90

    2. RADIO OPERATION HOW TO SUBSCRIBE TO AN XM Satellite Radio To listen to a satellite radio broadcast in the vehicle, a subscription to the XM Satellite Radio service is necessary. An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and some Canadian provinces. HOW TO SUBSCRIBE It is necessary to enter into a separate service agreement with XM Satellite Radio in order to receive satellite broadcast programming in the vehicle. Additional activation and service subscription fees apply that are not included in the purchase price of the vehicle and digital satellite tuner. NOTICE ● XM Radio Services  Legal Disclaimers and Warnings • Fees and Taxes  Subscription fee, taxes, one time activation fee, and other fees may apply. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions subject to Customer Agreem ...
  • Page 91

    2. RADIO OPERATION NOTICE INFORMATION ● XM Radio ServicesDescriptions • Radio and Entertainment XM offers more than 170 satellite radio channels of commercial-free music and premier sports, news, talk, and entertainment. XM is broadcast via satellites to millions of listeners across the continental United States. XM subscribers listen to XM on satellite radio receivers for the car, home, and portable use. More information about XM is available online at www.siriusxm.com (U.S.A.) or www.xmradio.ca (Canada). ● XM Radio ServicesSubscription Instructions • For XM Services requiring a subscription (such as XM Radio, and some Infotainment & data services), the following paragraph shall be included. Required XM Radio and some Infotainment & data services monthly subscriptions sold separately after trial period. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions are subject to the Customer Agreement available at www.si ...
  • Page 92

    2. RADIO OPERATION INFORMATION ● XM Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XM Satellite Radio customer service agreement. ● Customers should have their radio ID ready; the radio ID can be found by tuning to “Ch 000” on the radio. For details, see “DISPLAYING THE RADIO ID” below. ● All fees and programming are the responsibility of XM Satellite Radio and are subject to change. SATELLITE TUNER TECHNOLOGY NOTICE Toyota’s satellite radio tuners are awarded Type Approval Certificates from XM Satellite Radio Inc. as proof of compatibility with the services offered by XM Satellite Radio. DISPLAYING THE RADIO ID Each XM tuner is identified with a unique radio ID. The radio ID is required when activating an XM service or when reporting a problem.  If “Ch 000” is selected using the “TUNE SCROLL” knob, the ID code, which is 8 al ...
  • Page 93

    2. RADIO OPERATION SELECTING A CHANNEL FROM THE LIST 1 2 3 Select “Channel List”. Select the desired program genre. Select the desired channel and select “OK”. 3 AUDIO/VISUAL SYSTEM 93 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 94

    2. RADIO OPERATION IF THE SATELLITE RADIO TUNER MALFUNCTIONS When problems occur with the XM tuner, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. Message Explanation The XM antenna is not connected. Check whether the XM antenna cable is attached securely. “Check Antenna” A short circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer for assistance. You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryption code. Contact XM Satellite Radio for subscription information. When a contract is canceled, you can choose “Ch 000” and all free-to-air channels. “Ch Unauthorized” The premium channel you selected is not authorized. Wait for about 2 seconds until the radio returns to the previous channel or “Ch 001”. If it does not change automatically, select another channel. To listen to the premium channel, contac ...
  • Page 95

    2. RADIO OPERATION 3. INTERNET RADIO LISTENING TO INTERNET RADIO One of Entune App Suite features is the ability to listen to internet radio. In order to use this service, a compatible phone and the system needs to be set up. For details: P.267 Select the internet radio application. ● Other applications can be activated while listening to internet radio. ● If an iPhone is connected via Bluetooth® and USB at the same time, system operation may become unstable. For known phone compatibility information, refer to http://www.toyota.com/entune/. ● Some parts of applications can be adjusted using the switches on the steering wheel. ● For additional information, refer to http://www.toyota.com/entune/ or call 1-800-331-4331.  The internet radio application screen is displayed.  Perform operations according to the displayed application screen.  For the instrument panel operation method: P.72  If a compatible phone is already registered, it will be connecte ...
  • Page 96

    3. MEDIA OPERATION 1. CD OVERVIEW The CD operation screen can be reached by the following methods: Insert a disc. (P.73) Select “CD” on the “Select Audio Source” screen. (P.72) ■CONTROL SCREEN ■CONTROL PANEL 96 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 97

    3. MEDIA OPERATION No. Function  Displays cover art  Select to display a track/file list. Select to display the audio source selection screen. Select to display the sound setting screen. 3 Select to play/pause. AUDIO/VISUAL SYSTEM Shows progress Select to set repeat playback. Select to set random playback.  Audio CD: Select to display a track list.  MP3/WMA/AAC disc: Select to display a folder list. To return to the top screen, select “Now Playing” on the list screen. Disc slot  Turn to select a track/file.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it. Press to play/pause.  Press to select a track/file.  Press and hold to fast forward/rewind. Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. Press to eject a disc. INFORMATION ● If a disc contains CD-DA files and MP3/WMA/AAC fi ...
  • Page 98

    3. MEDIA OPERATION PLAYING AN AUDIO CD PLAYING AN MP3/WMA/AAC DISC REPEATING The track currently being listened to can be repeated. 1 Select the repeat button to change on/ off. REPEATING The file currently being listened to can be repeated. 1 Select the repeat button to change on/ off. RANDOM ORDER Tracks can be automatically and randomly selected. 1 Select the random button to change on/off. RANDOM ORDER Files can be automatically and randomly selected. 1 Select the random button to change on/off. 98 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 99

    3. MEDIA OPERATION 2. USB MEMORY OVERVIEW The USB memory operation screen can be reached by the following methods: Connect a USB memory. (P.74) Select “USB (DEVICE NAME)” on the “Select Audio Source” screen. (P.72) 3 ■CONTROL SCREEN AUDIO/VISUAL SYSTEM ■CONTROL PANEL 99 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 100

    3. MEDIA OPERATION No. Function Select to display the audio source selection screen. Select to display the sound setting screen. Select to play/pause. Shows progress Select to set repeat playback. Select to set random playback. Select to display the play mode selection screen. To return to the top screen, select “Now Playing” on the list screen.  Displays cover art  Select to display file/track list.  Turn to select a file/track.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it. Press to play/pause.  Press to select a file/track.  Press and hold to fast forward/rewind. Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. 100 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 101

    3. MEDIA OPERATION WARNING ● Do not operate the player’s controls or connect the USB memory while driving. NOTICE INFORMATION ● If tag information exists, the file names will be changed to track names. 101 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 3 AUDIO/VISUAL SYSTEM ● Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player. ● Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. ● Do not insert foreign objects into the port as this may damage the portable player or its terminal. ...
  • Page 102

    3. MEDIA OPERATION PLAYING A USB AUDIO REPEATING The file/track currently being listened to can be repeated. 1 Select the repeat button to change on/ off. RANDOM ORDER Files/tracks can be automatically and randomly selected. 1 Select the random button to change on/off. 102 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 103

    3. MEDIA OPERATION 3. iPod OVERVIEW The iPod operation screen can be reached by the following methods: Connect an iPod. (P.74) Select “iPod (DEVICE NAME)” on the “Select Audio Source” screen. (P.72) 3 ■CONTROL SCREEN AUDIO/VISUAL SYSTEM iPod audio iPod video 103 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 104

    3. MEDIA OPERATION ■CONTROL PANEL Function No. Audio Video  Displays cover art  Select to display a track list.  Select to display the audio source selection screen. Select to display the audio source selection screen. Select to display the sound setting screen. Select to display the sound setting screen. Select to play/pause. Select to play/pause. Shows progress Shows progress Select to set repeat playback.  Select to set random playback.  Select to display the play mode selection screen. To return to the top screen, select “Now Playing” on the list screen. Select to display the play mode selection screen. To return to the top screen, select “Now Playing” on the list screen.  Select to display full screen video.  Select to change the screen size. (P.76) 104 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 105

    3. MEDIA OPERATION Function No. Audio Video  Turn to select a track.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.  Turn to select a file.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it. Press to play/pause. Press to play/pause.  Press to select a track.  Press and hold to fast forward/rewind.  Press to select a file.  Press and hold to fast forward/rewind. Press to select an audio mode. Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. 3 ● Do not operate the player’s controls or connect the iPod while driving. NOTICE ● Do not leave your portable player in the car. In particular, high ...
  • Page 106

    3. MEDIA OPERATION INFORMATION ● The system can only output the sound while driving. ● When an iPod is connected using a genuine iPod cable, the iPod starts charging its battery. ● Depending on the iPod, the video sound may not be able to be heard. ● Depending on the iPod and the songs in the iPod, iPod cover art may be displayed. This function can be changed to on/off. (P.120) It may take time to display iPod cover art, and the iPod may not be operated while the cover art display is in process. ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used. ● Depending on the iPod that is connected to the system, certain functions may not be available. ● Files/tracks selected by operating a connected iPod may not be recognized or displayed properly. ● For viewing videos from an iPod, it is necessary to set “iPod Sound Input” to “AUX”. (P.120) ● If an iPhone is connected via Bluetooth® an ...
  • Page 107

    3. MEDIA OPERATION iPod AUDIO REPEATING The track currently being listened to can be repeated. 1 iPod VIDEO To change to iPod video mode, select “Browse” on the iPod audio screen, then select the “Videos” tab and select the desired video file. 3 AUDIO/VISUAL SYSTEM Select the repeat button to change on/ off. RANDOM ORDER Tracks can be automatically and randomly selected. 1 Select the shuffle button to change on/ off. 107 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 108

    3. MEDIA OPERATION 4. Bluetooth® AUDIO The Bluetooth® audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth®, the Bluetooth® audio system will not function. OVERVIEW Select “ Audio” on the “Select Audio Source” screen. (P.72) Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual. ■CONTROL SCREEN 108 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 109

    3. MEDIA OPERATION ■CONTROL PANEL 3 AUDIO/VISUAL SYSTEM No. Function Select to display the audio source selection screen. Displays Bluetooth® device condition. Select to display the sound settings screen. Select to play/pause. Shows progress Select to set repeat playback. Select to set random playback. Select to display the playlist screen. To return to the top screen, select “Now Playing” on the list screen. Select to display the portable device connection screen.  Displays cover art  Select to display a track list.  Turn to select a track.  Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it. Press to play/pause.  Press to select a track.  Press and hold to fast forward/rewind. 109 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 110

    3. MEDIA OPERATION No. Function Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. WARNING ● Do not operate the player’s controls or connect to the Bluetooth® audio system while driving. ● Your audio unit is fitted with Bluetooth® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices. ● Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on t ...
  • Page 111

    3. MEDIA OPERATION INFORMATION ● Depending on the Bluetooth® device that is connected to the system, the music may start playing when selecting selecting while it is paused. Conversely, the music may pause when while it is playing. ● In the following conditions, the system may not function: 3 • The Bluetooth® device is turned off. • The Bluetooth® device has a low battery. ● It may take time to connect the phone when Bluetooth® audio is being played. ● For operating the portable player, see the instruction manual that comes with it. ● If the Bluetooth® device is disconnected due to poor reception from the Bluetooth® network when the power switch is in ACCESSORY or ON mode, the system automatically reconnects the portable player. ● If the Bluetooth® device is disconnected on purpose, such as it was turned off, this does not happen. Reconnect the portable player manually. ● Bluetooth® device information is registered when the Bluetooth® device is connected to ...
  • Page 112

    3. MEDIA OPERATION CONNECTING A Bluetooth® DEVICE LISTENING TO Bluetooth® AUDIO To use the Bluetooth® audio system, it is necessary to register a Bluetooth® device with the system. Registering an additional device 1 Select “Select Device” on the REPEATING The track currently being listened to can be repeated. 1 Bluetooth® audio control screen. 2 For more information: P.50 RANDOM ORDER Selecting a registered device 1 Select “Select Device” on Bluetooth® audio control screen. 2 For more information: P.52 Select the repeat button to change on/ off. the Tracks can be automatically and randomly selected. 1 Select the random button to change on/off. 112 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 113

    3. MEDIA OPERATION 5. AUX OVERVIEW Select “AUX” on the “Select Audio Source” screen. (P.72) ■CONTROL SCREEN 3 AUDIO/VISUAL SYSTEM ■CONTROL PANEL 113 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 114

    3. MEDIA OPERATION No. Function Select to display the audio source selection screen. Select to display the sound setting screen. Press to turn mute on/off. Press to select an audio mode.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. WARNING ● Do not connect portable audio device or operate the controls while driving. NOTICE ● Do not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal. ● Do not insert foreign objects into the port as this may damage the portable audio device or its terminal. 114 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 115

    3. MEDIA OPERATION 6. VTR OVERVIEW The VTR operation screen can be reached by the following methods: Connect a device to the AUX port. (P.74) Select “A/V” on the “Select Audio Source” screen. (P.120) 3 ■CONTROL SCREEN AUDIO/VISUAL SYSTEM 115 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 116

    3. MEDIA OPERATION ■CONTROL PANEL No. Function Select to display the audio source selection screen. Select to display the sound setting screen. Select to display full screen video. Select to change the screen size. (P.76) Press to turn mute on/off.  Turn to adjust volume.  Press to turn the audio system on/off.  Press and hold to restart the audio system. 116 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 117

    4. AUDIO REMOTE CONTROLS 1. STEERING SWITCHES Some parts of the audio/visual system can be adjusted using the switches on the steering wheel. 3 AUDIO/VISUAL SYSTEM No. Switch Volume control switch “MODE” switch “ ” switch Back switch* Volume control switch Mode Operation Function Press Volume up/down Press and hold Volume up/down continuously All *: If equipped 117 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 118

    4. AUDIO REMOTE CONTROLS “ ” switch Mode Operation Function Press Preset station/channel up/down Station/channel list up/down Press and hold Fast preset station/channel up/down Fast station/channel list up/down Press Preset channel up/down Channel list up/down Press and hold Fast preset channel up/down Fast channel list up/down Press Track/file up/down Track/file list up/down Press and hold Fast track/file up/down Fast track/file list up/down AM/FM Radio XM Audio CD, MP3/ WMA/AAC disc, USB, iPod, BT audio Back switch Mode All Operation Press Function Return to the previous screen 118 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 119

    4. AUDIO REMOTE CONTROLS “MODE” switch Mode Operation Function AM, FM, XM, AUX Press Change audio modes Press and hold Mute (Press and hold again to resume the sound.) Audio CD/ MP3/WMA/ AAC disc, USB, iPod, BT audio, APPS Press Change audio modes Press and hold Pause (Press and hold again to resume the playmode.) 3 119 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 AUDIO/VISUAL SYSTEM INFORMATION ● In the APPS mode, some operation may be done on the screen depend on the selected APPS. ...
  • Page 120

    5. SETUP 1. AUDIO SETTINGS Detailed audio settings can be programmed. 1 Press the “APPS” button. 2 3 4 Select “Setup”. AUDIO SETTINGS SCREEN Select “Audio”. Select the items to be set. 120 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 121

    5. SETUP No. Page Select to change the number of preset radio stations/channels displayed on the screen. 121 1 Display the “Audio Settings” screen. (P.120) Select to set the iPod audio signal input settings. 2 3 Select “Number of Radio Presets”. 121 Select to set the video signal format settings. 121 Select to set cover art settings on/off.  Select to set automatic sound levelizer. 74 Select to create a feeling of presence. 74 Select to enable cache radio.  Select to reset all setup items.  *: If equipped Select the button with the desired number to be displayed. iPod SETTINGS 1 Display the “Audio Settings” screen. (P.120) 2 Select “iPod Video Sound Input” (“iPod Sound Input”). 3 Select a screen button for the desired setting. EXTERNAL VIDEO SETTINGS 1 Display the “Audio Settings” screen. (P.120) 2 3 Select “Video Input Mode”. Select a screen button for the desi ...
  • Page 122

    6. TIPS FOR OPERATING THE AUDIO SYSTEM 1. OPERATING INFORMATION NOTICE ● To avoid damage to the audio system: • Be careful not to spill beverages over the audio system. • Do not put anything other than an appropriate disc into the disc slot. INFORMATION ● The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO Usually, a problem with radio reception does not mean there is a problem with the radio — it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or phone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves. FM Fading and drifting stations ...
  • Page 123

    6. TIPS FOR OPERATING THE AUDIO SYSTEM AM XM  Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM Satellite Radio.  Alternation or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.  This CD player is intended for use with 4.7 in. (12 cm). discs only.  Extremely high temperatures can keep the CD player from working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player.  Bumpy roads or other vibrations may make the CD player skip.  If moisture gets into the CD player, the discs may not be able to be played. Remove the discs from the player and wait until it dries. WARNING ● CD players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player correctly. Audio CDs  Use only discs marked as shown ...
  • Page 124

    6. TIPS FOR OPERATING THE AUDIO SYSTEM Special shaped discs Transparent/translucent discs NOTICE ● Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. ● This system is not designed for use of Dual Discs. Do not use Dual Discs because they may cause damage to the player. ● Do not use discs with a protection ring. The use of such discs may damage the player, or it may be impossible to eject the disc. ● Do not use printable discs. The use of such discs may damage the player, or it may be impossible to eject the disc. Low quality discs Correct Labeled discs Wrong  Handle discs carefully, especially when inserting them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side.  Dirt, scratches, warping, pin holes or other disc da ...
  • Page 125

    6. TIPS FOR OPERATING THE AUDIO SYSTEM  Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight. iPod To clean a disc: Wipe it with a soft, lintfree cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint-free cloth. Do not use a conventional record cleaner or anti-static device. CD-R/RW DISCS  CD-R/CD-RW discs that have not been subject to the “finalizing process” (a process that allows discs to be played on a conventional CD player) cannot be played.  It may not be possible to play CD-R/CDRW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit.  It may not be possible to play discs recorded on a personal computer depending on the application settings and the environ ...
  • Page 126

    6. TIPS FOR OPERATING THE AUDIO SYSTEM COMPATIBLE MODELS The following iPod®, iPod nano®, iPod classic®, iPod touch® and iPhone® devices can be used with this system. Made for • • • • • • • • • • • • • • • • • • • • iPod touch (5th generation)* iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod touch (1st generation) iPod classic iPod with video iPod nano (7th generation)* iPod nano (6th generation)* iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation)* iPod nano (1st generation)* iPhone 5* iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone FILE INFORMATION ■COMPATIBLE USB DEVICES USB communication formats USB 2.0 HS (480 Mbps) and FS (12 Mbps) File formats FAT 16/32 Correspondence class Mass class ■COMPATIBLE storage COMPRESSED FILES Item Compatible file format USB/iPod DISC MP3/WMA/AAC Folders in th ...
  • Page 127

    6. TIPS FOR OPERATING THE AUDIO SYSTEM ■CORRESPONDING SAMPLING FREQUENCY File type Frequency (kHz) 32/44.1/48 MP3 files: MPEG 2 LSF LAYER 3 16/22.05/24 WMA files: Ver. 7, 8, 9 (9.1/9.2) 32/44.1/48 AAC files: MPEG4/AAC-LC 11.025/12/16/ 22.05/24/32/ 44.1/48 ■CORRESPONDING BIT RATES File type Bit rate (kbps) MP3 files: MPEG 1 LAYER 3 32 - 320 MP3 files: MPEG 2 LSF LAYER 3 8 - 160 WMA files: Ver. 7, 8 CBR 48 - 192 WMA files: Ver. 9 (9.1/9.2) CBR 48 - 320 AAC files: MPEG4/AAC-LC 16 - 320 (Variable Bit Rate (VBR) compatible) 127 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 3 AUDIO/VISUAL SYSTEM MP3 files: MPEG 1 LAYER 3  MP3 (MPEG Audio Layer 3), WMA (Windows Media Audio) and AAC (Advanced Audio Coding) are audio compression standards.  This system can play MP3/WMA/AAC files on CD-R, CD-RW discs and USB memory.  This system can play disc recordings compatible with ISO 9660 level 1 and le ...
  • Page 128

    6. TIPS FOR OPERATING THE AUDIO SYSTEM  The MP3/WMA player does not play back MP3/WMA files from discs recorded using packet write data transfer (UDF format). Discs should be recorded using “pre-mastering” software rather than packet-write software.  M3u playlists are not compatible with the audio player.  MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player.  The player is compatible with VBR (Variable Bit Rate).  When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or reverse operations are used.  It is not possible to check folders that do not include MP3/WMA/AAC files.  MP3/WMA/AAC files in folders up to 8 levels deep can be played. However, the start of playback may be delayed when using discs containing numerous levels of folders. For this reason, we recommend creating discs with no more than 2 levels of folders. 001.mp3 002.wma Folder 1 ...
  • Page 129

    6. TIPS FOR OPERATING THE AUDIO SYSTEM TERMS PACKET WRITE  This is a general term that describes the process of writing data on-demand to CDR, etc., in the same way that data is written to floppy or hard discs.  This is a method of embedding trackrelated information in an MP3 file. This embedded information can include the track number, track title, the artist’s name, the album title, the music genre, the year of production, comments, cover art and other data. The contents can be freely edited using software with ID3 tag editing functions. Although the tags are restricted to a number of characters, the information can be viewed when the track is played back.  This is the international standard for the formatting of CD-ROM folders and files. For the ISO 9660 format, there are 2 levels of regulations.  Level 1: The file name is in 8.3 format (8 character file names, with a 3 character file extension. File names must be composed of one-byte capital letters a ...
  • Page 130

    6. TIPS FOR OPERATING THE AUDIO SYSTEM ERROR MESSAGES Mode CD USB iPod Message Explanation “No music files found.” This indicates that no MP3/WMA/AAC files are included in the disc. “Check disc” It indicates that the disc is dirty, damaged, or it was inserted upside down. Clean the disc or insert it correctly. It indicates a disc which is not playable is inserted. “DISC Error” There is a trouble inside the system. Eject the disc. “Connection error. Please consult your Owner’s Manual for instructions on how to connect the USB device.” This indicates a problem in the USB memory or its connection. “There are no files available for playback. Please add compatible files to your USB device.” This indicates that no MP3/WMA/AAC files are included in the USB memory. “Connection error. Please consult your Owner’s Manual for instructions on how to connect the iPod.” This indicates a problem in the iPod or its connection. “Th ...
  • Page 131

    6. TIPS FOR OPERATING THE AUDIO SYSTEM INFORMATION ● If the malfunction is not rectified: Take your vehicle to your Toyota dealer. 3 AUDIO/VISUAL SYSTEM 131 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 132

    6. TIPS FOR OPERATING THE AUDIO SYSTEM 132 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 133

    4 1 VOICE COMMAND SYSTEM 2 VOICE COMMAND SYSTEM OPERATION 3 1. VOICE COMMAND SYSTEM...... 134 4 1 USING THE VOICE COMMAND SYSTEM............................................ 134 VOICE COMMAND SYSTEM OPERATION ..................................... 135 2. CASUAL SPEECH RECOGNIZATION..................... 140 3. COMMAND LIST ......................... 141 5 6 7 8 133 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 134

    1. VOICE COMMAND SYSTEM OPERATION 1. VOICE COMMAND SYSTEM The voice command system enables the audio, hands-free systems, etc. to be operated using voice commands. MICROPHONE Type A Refer to the command list for samples of voice commands. (P.141) USING THE VOICE COMMAND SYSTEM STEERING SWITCH Type B Talk switch  Press the talk switch to start the voice command system.  To cancel voice recognition, press and hold the talk switch.  It is unnecessary to speak directly into the microphone when giving a command. 134 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 135

    1. VOICE COMMAND SYSTEM OPERATION INFORMATION The voice command system is operated by selecting a tab corresponding to each function. The tabs are found on the upper part of the screen. 1 Press the talk switch.  Voice guidance for the voice command system can be skipped by pressing the talk switch. 2 Say the tab selection command or select the desired tab.  Commands related with each function are displayed on the screen of the each function tab. Some commonly used commands are displayed on the screen of the function tab.  Selecting “Help” or saying “Help” prompts voice guidance to offer examples of commands and operation methods. 135 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 4 VOICE COMMAND SYSTEM ● The voice command system can be operated while guidance is being spoken, when “Voice Prompt Interrupt” (P.63) is set to on. (It is not necessary to wait for the confirmation beep before speaking a command.) ● Voice commands may not be ...
  • Page 136

    1. VOICE COMMAND SYSTEM OPERATION 3 Say the command displayed on the screen.  Registered POIs, registered names in the contacts list etc., can be said in the place of the “<>” next to the commands. (P.141) For example: Say “Find nearby dining”, “Call John smith” etc.  If a desired outcome is not shown, or if no selections are available, perform one of the following to return to the previous screen: • Say “Go back”. • Select “Go Back”.  To cancel voice recognition, select “Cancel”, or press and hold the talk switch. INFORMATION ● If the system does not respond or the confirmation screen does not disappear, press the talk switch and try again. ● “Voice Recognition Prompts” can be set on the “Voice Settings” screen. (P.63) ● Some voice guidance can be canceled by setting voice prompts to off. Use this setting when it is desirable to say a command immediately after pressing the talk switch and hearing a beep. ■DISPLAYING THE “Voice Settings” SCREE ...
  • Page 137

    1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: PERFORMING A DESTINATION SEARCH BY ADDRESS (ENGLISH ONLY) 1 2 3 ● The voice command recognition is designed to recognize the main body of the official street name. Say “Enter an address”. For example: if the official street name is “East Main Street”, the voice command recognition will recognize “Main”. Say “<house number, street name, city name, State>” continuously. For example: Say “West 555”. Press the talk switch.  For information regarding the state/ province setting to perform a destination search by address: P.210 Say “Go directly”.  After this, follow the voice guidance and search for a destination route by voice command operation. ● Say the desired number, cardinal direction etc. in the place of the “<>”. ● Inputting the house number can be skipped. ● Even if the state set using voice recognition is different from the set state in the “Address” screen (which was s ...
  • Page 138

    1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: SEARCH FOR A SONG* 1 2 Press the talk switch. Say “Play song <name>”.  A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say “<number>” or select the number.  The system starts playing music and the song lists are displayed. VOICE COMMAND EXAMPLE: CALL NAME 1 2 Press the talk switch. Say “Call types>”. <contacts> <phone  A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say “<number>” or select the number. INFORMATION ● The Gracenote database is only compatible with the USB or iPod mode. ● A USB memory or iPod must be connected to enable track searching and playback. (P.99, 103) ● When a USB memory or iPod is connected, recognition data is created so tracks can be searched usin ...
  • Page 139

    1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: DIAL NUMBER INFORMATION 1 2 Press the talk switch. Say the phone number.  In the same manner as it is displayed on the screen, “Dial <number>”, after saying “Dial a number” say the phone number.  Say the phone number one digit at a time. For example, if the phone number is 2345678: Say “two three four five six seven eight” Do not say “twenty three forty five sixty seven eight” Calling to the following phone numbers • 3 digit numbers (911, 411, 611) • 7 digit numbers (Local phone numbers) • 10 digit numbers (Area code + Local phone number) • 11 digit phone numbers (1 + Area code + Local phone number)  As the system cannot recognize additional numbers, say the complete number without stopping. Calling to other phone numbers 3 Say “Call” or press the the steering wheel. switch on  When the system recognizes multiple phone numbers, a phone number candidate list will be disp ...
  • Page 140

    1. VOICE COMMAND SYSTEM OPERATION 2. CASUAL SPEECH RECOGNIZATION Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the procedure and directly state the desired operation. Not all voice commands are displayed in the function menu. INFORMATION ● If the command cannot be recognized completely, the command input screen will be displayed. (Search results will be shown based on the part of the command that was recognized.) EXPRESSION EXAMPLES FOR EACH FUNCTION Command Expression examples “Go Home” Navigate to my house. Take me home. “Enter an Address” I need directions to an address. Give me a street. “Find Nearby <POI category>” Search for a <Restaurants> around here. Find a <Restaurants> nearby. “Call <name> <type>” Get me <Robert ...
  • Page 141

    1. VOICE COMMAND SYSTEM OPERATION 3. COMMAND LIST Recognizable voice commands and their actions are shown below.  Frequently used commands are listed in the following tables.  For devices that are not installed in the vehicle, the related commands will not be displayed in the screen. Also, according to conditions, other commands may not be displayed in the screen.  The functions available may vary according to the system installed.  Voice recognition language can be changed. (P.57) Basic 4 Action “Help with <function name*>” Prompts voice guidance to offer examples of commands or operation methods “Go Back” Returns to the previous screen “Number one/two/three/four/five” Selects the number on the list screen “Next Page” Displays the next page “Previous Page” Displays the previous page “Go to <tab>” Displays the command list of the selected tab *: For example; “Music”, “Phone”, etc. Apps When the voice recognition langua ...
  • Page 142

    1. VOICE COMMAND SYSTEM OPERATION Phone Command Action “Redial” Places a call to the phone number of the latest outgoing call “Call Back” Places a call to the phone number of latest incoming call “Show Recent Calls” Displays the call history screen “Dial <phone number>” Places a call to the said phone number “Call <contacts> <phonetypes>” Place a call to the said phone type of the contact from the phone book Audio* Command Action “Play Playlist <name>” Plays tracks from the selected playlist “Play Artist <name>” Plays tracks from the selected artist “Play Song <name>” Plays the selected track “Play Album <name>” Plays tracks from the selected album *: Only for external music device Information Command Action “Show Forecast” Displays weather information “Show Traffic” Displays traffic information INFORMATION ● Commands relating to operation of the audio can only be performed when the aud ...
  • Page 143

    5 1 INFORMATION 2 1 USEFUL INFORMATION 3 1. RECEIVING WEATHER INFORMATION ......................... 144 4 DISPLAYING WEATHER INFORMATION ................................. 144 5 2. DATA SERVICES SETTINGS..... 146 SETTING DOWNLOAD METHODS .... 146 6 7 8 143 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 144

    1. USEFUL INFORMATION 1. RECEIVING WEATHER INFORMATION Weather information can be received via the HD Radio or by the Entune App Suite application on a Bluetooth® phone. For details about the Entune App Suite application: P.265 3 Check that the “Weather” screen is displayed. DISPLAYING WEATHER INFORMATION 1 Press the “APPS” button. No. Function Select to display the weather of the current location. (P.145) Select to display the weather of a desired location in the recently checked locations list. Select to display the weather of a desired location in the national cities list. 2 Select “Weather”. Select to display the weather of a desired location in the other local cities list. Select to display weather information over the map. INFORMATION ● Weather information is available in the 48 states, D.C. and Alaska of the United States. ● The weather for current location might not show the closest city when it first displays. 144 ...
  • Page 145

    1. USEFUL INFORMATION DISPLAYING THE WEATHER OF THE CURRENT LOCATION 1 Display the (P.144) 2 3 Select “Current Weather”. “Weather” screen. Select the desired tab to be displayed. INFORMATION ● If weather is set to the home screen, the weather screen of the current location will be displayed. 5 INFORMATION 145 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 146

    1. USEFUL INFORMATION 2. DATA SERVICES SETTINGS SETTING DOWNLOAD METHODS Data service information, which is comprised of traffic information and weather information, can be received via the HD Radio and by the Entune App Suite application on a Bluetooth® phone. The receiving method can be set to both or only via the HD Radio. For details about the Entune App Suite application: P.265 1 Press the “APPS” button. 4 Select the desired item to be set.  Select a checkbox on the right to set. No. Function Select to receive data service information via both the HD Radio and the Entune App Suite application on a Bluetooth® phone. When both methods are available, the HD Radio will be selected. Select to receive data only via the HD Radio. INFORMATION 2 3 Select “Setup”. ● These settings are available in the 48 states, D.C. and Alaska of the United States. Select “HD Data”. 146 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 147

    6 1 PHONE 2 1 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 6. Bluetooth® PHONE MESSAGE FUNCTION ................................ 163 3 RECEIVING A MESSAGE ................... 164 CHECKING MESSAGES..................... 164 1. QUICK REFERENCE................... 148 REPLYING TO A MESSAGE (QUICK REPLY) ................................ 165 2. SOME BASICS ............................ 149 CALLING THE MESSAGE SENDER... 166 4 5 REGISTERING/CONNECTING A Bluetooth® PHONE ........................... 149 USING THE PHONE SWITCH/ MICROPHONE ................................. 150 VOICE COMMAND SYSTEM.............. 151 ABOUT THE CONTACTS IN THE CONTACT LIST ................................ 152 2 SETUP 6 1. PHONE/MESSAGE SETTINGS................................. 168 WHEN SELLING OR DISPOSING OF THE VEHICLE............................. 152 “Sound Settings” SCREEN .................. 169 “Contact/Call History Settings” SCRE ...
  • Page 148

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 1. QUICK REFERENCE The phone top screen can be used to make a phone call. To display the hands-free operation screen, press the “APPS” button and select “Phone”, the switch on the steering wheel or switch on the instrument panel. Several functions are available to operate on each screen that is displayed by selecting the 4 tabs. Function Page Registering/connecting Bluetooth® phone Calling on the Bluetooth® Phone operation Receiving on the Message function Setting up a phone 44 phone Bluetooth® 153 phone 159 Talking on the Bluetooth® phone 160 Using the Bluetooth® phone message function 163 Phone settings 168 ® Bluetooth settings 49 148 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 149

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 2. SOME BASICS The hands-free system enables calls to be made and received without having to take your hands off the steering wheel. This system supports Bluetooth®. Bluetooth® is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle. The operating procedure of the phone is explained here. WARNING ● While driving, do not use a cellular phone or connect the Bluetooth® phone. Bluetooth® ● Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. ● If your cellular phone does not support Blue ...
  • Page 150

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) USING THE PHONE SWITCH/ MICROPHONE Steering switch Microphone The microphone is used when talking on the phone. Type A By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. Type B Volume control switches  Press the “+” side to increase the volume.  Press the “-” side to decrease the volume. On hook switch Off hook switch 150 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 151

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) VOICE COMMAND SYSTEM Press this switch to operate the voice command system. ● The other party’s voice will be heard from the front speakers. The audio/ visual system will be muted during phone calls or when hands-free voice commands are used. ● Talk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.) ● Keep call volume down. Otherwise, the other party’s voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone. ● The other party may not hear you clearly when: • Driving on an unpaved road. (Making excessive traffic noise.) • Driving at high speeds. • The roof or windows are open. • The air conditioning vents are pointed towards the microphone. • The sound of the air conditioning fan is loud. • There is a negative ...
  • Page 152

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ABOUT THE CONTACTS IN THE CONTACT LIST  The following data is stored for every registered phone. When another phone is connected, the following registered data cannot be read: • Contact data • Call history data • Favorites data • Image data • All phone settings • Message settings INFORMATION ● When a phone’s registration is deleted, the above-mentioned data is also deleted. WHEN SELLING OR DISPOSING OF THE VEHICLE A lot of personal data is registered when the hands-free system is used. When selling or disposing of the vehicle, initialize the data. (P.62)  The following data in the system can be initialized: • Contact data • Call history data • Favorites data • Image data • All phone settings • Message settings INFORMATION ● Once initialized, the data and settings will be erased. Pay much attention when initializing the data. 152 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 153

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 3. CALLING ON THE Bluetooth® PHONE After a Bluetooth® phone has been registered, a call can be made using the hands-free system. There are several methods by which a call can be made, as described below. 1 Select “Phone”. Page By favorites list 154 By call history 154 By contacts list* 155 By dial pad* 157 By e-mail/SMS/MMS 166 By POI call* 202 By off hook switch 157 By Entune App Suite* 272 By voice command system 138 By “Home” screen 158 *: The operation cannot be performed while driving. Select the desired tab to call from.  The phone top screen can be displayed by pressing the wheel or panel. switch on the steering switch on the instrument 153 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 6 PHONE 2 3 Press the “APPS” button. How to make a call list ...
  • Page 154

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY FAVORITES LIST BY CALL HISTORY Calls can be made using registered contacts which can be selected from a contact list. (P.176) Up to 30 of the latest call history items (missed, incoming and outgoing) can be selected from the “Call History” tab. 1 Display the (P.153) screen. 1 Display the (P.153) 2 Select the “Favorites” tab and select the desired contact. 2 Select the “Call History” tab and se- Select the desired number.  The icons of call type are displayed. 3 4 phone top lect Check that the “Call” screen is displayed. phone top screen. or the desired contact. : Missed call : Incoming call : Outgoing call When 3 is selected Check that the “Call” screen is displayed. When the desired contact is selected 3 4 Select the desired number. Check that the “Call” screen is displayed. 154 PRIUS v_Navi_OM47895U_(U) 14 ...
  • Page 155

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INFORMATION Calls can be made by using contact data which is transferred from a registered cellular phone. (P.156) Up to 2500 contacts (maximum of 4 phone numbers and e-mail addresses per contact) can be registered in the contact list. 1 Display the (P.153) 2 Select the “Contacts” tab and select the desired contact. phone top screen. 6 PHONE ● When making a call to the same number continuously, only the most recent call is listed in call history. ● When a phone number registered in the contact list is received, the name is displayed. ● Number-withheld calls are also memorized in the system. ● International phone calls may not be made depending on the type of cellular phone you have. ● The list should group together consecutive entries with the same phone number and same call type. For example, two calls from Kay Rowles’s mobile would be displayed as follows: Kay Rowles (2) ...
  • Page 156

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) WHEN THE CONTACT IS EMPTY ■FOR PBAP COMPATIBLE ® Bluetooth PHONES ■FOR PBAP INCOMPATIBLE BUT Bluetooth® OPP COMPATIBLE PHONES 1 Select the desired item. When “Automatic Transfer” is set to on (P.170)  Contacts are transferred automatically. When “Automatic Transfer” is set to off (P.170) 1 Select the desired item. No. Function Select to transfer the contacts from the connected cellular phone. Select to add a new contact manually. Select to cancel transferring. No. Function Select to transfer new contacts from a cellular phone, select “Always” and then enable “Automatic Transfer”. Select to transfer all the contacts from a connected cellular phone only once. Select to cancel transferring. When “Transfer” is selected 2 Follow the steps in “FOR PBAP INCOMPATIBLE BUT OPP COMPATIBLE Bluetooth® PHONES” from “STEP 2”. (P.172) When “Add” is select ...
  • Page 157

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY OFF HOOK SWITCH INFORMATION ● Manual transfer operation cannot be performed while driving. ● If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred. ● Depending on the type of Bluetooth® phone: • It may be necessary to perform additional steps on the phone when transferring contact data. • The registered image in the contact list may not transfer depending on the type of Bluetooth® phone connected. BY DIAL PAD 1 Display the (P.153) 2 Select the “Dial Pad” tab and enter the phone number. 3 Select or press the the steering wheel. 4 Check that the “Call” screen is displayed. phone top Calls can be made using the latest call history item. 1 Press the switch on the steering wheel to display the phone top screen. 2 Press the switch on the steering wheel to display the “Call History” screen. 3 Press the switch ...
  • Page 158

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY “Home” SCREEN 1 2 Display the home screen. (P.37) 3 Check that the “Call” screen is displayed. Select the desired contact. REGISTERING A NEW CONTACT 1 Select and hold the screen button to add a contact. 2 3 Select the desired contact. Select the desired number. INFORMATION ● If there is no contact in the contacts list, the contacts cannot be registered at the home screen. ● The contact cannot be registered at the home screen while driving. 158 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 159

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 4. RECEIVING ON THE Bluetooth® PHONE INCOMING CALLS When a call is received, this screen is displayed with a sound. 1 Select or press the switch on the steering wheel to talk on the phone. 6 To refuse to receive the call: Select PHONE or press the switch on the steering wheel. To adjust the volume of a received call: Turn the “PWR VOL” knob, or use the volume control switch on the steering wheel. INFORMATION ● During international phone calls, the other party’s name or number may not be displayed correctly depending on the type of cellular phone you have. ● The incoming call display mode can be set. (P.180) ● The ringtone that has been set in the “Sound Settings” screen sounds when there is an incoming call. Depending on the type of Bluetooth® phone, both the system and Bluetooth® phone may sound simultaneously when there is an incoming call. (P.169) 159 PRIUS v_Navi_OM47895 ...
  • Page 160

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 5. TALKING ON THE Bluetooth® PHONE While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen. No. Function Page Select to display the dial pad to send tones. 160 Select to mute your voice to the other party.  Select to change handset modes between handsfree and cellular phone.  Select to adjust your voice volume that the other party hears from their speaker. 161 Select to send tones. This button only appears when a number that contains a (w) is dialed in hands-free mode. 161 Select to hang up the phone.  Select “+” or “-” to adjust the volume of the other party’s voice.  Select to start talking with the other party. 162 INFORMATION ● Changing from hands-free call to cellular phone call is not possible while driving. ● When cellular phone call is changed to hands-free call, the hands- ...
  • Page 161

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■BY SELECTING “Release Tones” “Release Tones” appear when a continuous tone signal(s) containing a (w) is registered in the contact list. TRANSMIT VOLUME SETTING 1 2 Select “Transmit Volume”. 3 Select “OK”. This operation can be performed while driving. 1 Select the desired level for the transmit volume. Select “Release Tones”. INFORMATION 6 INFORMATION ● The sound quality of the voice heard from the other party’s speaker may be negatively impacted. ● To reset the transmit volume, select “Default”. ● “Transmit Volume” is dimmed when mute is on. 161 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 PHONE ● A continuous tone signal is a character string that consists of numbers and the characters p or w. (e.g. 056133w0123p#1) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. Whe ...
  • Page 162

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INCOMING CALL WAITING When a call is interrupted by a third party while talking, this screen is displayed. 1 Select or press the switch on the steering wheel to start talking with the other party. To refuse to receive the call: Select or press the ing wheel. switch on the steer-  Each time is selected or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched. INFORMATION ● This function may not be available depending on the type of cellular phone. 162 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 163

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 6. Bluetooth® PHONE MESSAGE FUNCTION Received messages can be forwarded from the connected Bluetooth® phone, enabling checking and replying using the system. Depending on the type of Bluetooth® phone connected, received messages may not be transferred to the message inbox. 3 Select .  The phone top screen can be displayed by switch on the steering pressing the wheel or panel. 4 switch on the instrument Check that the message inbox screen is displayed. If the phone does not support the message function, this function cannot be used. 1 Press the “APPS” button. 6 : Select to change to phone mode. 2 Select “Phone”. Page Receiving a message 164 Checking messages 164 Replying to a message (quick reply) 165 Calling the message sender 166 Message settings 178  You can also display the message inbox screen to select “Messages”. (STEP4) ...
  • Page 164

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) RECEIVING A MESSAGE When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen. No. CHECKING MESSAGES 1 Display the message inbox screen. (P.163) 2 Select the desired message from the list. 3 Check that the message is displayed. Function Select to check the message. No. Select to not open the message. Select to call the message sender. INFORMATION ● Depending on the cellular phone used for receiving messages, or its registration status with the system, some information may not be displayed. ● The pop up screen is separately available for incoming e-mail and SMS/MMS messages under the following conditions: E-mail: • “Incoming E-mail Display” is set to “Full Screen”. (P.178) • “E-mail Notification Popup” is set to on. (P.178) SMS/MMS: • “Incoming SMS/MMS Display” is set to “Full Screen”. (P.178) • “SM ...
  • Page 165

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) No. Function Select to make a call to the sender. *: E-mail only INFORMATION ● Reading a text message is not available while driving. 15 messages have already been stored. 1 Display the message inbox screen. (P.163) 2 Select the desired message from the list. 3 Select “Quick Message”. 6 PHONE ● Depending on the type of Bluetooth® phone being connected, it may be necessary to perform additional steps on the phone. ● Messages are displayed in the appropriate connected Bluetooth® phone’s registered mail address folder. Select the tab of the desired folder to be displayed. ● Only received messages on the connected Bluetooth® phone can be displayed. ● The text of the message is not displayed while driving. ● Turn the “PWR VOL” knob, or use the volume control switch on the steering wheel to adjust the message read out volume. REPLYING TO A MESSAGE (QUICK REPLY) ...
  • Page 166

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■EDITING QUICK REPLY MESSAGES This operation cannot be performed while driving. 1 Select “Quick Message”. CALLING THE MESSAGE SENDER Calls can be made to an e-mail/SMS/ MMS message sender’s phone number. This operation can be performed while driving. ■CALLING FROM E-MAIL/SMS/MMS MESSAGE DISPLAY 2 Select corresponding to the desired message to edit. 3 Select “OK” when editing is completed. 1 Display the message inbox screen. (P.163) 2 Select the desired message. 3 Select . INFORMATION ● To reset the editquick reply messages, select “Default”. ● “Quick Message 1” (“I am driving and will arrive in approximately [ETA] minutes.”): This message cannot be edited and will automatically fill in [ETA] with the navigation calculated estimated time of arrival on the confirm message screen. If there are waypoints set, [ETA] to the next waypoint will be shown. If the ...
  • Page 167

    1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■CALLING FROM A NUMBER WITHIN A MESSAGE Calls can be made to a number identified in a message’s text area. ■CALLING FROM THE INCOMING MESSAGE SCREEN P.164 This operation cannot be performed while driving. 1 Display the message inbox screen. (P.163) 2 3 Select the desired message. Select the text area. 6 PHONE 4 Select the desired number.  Identified phone numbers contained in the message are displayed. 5 Check that the “Call” screen is displayed. INFORMATION ● A series of numbers may be recognized as a phone number. Additionally, some phone numbers may not be recognized, such as those for other countries. 167 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 168

    2. SETUP 1. PHONE/MESSAGE SETTINGS 1 Press the “APPS” button. 2 Select “Setup”. 3 4 Select “Phone”. DISPLAYING THE PHONE/ MESSAGE SETTINGS SCREEN IN A DIFFERENT WAY 1 Display the (P.153) 2 Select “Settings”. phone top screen. Select the item to be set. PHONE/MESSAGE SETTINGS SCREEN No. Information Registering/connecting phone Page a Sound settings Contact/call tings history 49 169 set- 170 Messaging settings 178 Phone display settings 180 168 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 169

    2. SETUP “Sound Settings” SCREEN The call and ringtone volume can be adjusted. A ringtone can be selected. 1 2 3 Display the “Phone/Message Settings” screen. (P.168) Select “Sound Settings”. Select the desired item to be set. No. Function Select to set the desired ringtone. Select “-” or “+” to adjust the ringtone volume. Select “-” or “+” to adjust the message readout volume. Select to set the desired incoming SMS/MMS tone. Select “-” or “+” to adjust the incoming SMS/MMS tone volume. Select to set the desired incoming email tone. Select “-” or “+” to adjust the incoming e-mail tone volume. 6 Select “-” or “+” to adjust the default volume of the other party’s voice. PHONE Select to reset all setup items. INFORMATION ● Depending on the type of phone, certain functions may not be available. 169 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 170

    2. SETUP “Contact/Call History Settings” SCREEN No. Function Page For PBAP compatible Bluetooth® phones, select to set automatic contact/ history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred.  Select to update contacts from the connected phone. 171 Select to sort contacts by the first name or last name field.  Select to add contacts to the favorites list. 176 Select to delete contacts from the favorites list. 177 Select to set the transferred contact image display on/off.  * Select to clear contacts from the call history.  * Select to add new contacts to the contact list. 173 * Select to edit contacts in the contact list. 174 The contact can be transferred from a Bluetooth® phone to the system. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed. 1 Displ ...
  • Page 171

    2. SETUP No. * Function Page Select to delete contacts from the contact list. 175 Select to reset all setup items.  *: For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.170) INFORMATION Operation methods differ between PBAP compatible and PBAP incompatible but OPP compatible Bluetooth® phones. If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred. ■FOR PBAP COMPATIBLE ® Bluetooth PHONES 1 Select “Update Phone”. Contacts from 6  Contacts are transferred automatically. 2 Check that a confirmation screen is displayed when the operation is complete.  This operation may be unnecessary depending on the type of cellular phone.  Depending on the type of cellular phone, OBEX authentication may be required when transferring contact data. Enter “1234” into the Bluetooth® phone.  If another Bluetooth® device ...
  • Page 172

    2. SETUP ■FOR PBAP INCOMPATIBLE BUT ■UPDATING THE CONTACTS IN A ® DIFFERENT WAY (FROM THE “Call History” SCREEN) OPP COMPATIBLE PHONES Bluetooth This operation cannot be performed while driving. 1 Select “Update Phone”. 2 Transfer the contact data to the system Contacts from using a Bluetooth® phone.  This operation may be unnecessary depending on the type of cellular phone.  Depending on the type of cellular phone, OBEX authentication may be required when transferring contact data. Enter “1234” into the Bluetooth® phone.  To cancel this function, select “Cancel”. 3 Check that a confirmation screen is displayed when the operation is complete. For only OPP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.170) 1 Display the (P.153) 2 Select the “Call History” tab and select a contact not yet registered in the contact list. 3 4 5 Select “Update C ...
  • Page 173

    2. SETUP REGISTERING A NEW CONTACT TO THE CONTACT LIST New contact data can be registered. Up to 4 numbers per person can be registered. For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.170) 1 2 3 Select “New Contact”. ■REGISTERING A NEW CONTACT IN A DIFFERENT WAY (FROM THE “Call History” SCREEN) For only OPP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.170) 1 Display the (P.153) 2 Select the “Call History” tab and select a contact not yet registered in the contact list. 3 4 Select “Add to Contacts”. Enter the name and select “OK”. Enter the phone number and select “OK”. Select the phone type for the phone number. 5 To add another number to this contact, select “Yes”. top screen. 6 Follow the steps in “REGISTERING A NEW CONTACT TO THE CONTACT LIST” from “STEP 2”. (P.173) 173 PRIUS v_Na ...
  • Page 174

    2. SETUP ■EDITING THE CONTACT IN A DIF- EDITING THE CONTACT DATA FERENT WAY (FROM THE “Contact Details” SCREEN) ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (P.170) 1 2 Select “Edit Contacts”. 3 Select corresponding to the desired name or number. 1 Display the (P.153) 2 Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact. 3 Select “Edit Contact”. Select the desired contact. phone top screen. For editing the name “E-mail Addresses”: Select to display all registered e-mail addresses for the contact. 4 4 Follow the steps in “REGISTERING A NEW CONTACT TO THE CONTACT LIST” from “STEP 2”. (P.173) Follow the steps in “EDITING THE CONTACT DATA” from “STEP 4”. (P.174) For editing the number 4 Follow the steps in “REGISTERING A NEW CONTACT TO THE CONTACT LIST” from “STEP 3”. (P.173) ...
  • Page 175

    2. SETUP DELETING THE CONTACT DATA For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.170) 1 2 Select “Delete Contacts”. 3 Select “Yes” when the confirmation screen appears. Select the desired contact and select “Delete”. ■DELETING THE CONTACT IN A DIFFERENT WAY (FROM THE “Contact Details” SCREEN) 1 Display the (P.153) 2 Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact. 3 4 Select “Delete Contact”. phone top screen. Select “Yes” when the confirmation screen appears. INFORMATION INFORMATION ● When a Bluetooth® phone is deleted, the contact data will be deleted at the same time. 175 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 6 PHONE ● Multiple data can be selected and deleted at the same time. ...
  • Page 176

    2. SETUP FAVORITES LIST SETTING Up to 15 contacts (maximum of 4 numbers per contact) can be registered in the favorites list. When 15 contacts have already been registered to the favorites list 1 When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact. 2 Select the contact to be replaced. 3 Check that a confirmation screen is displayed when the operation is complete. ■REGISTERING THE CONTACTS IN THE FAVORITES LIST 1 2 Select “Add Favorite”. Select the desired contact to add to the favorites list.  Dimmed contacts are already stored as a favorite. 3 Check that a confirmation screen is displayed when the operation is complete. 176 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 177

    2. SETUP Registering contacts in the favorites list in a different way (from the “Contacts” screen) 1 2 3 Display the (P.153) phone top screen. ■DELETING THE CONTACTS IN THE FAVORITES LIST 1 2 Select “Remove Favorite”. 3 Select “Yes” when the confirmation screen appears. Select the “Contacts” tab. Select the desired contacts and select “Remove”. Select  at the beginning of the desired contact list name to be registered in the favorites list. 4 Registering contacts in the favorites list in a different way (from the “Contact Details” screen) 1 Display the (P.153) 2 Select the “Contacts” tab or the “Call History” tab and select the desired contact. 3 4 Select “Add Favorite”. phone top screen. Check that a confirmation screen is displayed when the operation is complete. 177 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 PHONE  When selected,  is changed to , and the contact is r ...
  • Page 178

    2. SETUP Deleting contacts in the favorites list in a different way (from the “Contacts” screen) 1 Display the (P.153) 2 3 Select the “Contacts” tab. phone top screen. Select  at the beginning of the contact list name to be deleted from the favorites list.  When selected,  is changed to the data is deleted from the list. “Messaging Settings” SCREEN 1 Display the “Phone/Message Settings” screen. (P.168) 2 3 Select “Messaging Settings”. Select the desired item to be set. , and Deleting contacts in the favorites list in a different way (from the “Contact Details” screen) 1 Display the (P.153) phone top screen. No. Function 2 Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact to delete. 3 4 Select “Remove Favorite”. Select “Yes” when the confirmation screen appears. Select to set the SMS/MMS notification popup on/off. 5 Check that ...
  • Page 179

    2. SETUP No. DISPLAYING THE “Messaging Settings” SCREEN IN A DIFFERENT WAY Function Select to set adding the vehicle signature to outgoing messages on/off. Select to set updating message read status on phone on/off. 1 Display the (P.153) Select to change the incoming SMS/ MMS display. “Full Screen”: When an SMS/MMS message is received, the incoming SMS/MMS display screen is displayed and can be operated on the screen. “Drop-down”: When an SMS/MMS message is received, a message is displayed on the upper side of the screen. 2 3 Select phone top screen. . Select “Settings”. 6 PHONE Select to change the incoming e-mail display. “Full Screen”: When an e-mail is received, the incoming e-mail display screen is the displayed and can be operated on the screen. “Drop-down”: When an e-mail is received, a message is displayed on the upper side of the screen. Select to set display of messaging account names on the inbox tab on/of ...
  • Page 180

    2. SETUP “Phone Display Settings” SCREEN 1 Display the “Phone/Message Settings” screen. (P.168) 2 3 Select “Phone Display Settings”. Select the desired item to be set. No. Function Select to change the incoming call display. “Full Screen”: When a call is received, the hands-free screen is displayed and can be operated on the screen. “Drop-down”: A message is displayed on the upper side of the screen. Select to set display of the contact/ history transfer completion message on/off. Select to reset all setup items. INFORMATION ● Depending on the phone, these functions may not be available. 180 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 181

    3. WHAT TO DO IF... 1. TROUBLESHOOTING If there is a problem with the hands-free system or a Bluetooth® device, first check the table below. When using the hands-free system with a Bluetooth® device Page Symptom Likely cause The connected device may not be a compatible The hands-free sys- Bluetooth® cellular phone. tem or Bluetooth® device does not work. For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.com/ entune/ Cellular phone This system   6 Use a cellular phone with Bluetooth® version 2.0 or higher (recommended: Ver. 3.0 +EDR or higher).  PHONE The Bluetooth® version of the connected cellular phone may be older than the specified version. Solution 46 181 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 182

    3. WHAT TO DO IF... When registering/connecting a cellular phone Page Symptom A cellular phone cannot be registered. A Bluetooth® connection cannot be made. Likely cause Solution An incorrect passcode was entered on the cellular phone. Cellular phone This system Enter the correct passcode on the cellular phone.   The registration operation has not been completed on the cellular phone side. Complete the registration operation on the cellular phone (approve registration on the phone).   Old registration information remains on either this system or the cellular phone. Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system.  51 Another Bluetooth® device is already connected. Manually connect the cellular phone you wish to use to this system.  52 Bluetooth® function is not enabled on t ...
  • Page 183

    3. WHAT TO DO IF... Page Symptom “Unable to Please check phone.” dial. your Likely cause Solution Bluetooth® function is not enabled on the cellular phone. Old registration information remains on either this system or the cellular phone. Cellular phone This system Enable the Bluetooth® function on the cellular phone.   Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system.  51 When making/receiving a call 6 Page A call cannot made/received. be Likely cause Solution Your vehicle is in a “No Service” area. Move to where “No Service” no longer appears on the display. Cellular phone This system   183 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 PHONE Symptom ...
  • Page 184

    3. WHAT TO DO IF... When using the phonebook Page Symptom Phonebook data cannot be transferred manually/automatically. Phonebook data cannot be edited. Likely cause Solution Cellular phone This system The profile version of the connected cellular phone may not be compatible with transferring phonebook data. For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.com/ entune/   Automatic contact transfer function on this system is set to off. Set automatic contact transfer function on this system to on.  170 Passcode has not been entered on the cellular phone. Enter the passcode on the cellular phone if requested (default passcode: 1234).   Transfer operation on the cellular phone has not completed. Complete transfer operation on the cellular phone (approve transfer operation on the ph ...
  • Page 185

    3. WHAT TO DO IF... When using the Bluetooth® message function Page Symptom Messages cannot be viewed. Solution Message transfer is not enabled on the cellular phone. Cellular phone This system Enable message transfer on the cellular phone (approve message transfer on the phone).   Automatic transfer function on this system is set to off. Set automatic transfer function on this system to on.  178 Notification of SMS/ MMS/E-mail reception on this system is set to off. Set notification of SMS/ MMS/E-mail reception on this system to on.  178 Automatic message transfer function is not enabled on the cellular phone. Enable automatic transfer function on the cellular phone.   6 PHONE New message notifications are not displayed. Likely cause 185 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 186

    3. WHAT TO DO IF... In other situations Page Symptom Likely cause Solution The Bluetooth® connection status is displayed at the top of the screen each time the power switch is in ACCESSORY or ON mode. Connection confirmation display on this system is set to on. The cellular phone is not close enough to this system. Even though all conceivable measures have been taken, the symptom status does not change. Cellular phone This system To turn off the display, set connection confirmation display on this system to off.  55 Bring the cellular phone closer to this system.   Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular phone.     Stop the cellular phone’s security software and close all applications.   Before using an application installed on the cellular phone, carefully check its source and how its operation might affect this syst ...
  • Page 187

    7 1 NAVIGATION SYSTEM 2 1 BASIC OPERATION 3 1. QUICK REFERENCE .................. 190 MAP SCREEN ..................................... 190 4 NAVIGATION OPTIONS SCREEN...... 192 2. MAP SCREEN OPERATION....... 193 5 CURRENT POSITION DISPLAY ......... 193 MAP SCALE ........................................ 194 ORIENTATION OF THE MAP ............. 195 6 SWITCHING THE MAP MODE............ 196 SCREEN SCROLL OPERATION ........ 198 7 ADJUSTING LOCATION IN SMALL INCREMENTS................................... 199 3. MAP SCREEN INFORMATION... 200 DISPLAYING MAP INFORMATION .... 200 DISPLAYING INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET ...................... 202 STANDARD MAP ICONS .................... 203 4. TRAFFIC INFORMATION ........... 204 DISPLAYING TRAFFIC INFORMATION ON THE MAP .................................... 206 187 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 8 ...
  • Page 188

    2 DESTINATION SEARCH 3 ROUTE GUIDANCE 1. DESTINATION SEARCH SCREEN .................................... 207 1. ROUTE GUIDANCE SCREEN .... 223 2. SEARCH OPERATION ................ 209 ROUTE OVERVIEW ............................ 224 SELECTING SEARCH AREA.............. 210 SCREEN FOR ROUTE GUIDANCE .... 223 DURING FREEWAY DRIVING ............ 225 SETTING HOME AS DESTINATION... 210 WHEN APPROACHING INTERSECTION ................................ 226 SETTING PRESET DESTINATIONS AS DESTINATION ............................ 210 TURN LIST SCREEN........................... 227 SEARCHING BY ADDRESS ............... 211 TURN-BY-TURN ARROW SCREEN ... 227 SEARCHING BY POINT OF INTEREST......................................... 212 2. TYPICAL VOICE GUIDANCE PROMPTS ................................. 228 SEARCHING FROM PREVIOUS DESTINATIONS................................ 215 3. EDITING ROUTE ......................... 229 SEARCHING BY ADDRE ...
  • Page 189

    1 2 4 MEMORY POINTS TIPS FOR THE NAVIGATION SYSTEM 3 1. GPS (GLOBAL POSITIONING SYSTEM)................................... 255 4 6 1. MEMORY POINTS SETTINGS .... 234 SETTING UP HOME ........................... 235 SETTING UP PRESET DESTINATIONS................................ 236 SETTING UP ADDRESS BOOK ......... 238 SETTING UP AREAS TO AVOID........ 241 DELETING PREVIOUS DESTINATIONS................................ 243 LIMITATIONS OF THE NAVIGATION SYSTEM............................................ 255 5 2. MAP DATABASE VERSION AND COVERED AREA...................... 258 6 MAP INFORMATION ........................... 258 ABOUT THE MAP DATA ..................... 259 5 7 SETUP 1. DETAILED NAVIGATION SETTINGS ................................. 244 8 SCREENS FOR NAVIGATION SETTINGS ........................................ 244 2. TRAFFIC SETTINGS ................... 248 SCREEN FOR TRAFFIC SETTINGS ...................... ...
  • Page 190

    1. BASIC OPERATION 1. QUICK REFERENCE MAP SCREEN To display this screen, press the “APPS” button, then select “Navigation” on the “Apps” screen. No. Name Function Page 2D North-up, 2D heading-up or 3D heading-up symbol Indicates whether the map orientation is set to north-up or heading-up. The letter(s) beside this symbol indicate the vehicle’s heading direction (e.g. N for north). In 3D map, only a heading-up view is available. 195 Options button Select to display the “Navigation Options” screen. 192 “GPS” mark (Global Positioning System) Shows that the vehicle is receiving signals from the GPS. 255 190 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 191

    1. BASIC OPERATION No. Name Function Page Traffic indicator Shows that traffic information is received. Select to start voice guidance for traffic information. When traffic information is received via HD, HD mark is displayed on the right. 204 Scale indicator This figure indicates the map scale. 194 Zoom in/out button Select to magnify or reduce the map scale. When either button is selected, the map scale indicator bar appears at the bottom of the screen. 194 Footprint button Select to display the footprint map screen. 194  Select to display the current position address.  Select to repeat voice guidance. 228 Select to display the “Destination” screen. 207 Speed limit icon Indicates the speed limit on the current road. The display of the speed limit icon can be set to on/off. 200 Route information bar Displays the current street name, or the distance with the estimated travel time/arrival time to the ...
  • Page 192

    1. BASIC OPERATION NAVIGATION OPTIONS SCREEN The navigation options allow you to change map configurations, display/hide POI icons, and edit the navigation routes. To display the “Navigation Options” screen, press the “APPS” button, select “Navigation” on the “Apps” screen, and select “Options” on the map screen. No. Function Page Select to display the desired map configuration. 196 Select to set display of the map information such as POI icons, route trace, speed limit, etc. 200 Select to display the map version and coverage area. 258 Select to edit the set route. 229 Select to pause or resume route guidance. 222 Select to display the overview of the entire route. 224 192 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 193

    1. BASIC OPERATION 2. MAP SCREEN OPERATION CURRENT POSITION DISPLAY 1 Press the “APPS” button. 2 3 Select “Navigation”. INFORMATION ● While driving, the current position mark is fixed on the screen and the map moves. ● The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS. ● After the battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. Check that the current position map is displayed. 7 NAVIGATION SYSTEM  To correct the current position manually: P.246 193 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 194

    1. BASIC OPERATION FOOTPRINT MAP MAP SCALE 1 Select or to change the scale of the map screen. For areas covered by the footprint map (some major cities), a footprint map on a scale of 75 ft. (25 m) can be selected. When the map is scaled down to 150 ft. (50 m), changes to and can be selected to display the footprint map.  The scale indicator bar appears at the bottom of the screen. 1 Select 2 Check that the footprint map is displayed. on the map screen.  Select and hold or to continue changing the scale of the map screen.  The scale of the map screen can also be changed by selecting the scale bar directly. This function is not available while driving. INFORMATION ● The map scale is displayed above the zoom in button at the bottom left of the screen. ● In areas where the footprint map is avail-  To return to the normal map display, select . able the map scale changes from to when at the minimum range. 194 ...
  • Page 195

    1. BASIC OPERATION INFORMATION ● If the map or the current position is moved to the area which is not covered by the footprint map, the screen scale automatically changes to 150 ft. (50 m). ● On the footprint map, a one way street is displayed by . ● Scrolling on the footprint map is not available while driving. ORIENTATION OF THE MAP The orientation of the map can be changed between 2D north-up, 2D heading-up and 3D heading-up by selecting the orientation symbol displayed at the top left of the screen. 1 Select , or . North-up screen Building footprints in the database were created and provided by NAVTEQ. 7 Heading-up screen NAVIGATION SYSTEM 195 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 196

    1. BASIC OPERATION 3D screen SWITCHING THE MAP MODE 1 2 3 Select “Options” on the map screen. Select “Map Mode”. Select the desired configuration button. : North-up symbol Regardless of the direction of vehicle travel, north is always up. : Heading-up symbol The direction of vehicle travel is always up. : 3D Heading-up symbol The direction of vehicle travel is always up.  The letter(s) beside this symbol indicate the vehicle’s heading direction (e.g. N for north). No. Function Page Select to display the single map screen. 197 Select to display the dual map screen. 197 Select to display the compass mode screen. 198 Select to display the turn list screen. 227 Select to display the freeway exit list screen. 225 Select to display the intersection guidance screen or the guidance screen on the freeway. 226 Select to display the turnby-turn arrow screen. 227 196 PRIUS v_Navi_OM47895U_(U) 14.09.24 19 ...
  • Page 197

    1. BASIC OPERATION  Depending on the conditions, certain screen configuration buttons cannot be selected. Editing right map ■MAP ONLY 1 2 The right side map can be edited. Select any point on the right side map. Select the desired item. ■DUAL MAP  The map on the left is the main map. Function Page Select to change the orientation of the map. 195 Select to display POI icons. 200 7 Select to show traffic information. 204 Select to change the map scale. 194 NAVIGATION SYSTEM No.  When set to on, the indicator will illuminate. 197 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 198

    1. BASIC OPERATION ■COMPASS Information about the destination, current position and a compass is displayed on the screen. No. Information/Function Cursor mark Distance from the current position to the cursor mark. INFORMATION ● The destination mark is displayed in the direction of the destination. When driving, refer to the longitude and latitude coordinates, and the compass, to make sure that the vehicle is headed in the direction of the destination. ● When the vehicle travels out of the coverage area, the guidance screen changes to the whole compass mode screen. SCREEN SCROLL OPERATION Use the scroll feature to move the desired point to the center of the screen for looking at a point on the map that is different from the current position. Select to set as a destination. When selecting “Go to ” on the following map screen, the navigation system performs a search for the route. (P.219) If a destination has already been set, “Go to ” and “Add ...
  • Page 199

    1. BASIC OPERATION ADJUSTING LOCATION IN SMALL INCREMENTS The cursor location can be adjusted in small increments when “Adjust Location” is selected on the setting map screen. Also, when changing the location of memory points on the editing screen (P.240) and adjusting the current position mark manually on the “Calibration” screen (P.246), 8 directional arrows may appear for this purpose. 1 Select one of the 8 directional arrows to move the cursor to the desired point and then select “OK”. 7 NAVIGATION SYSTEM 199 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 200

    1. BASIC OPERATION 3. MAP SCREEN INFORMATION SELECTING THE POI ICONS DISPLAYING MAP INFORMATION Information such as POI icons, route trace, speed limit, etc. can be displayed on the map screen. 1 2 3 1 Display the “Map Information” screen. (P.200) 2 Select “Select POI”. Select “Options” on the map screen.  When the POI icons to be displayed on the map screen have already been set, “Change POI” is displayed. Select “Map Information”. 3 Select the desired items to be displayed. Select the desired POI category and select “OK”. No. No. Function Page Select to display the selected POI icons.  Select to select or change POI icons. 200 Select trace. to display route 202 Select to display speed limit icon.  Select to display traffic information. 204 Information/Function Page Displays up to 5 selected POI icons on the map screen  Select to cancel the selected POI icons. ...
  • Page 201

    1. BASIC OPERATION ■SELECTING OTHER POI ICONS TO ■DISPLAYING THE LOCAL POI LIST BE DISPLAYED 1 2 Select “Other POIs”. Select the desired POI categories and select “OK”. “List All Categories”: Select to display all POI categories. To add more POI categories, select “More”. POIs that are within 20 miles (32 km) of the current position will be listed from among the selected categories. 1 2 Select “Find Local POI”. Select the desired POI. “Near...”: Select to search for POIs near the current position or along the route. 3 Check that the selected POI is displayed on the map screen. (P.198) 7 NAVIGATION SYSTEM When “Near...” is selected 1 Select the desired item. “Near Here”: Select to search for POIs near the current position. “Along My Route”: Select to search for POIs along the route. 201 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 202

    1. BASIC OPERATION ROUTE TRACE The traveled route can be stored and retraced on the map screen. This feature is available when the map scale is 30 miles (50 km) or less. 1 Display the “Map Information” screen. (P.200) 2 Select “Route Trace”. DISPLAYING INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET When the cursor is placed over an icon on the map screen, the name bar is displayed on the upper part of the screen. If “Info” appears on the right side of the name bar, detailed information can be displayed.  The “Route Trace” indicator illuminates and the route trace starts. 1 Place the cursor over an icon. 3 2 Select “Info”. Check that the traveled line is displayed. ■STOP RECORDING THE ROUTE POI information TRACE 1 2 Select “Route Trace” again. A confirmation screen will be displayed. “Yes”: Select to keep the recorded route trace. “No”: Select to erase the recorded route trace. Memory point information ...
  • Page 203

    1. BASIC OPERATION Destination information STANDARD MAP ICONS Icon Name Island Park No. Function Industry Select to register as a memory point. To change the icon, name, etc.: P.238 Business facility Select to set as a destination. Airport Select to call the registered number. Select to delete destination or memory point. INFORMATION ● Even when traffic information is not currently being received, traffic information and “Info” will be displayed for a while after traffic information has been received. 7 University NAVIGATION SYSTEM Select to display the edit memory point screen. Military Hospital Stadium Shopping mall Golf 203 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 204

    1. BASIC OPERATION 4. TRAFFIC INFORMATION Traffic data can be received via HD or Entune App Suite to display traffic information on the map screen. 1 A list of current traffic information can be displayed along with information on the incident’s distance and position relative to the vehicle. Press the “APPS” button. 2 3 DISPLAYING TRAFFIC INFORMATION 1 Display the “Traffic screen. (P.204) 2 3 Select “Traffic Event List”. Select the desired traffic information. “On Current Road”: Select to display traffic information for the current road. “On Current Route”: Select to display traffic information for the set route. Select “Traffic”. Select the desired item.  When set to on, the indicator will illuminate. 4 No. Information” Function Page Select to display a list of current traffic information. 204 Select to display a map with predictive traffic data. 205 Select to display traffic along the saved routes. ...
  • Page 205

    1. BASIC OPERATION DISPLAYING PREDICTIVE TRAFFIC INFORMATION A map with predictive traffic data can be displayed. 1 2 3 Display the “Traffic screen. (P.204) Information” MY TRAFFIC ROUTES Traffic information along the saved routes can be displayed. To use this function, it is necessary to register a route. (P.251) 1 Display the “Traffic screen. (P.204) 2 Select “My Traffic Routes”. Select “Predictive Traffic Map”. Scroll the map to the desired point and set the time of predictive traffic information. Information”  If map data has been updated, a confirmation screen will be displayed. Select “OK” or “Do Not Tell Me Again”. 3 Select the desired route. 7 “ ”: Moves the time forward 15 minutes. “ ”: Moves the time back 15 minutes. “Options”: Select to add, edit or delete personal routes. (P.250)  If routes have not been registered yet, a confirmation screen will be displayed. Select “Yes” to register the route. ...
  • Page 206

    1. BASIC OPERATION 5 Check that the traffic information is displayed. DISPLAYING TRAFFIC INFORMATION ON THE MAP 1 2 3 Select “Options” on the map screen. Select “Map Information”. Select “Traffic Information”.  When set to on, the indicator will illuminate. “Detail”: Select to display detailed traffic information. 4 Check that the traffic information is displayed. No. Information/Function The icons show traffic incident, road repair, traffic obstacles, etc. Select to display traffic information and start voice guidance for the traffic information. The color of the arrow changes depending on the traffic information received. The indicator is displayed as follows. : Traffic information has been received. : Traffic information has been received via HD. No icon: Any traffic information has not been received. INFORMATION ● Traffic information may take some time to load after the system is turned on. 206 PRIUS v_Navi_OM47895U_( ...
  • Page 207

    2. DESTINATION SEARCH 1. DESTINATION SEARCH SCREEN The “Destination” screen enables to search for a destination. To display the “Destination” screen, press the “APPS” button, and select “Navigation” on the “Apps” screen. Then select “Dest.” on the map screen. 7 NAVIGATION SYSTEM 207 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 208

    2. DESTINATION SEARCH No. Function Page Select to search for a destination by address. 211 Select to search for a destination by point of interest. 212 Select to search for a destination from previously set destinations. 215 Select to search for a destination from a registered entry in “Address book”. 215 Select to search for a destination by online database. 271 Select to search for a destination from emergency service points. 216 Select to search for a destination by intersection or freeway entrance/ exit. 216 Select to search for a destination by the last displayed map. 218 Select to search for a destination by coordinates. 218 Select to set a destination by home. 210 Select to set a destination from preset destinations. 210 Select to delete set destinations. 230 208 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 209

    2. DESTINATION SEARCH 2. SEARCH OPERATION 1 Press the “APPS” button. 5 2 Select “Navigation”. 3 4 Select “Dest.”. Select to adjust the position in smaller increments. (P.199) Search for a destination. Select to register as a memory point. Select “Go” when the confirm destination screen is displayed. No. Function Select to call the registered number. 209 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 7 NAVIGATION SYSTEM  There are different kinds of methods to search for a destination. (P.207) Select to search for the route. (P.219) If a destination has already been set, “Go Directly” and “Add to Route” will be displayed. “Go Directly”: Select to delete the existing destination(s) and set a new one. “Add to Route”: Select to add a destination. ...
  • Page 210

    2. DESTINATION SEARCH SELECTING SEARCH AREA The selected state (province) can be changed to set a destination from a different state (province) by using “Address”, “Point of Interest” or “Intersection & Freeway”. 1 Display the (P.209) 2 Select “Address”, “Point of Interest” or “Intersection & Freeway”. 3 Select “Select State/Province” or “Change State/Province”. “Destination” screen.  If a state (province) has not been selected yet, “Select State/Province” is displayed. 4 Select the desired state (province). SETTING HOME AS DESTINATION To use this function, it is necessary to register a home address. (P.235) 1 Display the (P.209) 2 Select “Go Home”. “Destination” screen.  The navigation system performs a search for the route and the entire route map is displayed. (P.219) SETTING PRESET DESTINATIONS AS DESTINATION To use this function, it is necessary to register preset destinations to the preset sc ...
  • Page 211

    2. DESTINATION SEARCH SEARCHING BY ADDRESS There are 2 methods to search for a destination by address. 1 Display the (P.209) 2 3 Select “Address”. “Destination” screen. 5 6 Function Page SEARCHING BY STREET ADDRESS 211 Select to search by street address. 211 1 2 Select “Street Address”. 3 4 5 6 Enter a street name and select “OK”. Enter a house number and select “OK”. Select the desired street name. Enter a city name and select “OK”. 7 Select the desired city name.  If the same address exists, the address list screen will be displayed. Select the desired address. INFORMATION SEARCHING BY CITY 1 2 Select “City”. Enter a city name and select “OK”. “Last 5 Cities”: Select the city name from the list of the last 5 cities. 3 4 ● A street name can be searched using only the body part of its name. For example: S WESTERN AVE • A search can be performed by entering “S WESTERN AVE”, “WE ...
  • Page 212

    2. DESTINATION SEARCH SEARCHING BY POINT OF INTEREST There are 3 methods to search for a destination by Points of Interest. 1 Display the (P.209) 2 3 Select “Point of Interest”. “Destination” SEARCHING BY NAME 1 2 3 Select “Name”. Enter a POI name and select “OK”. Select the desired POI. screen. Select the desired search method. No. No. Function Page Select to search by name. 212 Select to search by category. 213 Select to search by phone number. 214 Function Page Select to search for POI in the desired city. 213 Select to search for POI from the category list. 213  When entering the name of a specific POI, and there are 2 or more sites with the same name, the list screen will be displayed. Select the desired POI. INFORMATION ● To search for a facility name using multiple search words, put a space between each word. 212 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 213

    2. DESTINATION SEARCH ■SELECTING A CITY TO SEARCH 1 2 Select “City”. Enter a city name and select “OK”. “Any City”: Select to cancel the city setting. 3 4 SEARCHING BY CATEGORY 1 2 Select “Category”. Select the desired search point. Select the desired city name. Select the desired POI. ■SELECTING FROM THE CATEGORIES 1 2 Select “Category”. No. Select the desired category. Function Select to set the search point from near the current position. Select to search for POIs along the set route. 7 Select to set the search point from near a destination.  If there is more than 1 detailed item of the selected category, the detailed list will be displayed. 3 Select the desired POI category. “List All Categories”: Select to display all POI categories. 3 Select the desired POI.  If there is more than 1 detailed item of the selected category, the detailed list will be displayed. 213 PRIUS v_Navi_OM47895U_(U ...
  • Page 214

    2. DESTINATION SEARCH “List All Categories”: Select to display all POI categories. “Favorite POI Categories”: Select to use the 6 POIs that have been previously set. (P.245) 4 Select the desired POI. INFORMATION ● The names of POIs located within approximately 200 miles (320 km) from the selected search point can be displayed. When “Near a City Center in XX*” is selected 1 2 SEARCHING BY PHONE NUMBER 1 2 Select “Phone #”. Enter a phone number and select “OK”.  If there is more than 1 site with the same number, the list screen will be displayed. INFORMATION ● If there is no match for the entered phone number, a list of identical numbers with different area codes will be displayed. Select “Near a City Center in XX”. Enter a city name and select “OK”. “Last 5 Cities”: Select the city name from the list of the last 5 cities. 3 4 Select the desired city name. 5 Follow the steps from 3 onward in “SEARCHING BY CATEGORY ...
  • Page 215

    2. DESTINATION SEARCH SEARCHING FROM PREVIOUS DESTINATIONS 1 Display the (P.209) 2 3 Select “Previous Destinations”. “Destination” screen. Select the desired destination. To use this function, it is necessary to register an address book entry. (P.238) 1 Display the (P.209) 2 3 Select “Address Book”. “Destination” screen. Select the desired address book entry. 7  “Options”: Select to register or edit address book entries. (P.239) INFORMATION ● The previous start point and up to 100 previously set destinations are displayed on the screen. 215 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 NAVIGATION SYSTEM “Previous Start Point”: Select to display the start point map of the previous guided route. “Delete”: Select to delete the previous destination. (P.243) SEARCHING BY ADDRESS BOOK ...
  • Page 216

    2. DESTINATION SEARCH SEARCHING BY EMERGENCY 1 Display the (P.209) 2 3 Select “Emergency”. “Destination” SEARCHING BY INTERSECTION AND FREEWAY screen. Select the desired emergency category. 4 There are 2 methods to search for a destination by Intersection & Freeway. 1 Display the (P.209) 2 3 Select “Intersection & Freeway”. “Destination” screen. Select the desired method. Select the desired destination. INFORMATION ● The navigation system does not guide in areas where route guidance is unavailable. (P.256) No. Function Page Select to search by intersection. 217 Select to search by freeway entrance/exit. 217 216 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 217

    2. DESTINATION SEARCH SEARCHING BY INTERSECTION 1 2 Select “Intersection”. 3 4 1 2 Select “Freeway Entrance / Exit”. 3 4 Select the desired freeway. Select the desired street name. Enter the name of the second intersecting street and select “OK”. 5 Enter a freeway entrance or exit name and select “OK”. 6 Select the desired entrance or exit name. Enter the name of the first intersecting street which is located near the destination and select “OK”. Select the desired street name.  If the 2 streets cross at more than 1 intersection in a city, the list of intersections will be displayed. Enter a freeway name and select “OK”. Select “Entrance” or “Exit”. INFORMATION ● Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination. Freeways and interstates use an “I” (I405). US highways use the state designation before the number (CA-118). 217 PRIUS v_Navi_OM4 ...
  • Page 218

    2. DESTINATION SEARCH SEARCHING BY MAP SEARCHING BY COORDINATES By selecting “Map” the last displayed location is displayed again on the map screen. You can search for a destination from this map. 1 Display the (P.209) 2 3 Select “Map”. “Destination” screen. 1 Display the (P.209) 2 3 Select “Coordinates”. “Destination” screen. Enter the latitude and longitude and select “OK”. Scroll the map to the desired point and select “Go to ”. “Adjust Location”: Select to adjust the position in smaller increments. (P.199)  If a destination has already been set, “Go to ” and “Add to Route” will be displayed. “Go to ”: Select to delete the existing destination(s) and set a new one. “Add to Route”: Select to add a destination.  The navigation system performs a search for the route and the entire route map is displayed. (P.219) 218 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 219

    2. DESTINATION SEARCH 3. STARTING ROUTE GUIDANCE When the destination is set, the entire route map from the current position to the destination is displayed. STARTING ROUTE GUIDANCE 1 Select “OK” to start guidance. No. Select the desired route from 3 possible routes. (P.220) the route. Select to display a list of the turns required to reach the destination. (P.221) ● The route for returning may not be the same as that for going. ● The route guidance to the destination may not be the shortest route or a route without traffic congestion. ● Route guidance may not be available if there is no road data for the specified location. ● When setting the destination on a map with a scale more than 0.5 mile (800 m), the map scale changes to 0.5 miles (800 m) automatically. If this occurs, set the destination again. ● If a destination that is not located on a road is set, the vehicle will be guided to the point on a road nearest to the destination. ...
  • Page 220

    2. DESTINATION SEARCH 3 ROUTES SELECTION ■DISPLAYING 3 ROUTES INFORMATION 1 2 Select “3 Routes”. Select the desired route. No. 1 2 Select “Info”. Check that the “3 Route Information” screen is displayed. Function Select to display the quickest route. No. Information Select to display the route that is the shortest distance to the set destination. Time necessary for the entire trip Select to display the alternative route. Distance of the toll road Select to display the information about the 3 routes. (P.220) Distance of the freeway Distance of the entire trip Distance of the ferry trip 220 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 221

    2. DESTINATION SEARCH DISPLAYING TURN LIST A list of turn information from the current position to the destination can be displayed. 1 2 Select “Turn List”. Check that the turn list is displayed. Information Destinations can be added, reordered or deleted, and conditions for the route to the destination can be changed. 1 2 Select “Edit Route”. Select the desired item. Function Page Current position Select to add destinations. 230 7 Distance to the next turn Select to delete destinations. 230 Select to reorder destinations. 230 Select to set route preferences. 231 Select to change route type. 231 NAVIGATION SYSTEM No. EDITING ROUTE Turn direction at the intersection Select to display the map of the selected point. INFORMATION ● However, not all road names on the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through 2 or more c ...
  • Page 222

    2. DESTINATION SEARCH INFORMATION ● Even if the “Freeways” indicator is dimmed, the route cannot avoid including a freeway in some cases. (P.231) ● If the calculated route includes a trip by ferry, the route guidance shows a sea route. After traveling by ferry, the current position may be incorrect. Upon reception of GPS signals, it is automatically corrected. PAUSING GUIDANCE 1 2 Select “Options” on the map screen. Select “Pause Guidance”. RESUMING GUIDANCE 1 Select “Resume Guidance”. 222 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 223

    3. ROUTE GUIDANCE 1. ROUTE GUIDANCE SCREEN During the route guidance, various types of guidance screens can be displayed depending on conditions. SCREEN FOR ROUTE GUIDANCE CHANGING ROUTE INFORMATION BAR When the vehicle is on the guidance route, the route information bar displays the current street name or the distance with the estimated travel/arrival time to the destination. 1 Select the route information bar ( ) or the route information button ( ) to change the display of the route information bar. No. Information/Function Distance to the next turn and an arrow indicating the turning direction 7 Current position Current street name or route information INFORMATION ● If the vehicle goes off the guidance route, the route is searched again. ● For some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select a road that should not be traveled on. ● When arriving at the set dest ...
  • Page 224

    3. ROUTE GUIDANCE INFORMATION ● When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time are calculated based on the average speed for the specified speed limit. ● When the vehicle gets off the guidance route, the arrow facing the destination is displayed instead of the estimated travel/arrival time. ● The route information bar fills from left to right as the vehicle progresses on the route. ROUTE OVERVIEW The entire route from the current position to the destination can be displayed during the route guidance. 1 2 3 Select “Options” on the map screen. Select “Route Overview”. Check that the entire route map is displayed. DISTANCE AND TIME TO DESTINATION When driving on the guidance route with more than 1 destination set, a list of the distance with estimated travel/ arrival time from the current position to each destination is displayed. 1 2  For details about this scree ...
  • Page 225

    3. ROUTE GUIDANCE DURING FREEWAY DRIVING During freeway driving, the freeway exit information screen will be displayed. No./ Icon Information/Function Distance and time from the current position to the road traffic facilities. WHEN APPROACHING FREEWAY EXIT OR JUNCTION When the vehicle approaches an exit or junction, the freeway guidance screen will be displayed. No. Information/Function Next exit or junction name Distance from the current position to the exit or junction 7 POIs that are close to a freeway exit. Select to hide the freeway guidance screen. To return to the freeway Select to display the selected map of the exit vicinity. guidance screen, select NAVIGATION SYSTEM Name of the road traffic facilities. Select to display the nearest road traffic facilities from the current position. . Remaining distance bar to the guidance point Select to scroll to farther road traffic facilities. Select to scroll to closer ro ...
  • Page 226

    3. ROUTE GUIDANCE TOLLGATE GUIDANCE When the vehicle approaches a tollgate, the tollgate view will be displayed. No. WHEN APPROACHING INTERSECTION When the vehicle approaches an intersection, the intersection guidance screen will be displayed. Information/Function Distance from the current position to the tollgate No. Information/Function Next street name Select to hide the tollgate guidance screen. To return to the tollgate guidance screen, select . Remaining distance bar to the guidance point Distance to the intersection Select to hide the intersection guidance screen. To return to the intersection guidance screen, select . Remaining distance bar to the guidance point 226 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 227

    3. ROUTE GUIDANCE TURN LIST SCREEN 1 2 Select “Turn List” on the “Map Mode” screen. (P.196) Check that the turn list screen is displayed. No. TURN-BY-TURN ARROW SCREEN On this screen, information about the next turn on the guidance route can be displayed. 1 Select “Turn-by-Turn Arrow” on the “Map Mode” screen. (P.196) 2 Check that the turn-by-turn arrow screen is displayed. Information/Function Turn direction 7 Distance between turns No. Information/Function NAVIGATION SYSTEM Next street or destination name Exit number or street name Turn direction Distance to the next turn 227 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 228

    3. ROUTE GUIDANCE 2. TYPICAL VOICE GUIDANCE PROMPTS As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the system’s voice guidance will provide various messages. WARNING ● Be sure to obey the traffic regulations and keep the road condition in mind especially when you are driving on IPD roads (roads that are not completely digitized in our database). The route guidance may not have the updated information such as the direction of a one way street. INFORMATION ● If a voice guidance command cannot be heard, select on the map screen to hear it again. ● To adjust the voice guidance volume: P.63 ● Voice guidance may be made early or late. ● If the system cannot determine the current position correctly, you may not hear voice guidance or may not see the magnified intersection on the screen. 228 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 229

    3. ROUTE GUIDANCE 3. EDITING ROUTE 1 Press the “APPS” button. 5 Select the item to be set. No. Function Page 2 Select “Navigation”. Select to add destinations. 230 3 4 Select “Options”. Select to delete destinations. 230 Select to reorder destinations. 230 Select to set route preferences. 231 Select to change route type. 231 Select to set detours. 232 Select to start from adjacent road. 233 Select “Edit Route”. Check that the entire route map is displayed. (P.219) 229 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 NAVIGATION SYSTEM 6 7 ...
  • Page 230

    3. ROUTE GUIDANCE ADDING DESTINATIONS 1 2 3 4 Display the (P.229) “Edit Route” REORDERING DESTINATIONS screen. Select “Add”. When more than 1 destination has been set, the arrival order of the destinations can be changed. Search for an additional destination in the same way as a destination search. (P.207) 1 Display the (P.229) Select “Add Destination Here” to insert the new destination into the route. 2 3 Select “Reorder”. “Edit Route” screen. Select the desired destination and select “Move Up” or “Move Down” to change the arrival order. Then select “OK”. DELETING DESTINATIONS 1 Display the (P.229) 2 3 Select “Delete”. “Edit Route” screen. Select “Yes” when the confirmation screen appears.  When more than 1 destination has been set, a list will be displayed on the screen. Select the item(s) to be deleted. “Delete All”: Select to delete all destinations on the list.  If more than 1 ...
  • Page 231

    3. ROUTE GUIDANCE SETTING ROUTE PREFERENCES SELECTING ROUTE TYPE The conditions to determine the route can be selected from various choices such as freeways, toll roads, ferries, etc. 1 Display the (P.229) 2 3 Select “Preferences”. “Edit Route” 1 Display the (P.229) 2 3 Select “Route Type”. “Edit Route” screen. Select the desired route type. screen. Select the desired route preferences and select “OK”.  During driving, the route guidance starts after selecting the desired route type. 4 The entire route from the starting point to the destination is displayed. 7  For details about this screen: P.219 NAVIGATION SYSTEM  When set to on, the indicator will illuminate. 231 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 232

    3. ROUTE GUIDANCE DETOUR SETTING INFORMATION During the route guidance, the route can be changed to detour around a section of the route where a delay is caused by road repairs, an accident, etc. 1 Display the (P.229) 2 3 Select “Detour”. “Edit Route” screen. ● This picture shows an example of how the system would guide around a delay caused by a traffic jam. Select the desired detour distance. No. Function Select to detour the route for the next 1 mile. This position indicates the location of a traffic jam caused by road repairs, an accident, etc. This route indicates the detour suggested by the system. ● When the vehicle is on a freeway, the detour distance selections are 5, 15 and 25 miles (or 5, 15 and 25 km if units are in km). ● The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions. Select to detour the route for the next 3 miles. Select to det ...
  • Page 233

    3. ROUTE GUIDANCE STARTING FROM ADJACENT ROAD When a freeway and a surface road run in parallel, the system may show the guidance route going on the freeway while driving on the surface road, or vice versa. If this happens, you can instantly choose the adjacent road for the route guidance. 1 Display the (P.229) 2 Select “Start from Adjacent Road”. “Edit Route” screen. INFORMATION ● When there is no adjacent road, this screen button will not be displayed. 7 NAVIGATION SYSTEM 233 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 234

    4. MEMORY POINTS 1. MEMORY POINTS SETTINGS Home, preset destinations, address book entries, areas to avoid can be set as memory points. The registered points can be used as the destinations. (P.207) 4 Select the desired item to be set. Registered areas to avoid, will be avoided when the system searches for a route. 1 2 3 Press the “APPS” button. Select “Setup”. Select “Navigation”. No. Function Page Select to set home. 235 Select to set preset destinations. 236 Select to set the address book. 238 Select to set areas to avoid. 241 Select to delete previous destinations. 243 Select to set detailed navigation settings. 244 234 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 235

    4. MEMORY POINTS EDITING HOME SETTING UP HOME If home has been registered, that information can be recalled by selecting “Go Home” on the “Destination” screen. (P.210) 1 Display the “Navigation screen. (P.234) 2 3 Select “Home”. 1 2 Select “Edit”. Select the desired item to be edited. Settings” Select the desired item to be set. No. Function Page Select to edit the home name. 240 Select to set display of the home name on/off.  7 Function Page Select to register home. 235 Select to edit home. 235 Select to delete home. 235 3 Select “Set Home”. 3 Select “OK” when the editing home screen appears. Select the desired item to search for the location. (P.207) Select to edit the phone number. 240 Select to change the icon to be displayed on the map screen. 239 Select “OK”. DELETING HOME REGISTERING HOME 1 2 240 1 2 Select “Delete”. Select “Yes” when the ...
  • Page 236

    4. MEMORY POINTS REGISTERING PRESET DESTINATIONS SETTING UP PRESET DESTINATIONS If a preset destination has been registered, that information can be recalled by using preset destinations on the “Destination” screen. (P.210) 1 Display the “Navigation screen. (P.234) 2 3 Select “Preset Destinations”. 1 2 Select “Set”. 3 Select a position for this preset destination. 4 Select “OK” when the editing preset destination screen appears. (P.237) Settings” Select the desired item to search for the location. (P.207) Select the desired item. INFORMATION No. Function Page Select to register a preset destination. 236 Select to edit a preset destination. 237 Select to delete a preset destination. 237 ● Up to 5 preset destinations can be registered. 236 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 237

    4. MEMORY POINTS EDITING PRESET DESTINATIONS 1 2 3 Select “Edit”. Select the desired preset destination. 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. Select the item to be edited. No. Function Page Select to edit the preset destination name. 240 Select to set display of the preset destination name on/off.  Select to edit location information. 240 Select to edit the phone number. 240 Select to change the icon to be displayed on the map screen. 239 Select the preset destination to be deleted and select “Delete”. 7 NAVIGATION SYSTEM 4 DELETING PRESET DESTINATIONS Select “OK”. 237 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 238

    4. MEMORY POINTS REGISTERING ADDRESS BOOK ENTRIES SETTING UP ADDRESS BOOK Points on the map can be registered. 1 Display the “Navigation screen. (P.234) 2 3 Select “Address Book”. Settings” 1 2 Select “New”. 3 Select “OK” when the editing address book entry screen appears. (P.239) Select the desired item to search for the location. (P.207) Select the desired item. INFORMATION ● Up to 100 address book entries can be registered. No. Function Page Select to register address book entries. 238 Select to edit address book entries. 239 Select to delete address book entries. 240 238 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 239

    4. MEMORY POINTS ■CHANGING THE ICON EDITING ADDRESS BOOK ENTRIES The icon, name, location and/or phone number of a registered address book entry can be edited. 1 2 3 1 2 Select “Edit” next to the “Icon”. Select the desired icon. Select “Edit”. Select the desired address book entry. Select the item to be edited.  Change pages by selecting the “Page 1”, “Page 2” or “With Sound” tab. “With Sound”: Select the memory points with a sound 7 No. Page Select to edit the address book entry name. 240 Select to set display of the address book entry name on/off.  Select to edit location information. 240 Select to edit the phone number. 240 Select to change the icon to be displayed on the map screen. 239 NAVIGATION SYSTEM 4 Function Select “OK”. 239 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 240

    4. MEMORY POINTS When the “With Sound” tab is selected A sound for some address book entries can be set. When the vehicle approaches the location of the address book entry, the selected sound will be heard. 1 2 Select the “With Sound” tab. ■CHANGING THE NAME 1 2 : Select to play the sound. Enter a name and select “OK”. ■CHANGING THE LOCATION 1 2 Select the desired sound icon.  When “Bell (with Direction)” is selected, select an arrow to adjust the direction and select “OK”. Select “Edit” next to “Name”. Select “Edit” next to “Location”. Scroll the map to the desired point (P.199) and select “OK”. ■CHANGING PHONE NUMBER 1 Select “Edit” next to “Phone #”. 2 Enter the phone number and select “OK”. DELETING ADDRESS BOOK ENTRIES 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. INFORMATION Select the item to be deleted and select “Delete”. ● The bell sounds only when th ...
  • Page 241

    4. MEMORY POINTS REGISTERING AREAS TO AVOID SETTING UP AREAS TO AVOID Areas to be avoided because of traffic jams, construction work or other reasons can be registered as “Areas to Avoid”. 1 Display the “Navigation screen. (P.234) 2 3 Select “Areas to Avoid”. Settings” 1 2 Select “New”. 3 Select either or to change the size of the area to be avoided and select “OK”. 4 Select “OK” when the editing area to avoid screen appears. Select the desired item to search for the location. (P.207) Select the desired item. Function Page Select to register areas to avoid. 241 Select to edit areas to avoid. 242 Select to delete areas to avoid. 243 INFORMATION ● If a destination is entered in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown. ● Up to 10 locations can be registered as points/areas ...
  • Page 242

    4. MEMORY POINTS ■CHANGING THE NAME EDITING AREAS TO AVOID The name, location and/or area size of a registered area can be edited. 1 2 3 1 2 Select “Edit” next to “Name”. Enter a name and select “OK”. Select “Edit”. ■CHANGING THE LOCATION Select the area and select “OK”. 1 2 Select the item to be edited. Select “Edit” next to “Location”. Scroll the map to the desired point (P.199) and select “OK”. ■CHANGING THE AREA SIZE No. Function Page Select to edit the name of the area to avoid. 242 Select to set display of the area to avoid name on/off.  Select to edit area location. 242 Select to edit area size. 242 Select to set the area to avoid function on/off. 4 1 Select “Edit” next to “Size”. 2 Select either or to change the size of the area to be avoided and select “OK”.  Select “OK”. 242 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 243

    4. MEMORY POINTS DELETING AREAS TO AVOID 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. Select the area to be deleted and select “Delete”. DELETING PREVIOUS DESTINATIONS Previous destinations can be deleted. 1 Display the “Navigation screen. (P.234) 2 3 Select “Delete Previous Dest.”. 4 Select “Yes” when the confirmation screen appears. Settings” Select the previous destination to be deleted and select “Delete”. 7 NAVIGATION SYSTEM 243 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 244

    5. SETUP 1. DETAILED NAVIGATION SETTINGS Settings are available for pop-up information, favorite POI categories, low fuel warning, etc. 1 Press the “APPS” button. 2 3 4 5 6 Select “Setup”. SCREENS FOR NAVIGATION SETTINGS Select “Navigation”. Select “Detailed Navi. Settings”. Select the items to be set. Select “OK”. 244 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 245

    5. SETUP No. Function Page Select to set the voice guidance for the next street name on/off.  Select to set IPD road guidance on/off.  Select to set favorite POI categories that are used for POI selection to display on the map screen. 245 Select to adjust the current position mark manually or to adjust miscalculation of the distance caused by tire replacement. 246 Select to set display of popup information on/off.  Select to set display of low fuel warning on/off. 247 Select to reset all setup items.  FAVORITE POI CATEGORIES (SELECT POI ICONS) Up to 6 POI icons, which are used for selecting POIs on the map screen, can be selected as favorites. 1 Display the “Detailed Navi. Settings” screen. (P.244) 2 3 Select “Favorite POI Categories”. Select the category to be changed. 7 4 Select the desired POI category. “List All Categories”: Select to display all POI categories. 5 Select the d ...
  • Page 246

    5. SETUP CURRENT POSITION/TIRE CHANGE CALIBRATION The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1 Display the “Detailed Navi. Settings” screen. (P.244) 2 3 Select “Calibration”. Select the desired item. ■POSITION/DIRECTION CALIBRA- TION When driving, the current position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, the current position mark can be adjusted manually. 1 2 Select “Position / Direction”. 3 Select an arrow to adjust the direction of the current position mark and select “OK”. Scroll the map to the desired point (P.199) and select “OK”.  For additional information on the accuracy of a current position: P.255 246 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 247

    5. SETUP ■TIRE CHANGE CALIBRATION ■SEARCHING GAS STATION IN LOW FUEL WARNING The tire change calibration function will be used when replacing the tires. This function will adjust miscalculation caused by the circumference difference between the old and new tires. 1 Select “Tire Change”.  The message appears and the quick distance calibration starts automatically. A nearby gas station can be selected as a destination. 1 Select “Yes” when the low fuel warning appears. 2 Select the desired nearby gas station. 3 Select “Enter tion. INFORMATION ● If this procedure is not performed when the tires are replaced, the current position mark may be incorrectly displayed. LOW FUEL WARNING POP-UP 1 Display the “Detailed Navi. Settings” screen. (P.244) 2 Select “Low Fuel Warning Pop-up”. 7 “Info”: Select to display gas station information. (P.202) 247 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 NAVIGATION SYSTEM ...
  • Page 248

    5. SETUP 2. TRAFFIC SETTINGS Traffic information such as traffic congestion or traffic incident warnings can be made available. 1 Press the “APPS” button. 2 3 4 5 Select “Setup”. SCREEN FOR TRAFFIC SETTINGS Select “Traffic”. Select the items to be set. Select “OK”. No. Function Select to set specific routes (such as frequently used routes) on which you wish to receive traffic information. (P.250) Select to set the avoid traffic function auto/manual. (P.249) Select to set the usage of traffic information for the estimated arrival time on/off. Select to set the display of an arrow of free flowing traffic on/off. Select to set to on/off whether to consider the predictive traffic information (P.205) with estimated arrival time and detoured route search. 248 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 249

    5. SETUP No. Function Select to set of traffic incident voice warning on/off. Select to reset all setup items. AUTO AVOID TRAFFIC 1 Display the “Traffic Settings” screen. (P.248) 2 3 Select “Avoid Traffic”. Select the desired item. No. Function Select to select manually whether or not to change routes when congestion information of the guidance route has been received. In this mode, a screen will appear to ask if you wish to reroute. Select to not reroute when congestion information for the guidance route has been received. 4 Select “OK”. 249 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 7 NAVIGATION SYSTEM Select to automatically change routes when congestion information of the guidance route has been received. ...
  • Page 250

    5. SETUP ■CHANGING THE ROUTE MANUALLY When the navigation system calculates a new route, the following screen will be displayed. 1 Select the desired item. No. MY TRAFFIC ROUTES Specific routes (such as frequently used routes) on which you wish to receive traffic information can be registered as “My Traffic Routes”. A route is set by defining a start point and end point, and can be adjusted by setting up to 2 preferred roads. 1 Display the “Traffic Settings” screen. (P.248) 2 3 Select “My Traffic Routes”. Select the desired item. Function Select to start route guidance using the new route. Select to confirm the new route and current route on the map. Select to continue the current route guidance. No. Function Page Select to register personal routes. 251 Select to edit personal routes. 251 Select to delete personal routes. 252 250 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 251

    5. SETUP REGISTERING PERSONAL ROUTES 1 2 Select “New”. 3 4 5 Enter the name and select “OK”. EDITING PERSONAL ROUTES 1 2 Select “Edit”. 3 Select “Edit” next to the item to be edited. Select the desired traffic route. Select “Edit” next to “Name”. Select “Edit” next to “Start”. Select the desired item to search for the location. (P.207) 7 Function Page Select to edit the name of the personal route. 6 Select “Edit” next to “End”. Select to edit start location. 7 Select the desired item to search for the location. (P.207) Select to edit end location. 8 Select “OK” when the editing traffic route screen appears.  The routes can be adjusted by setting preferred roads. (P.252) Select to see and modify the entire route. 4 251 252 Select “OK”.  The entire route map will be displayed. INFORMATION ● Up to 5 routes can be registered. 251 PRIUS v_Navi_OM47895U_(U) 14.09.24 ...
  • Page 252

    5. SETUP DELETING PERSONAL ROUTES 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. Select the traffic route to be deleted and select “Delete”. SETTING PREFERRED ROADS “My Traffic Routes” can be adjusted by setting up to 2 preferred roads. 1 Select “Set Preferred Roads”. 2 Select the desired item. No. Function Page Select to add preferred roads. 253 Select to modify preferred roads. 253 Select to delete preferred roads. 254 252 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 253

    5. SETUP ■ADDING PREFERRED ROADS ■MODIFYING PREFERRED ROADS 1 1 2 Select “Modify”. 3 Scroll the map to the desired point and select “OK”. Select “Add”.  If two preferred roads are already set, select “Yes” and delete a preferred road before add a new one. 2 3 Select the preferred road to be modified if 2 preferred roads have been set. Scroll the map to the desired point and select “OK”. Select “OK” to use this road. “Next”: Select to change road. 4 7 Select “Add Here” for the desired location. NAVIGATION SYSTEM 4 Select “OK” to use this road. “Next”: Select to change road.  If a preferred road is already set, a second preferred road can be added anywhere between the start point, the end point and the existing preferred road. 253 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 254

    5. SETUP ■DELETING PREFERRED ROADS 1 2 Select “Delete”. Select the preferred road to be deleted if 2 preferred roads have been set. “Delete All”: Select to delete all preferred roads on the list. 3 Select “Yes” when the confirmation screen appears. 254 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 255

    6. TIPS FOR THE NAVIGATION SYSTEM 1. GPS (GLOBAL POSITIONING SYSTEM) LIMITATIONS OF THE NAVIGATION SYSTEM This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc. However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances. NOTICE 7 ● The installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. 255 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 NAVIGATION SYSTEM The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current position, normally using 4 or more satellites, and in some case 3 satellites. The GPS system has a ...
  • Page 256

    6. TIPS FOR THE NAVIGATION SYSTEM  Accurate current position may not be shown in the following cases: • When driving on a small angled Yshaped road. • When driving on a winding road. • When driving on a slippery road such as in sand, gravel, snow, etc. • When driving on a long straight road. • When freeway and surface streets run in parallel. • After moving by ferry or vehicle carrier. • When a long route is searched during high speed driving. • When driving without setting the current position calibration correctly. • After repeating a change of direction by going forward and backward, or turning on a turntable in a parking lot. • When leaving a covered parking lot or parking garage. • When a roof carrier is installed. • When driving with tire chains installed. • When the tires are worn. • After replacing a tire or tires. • When using tires that are smaller or larger than the factory specifications. • When the tire pressure in any of the 4 tires is not co ...
  • Page 257

    6. TIPS FOR THE NAVIGATION SYSTEM INFORMATION ● This navigation system uses tire turning data and is designed to work with factory-specified tires for the vehicle. Installing tires that are larger or smaller than the originally equipped diameter may cause inaccurate display of the current position. The tire pressure also affects the diameter of the tires, so make sure that the tire pressure of all 4 tires is correct. 7 NAVIGATION SYSTEM 257 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 258

    6. TIPS FOR THE NAVIGATION SYSTEM 2. MAP DATABASE VERSION AND COVERED AREA MAP INFORMATION 5 Check that the map data screen is displayed. Coverage areas and legal information can be displayed and map data can be updated. 1 Press the “APPS” button. No. Function Map version Select to display map coverage areas. Select to display legal information. 2 3 4 Select “Navigation”. Select “Options”. Select “Map Data”. INFORMATION ● Map data updates are available for a fee. Contact your Toyota dealer for further information. 258 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 259

    6. TIPS FOR THE NAVIGATION SYSTEM ABOUT THE MAP DATA Map data for the navigation system is contained in a SD card that is inserted in the SD card slot. Do not eject the SD card, as doing so may deactivate the navigation system. 7 NOTICE NAVIGATION SYSTEM ● Do not edit or delete the map data on the SD card, as doing so may deactivate the navigation system. INFORMATION ● microSDHC Logo is a trademark of SD3C,LLC. 259 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 260

    6. TIPS FOR THE NAVIGATION SYSTEM 260 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 261

    8 1 Entune App Suite 2 1 Entune App Suite OVERVIEW 3 1. Entune App Suite SERVICE ...... 262 BEFORE USING THE FUNCTION ...... 264 4 PREPARATION BEFORE USING Entune App Suite .............................. 265 5 2 Entune App Suite OPERATION 6 1. Entune App Suite ....................... 267 USING Entune App Suite..................... 267 LINKING Entune App Suite AND NAVIGATION FUNCTION................. 271 Entune App Suite KEYWORD OPERATION ..................................... 272 3 SETUP 1. Entune App Suite SETTINGS .... 274 SCREEN FOR Entune App Suite SETTINGS ........................................ 274 261 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 7 8 ...
  • Page 262

    1. Entune App Suite OVERVIEW 1. Entune App Suite SERVICE* Entune App Suite is a service that enables downloadable applications to be displayed on and operated from the screen. Before Entune App Suite can be used, a few actions need to be performed first. (P.265) *: Entune App Suite is available in the contiguous United States, D.C. and Alaska. 262 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 263

    1. Entune App Suite OVERVIEW No. Name Function Content provider Provides content to the system via a cellular phone. Application server Provides downloadable application to the system via a cellular phone. Cellular phone* Using the Entune App Suite application, communication is relayed between the system, the application server and the contents provider. Applications Downloaded Entune App Suite applications provide access to audio/visual content from a content provider when connected via a compatible phone with a data connection. Entune App Suite Contents received, via a cellular phone, from the contents provider servers are displayed on the screen. The system is equipped with an application player to run applications. *: For known compatible phones, refer to http://www.toyota.com/entune/. INFORMATION ● The actual service availability is dependent on the network condition. 8 Entune App Suite 263 PRIUS v_Navi_OM47895U_(U) 14.09.24 ...
  • Page 264

    1. Entune App Suite OVERVIEW BEFORE USING THE FUNCTION SUBSCRIPTION  User registration is required to start using the Entune App Suite service.  Entune App suite does not require an activation fee or monthly recurring fees.  Services requiring a separate contract can also be used.* *: For details, refer to http://www.toyota.com/entune/ or call 1-800-331-4331. AVAILABILITY OF SERVICE INITIALIZING PERSONAL DATA The personal data used in applications can be removed from the system. (P.62)  The following personal data can be deleted from the system and returned to their default settings: • Downloaded applications • Downloaded application content INFORMATION ● Once initialized, data will be erased from the system. Pay close attention when initializing the data.  Entune App Suite is available in the contiguous United States, D.C. and Alaska. INFORMATION ● When using Entune App Suite, depending on the details of your cellular phone contract, d ...
  • Page 265

    1. Entune App Suite OVERVIEW PREPARATION BEFORE USING Entune App Suite USER REGISTRATION 1 Perform user registration at http://www.toyota.com/entune/. SETUP REQUIRED TO USE Entune App Suite Perform the following actions. 1 User registration 2 Download the Entune App Suite application to your cellular phone. 3 Register the cellular phone to the system. 4 Download Entune App Suite applications to the system. 8 In order to use Entune App Suite, the following actions must first be performed: Entune App Suite  User registration with a service contract (P.265)  Download the Entune App Suite application onto your cellular phone, and login to the application. (P.266)  Register the cellular phone that the Entune App Suite application was downloaded to with the system. (P.266)  Register a Bluetooth® phone with the hands-free system. (P.44)  Download Entune App Suite applications to the system. (P.268) 265 PRIUS v_Navi_ ...
  • Page 266

    1. Entune App Suite OVERVIEW REGISTERING THE Entune App Suite APPLICATION 1 Download the Entune App Suite application to your cellular phone. 2 Run the Entune App Suite application on your cellular phone. 3 Enter the information required into the Entune App Suite application. Login to the application. INFORMATION ● Applications can only be used when the Entune App Suite application has been downloaded to your cellular phone and the application is running. ● Entune App Suite operational procedures can also be confirmed by visiting http://www.toyota.com/entune/. ● In order to use applications, it is necessary to run the Entune App Suite application on your cellular phone. ● If an iPhone is connected via Bluetooth® and USB at the same time, system operation may become unstable. For known phone compatibility information, refer to http://www.toyota.com/entune/. ● If an Entune App Suite application is used while iPod audio is being played back, syste ...
  • Page 267

    2. Entune App Suite OPERATION 1. Entune App Suite USING Entune App Suite 2 Select the desired application button. Entune App Suite is a service that enables the usable contents of a cellular phone to be displayed on and operated from the screen. Before Entune App Suite can be used, a few actions need to be performed first. (P.265) For details about the function and service of each application, refer to http://www.toyota.com/entune/. 1 Press the “APPS” button. No. Function Page Select to activate an application.  Select to update the application. 268 Select to reorder the applications. 269 8 Entune App Suite 267 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 268

    2. Entune App Suite OPERATION UPDATING an application 3 Check that downloading is completed. When Entune App Suite is activated, an application may need to be updated. By updating, an application can be kept to the latest version. When updating the application, it is necessary to download the updated data and install it. ■DOWNLOADING THE UPDATED DATA If an update is available, “Update” can be selected. 1 Select “Update”. No. Function Select to install the update later. The screen will return to the last displayed screen. Installing the updated data later: P.269 Select to display detailed information about the updated data. Select to install the updated data. Follow the steps “INSTALLING THE UPDATED DATA” from “STEP 2”. (P.269) INFORMATION 2 Check that downloading is started. ● Application download time may vary based on the speed of the cellular network. ● Application download can be resumed after turning off and back on. ● Fut ...
  • Page 269

    2. Entune App Suite OPERATION ■INSTALLING THE UPDATED DATA After the downloading is complete, “Update” will be changed to “Install”. 1 2 Select “Install”. Select “Continue”. “Later”: Select to postpone the installation of the updated data and go back to the previous screen. 3 Check that installing is started. “Install in Background”: Select to operate other function while installing. 4 REORDERING THE APPLICATIONS Order of the applications can be changed. 1 2 Display the “Apps” screen. (P.267) 3 Select the desired application to be moved. 4 Select or to move the application, and select “OK”. Select “Reorder”. 8 Entune App Suite Select “OK” after the installing is complete. INFORMATION ● Entune App Suite function cannot be operated while installing. 269 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 270

    2. Entune App Suite OPERATION IF A MESSAGE APPEARS ON THE SCREEN When problems occur starting up the application player, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. Message Display conditions Corrective action “This feature is unavailable during an emergency call.” Safety Connect is being implemented. After Safety Connect is finished, perform the operation again. “This feature is unavailable while transferring contacts.” Contacts are being transferred manually from the phonebook. When the transfer of contacts is complete, perform the operation. “Unable to connect to a Bluetooth* phone. For troubleshooting assistance, please visit toyota.com.” The cellular phone cannot be connected. Refer to http:// www.toyota.com/entune/ to confirm if the phone is compatible or not. “This feature is unavailable during a handsfree call.” A hands-free progress. ...
  • Page 271

    2. Entune App Suite OPERATION SETTING A DESTINATION USING Entune App Suite LINKING Entune App Suite AND NAVIGATION FUNCTION The system can set a destination and make a hands-free call via Entune App Suite. For details about the function and service of each application, refer to http://www.toyota.com/entune/. 1 1 Display the “Web Search” screen. (P.271) 2 Select the desired application button to search. 3 Enter a search term, and select “GO”. 4 5 Select “Map”. Select “Go to ”. Select “Navigation”. 8 Select “Dest.”. Select “Web Search”. 6 Entune App Suite 2 3 4 5 Press the “APPS” button. Locations that were searched using Entune App Suite can be set as a destination. Select “OK” to start guidance. Check that the “Web Search” screen is displayed.  For the operation of the route guidance screen and the function of each screen button: P.219 271 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 272

    2. Entune App Suite OPERATION MAKING A PHONE CALL USING Entune App Suite Phone calls can be made to locations which were searched using Entune App Suite. 1 Display the “Web Search” screen. (P.271) 2 Select the desired application button to search. 3 Enter a search term, and select “GO”. 4 5 Select “Call”. Information can be entered to an application by the software keyboard or voice recognition. For details about the function and service of each application, refer to http://www.toyota.com/entune/.  The keyboard layout can be changed. (P.57) USING THE SOFTWARE KEYBOARD Select “Yes”. “Cancel”: Select to cancel making a phone call. 6 Entune App Suite KEYWORD OPERATION Check that the “Call” screen is displayed.  For phone operation and the function of each screen button: P.160 1 2 Display the “Apps” screen. (P.267) 3 4 Select the character input space. Select the desired application button. Enter a ...
  • Page 273

    2. Entune App Suite OPERATION 5 Entering characters will be reflected on the character input space.  For details on operating the keyboard: P.38 ENTERING A KEYWORD USING THE VOICE RECOGNITION FUNCTION 1 2 Display the “Apps” screen. (P.267) 3 4 Press the talk switch. (P.134) Select the desired application button. 8 Entune App Suite When this screen is displayed, say the desired keyword.  Completion of saying the keyword will be detected automatically. 5 Search results will be displayed on the screen. 273 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 274

    3. SETUP 1. Entune App Suite SETTINGS Settings are available for Entune App Suite. 1 SCREEN FOR Entune App Suite SETTINGS Press the “APPS” button. No. 2 3 4 5 Select “Setup”. Select “Entune”. Function Select to set the voice guidance volume. Select to set the pop up reminder for cellular phone data usage. (P.275) Select the items to be set. Select “OK”. Select to reset all setup items. 274 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 275

    3. SETUP PHONE DATA PLAN POP-UP SETTINGS The phone data plan pop-up can be set after an App Suite application is installed. 1 Display the “Entune Settings” screen. (P.274) 2 3 Select “Phone Data Plan Pop-Up”. 4 Select “OK”. Check the desired function to be operated. 8 Entune App Suite 275 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 276

    3. SETUP 276 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 277

    1 INDEX 2 3 4 5 6 7 8 277 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 278

    ALPHABETICAL INDEX ALPHABETICAL INDEX A C AM/FM radio ............................................. 78 Calling on the Bluetooth® phone.............153 Available HD radio™ technology........... 85 By call history ......................................154 Caching a radio program....................... 82 By contacts list.....................................155 Overview ............................................... 78 By dial pad...........................................157 Presetting a station................................ 81 By favorites list ....................................154 Radio broadcast data system................ 83 By “Home” screen................................158 Selecting a station from the list ............. 81 By off hook switch................................157 Traffic announcement (FM radio) .......... 84 Capacitive touch switches.........................34 Troubleshooting guide....................... ...
  • Page 279

    E F Editing route............................................ 229 Function index........................................... 28 Adding destinations............................. 230 Deleting destinations........................... 230 G Detour setting...................................... 232 General settings........................................ 57 Reordering destinations ...................... 230 General settings screen ........................ 57 Selecting route type ............................ 231 GPS (Global positioning system) ............ 255 Setting route preferences.................... 231 Limitations of the navigation system ............................................. 255 Starting from adjacent road................. 233 Entering letters and numbers/list screen operation ............................................... 38 H Entering letters and numbers ................ 38 Home screen..................................... ...
  • Page 280

    ALPHABETICAL INDEX M O Maintenance ............................................. 65 Operating information..............................122 Map database version and covered area ....................................... 258 CD player and disc ..............................123 About the map data ............................. 259 File information ....................................126 Map information................................... 258 iPod .....................................................125 Map screen information .......................... 200 Radio ...................................................122 Displaying information about the icon where the cursor is set..................... 202 Displaying map information .................200 Standard map icons ............................ 203 Error messages ...................................130 Terms ..................................................129 Operation flow: Guiding the route . ...
  • Page 281

    R S Radio operation ........................................ 78 Screen adjustment .................................... 41 Receiving on the Bluetooth® phone........ 159 Search operation..................................... 209 Incoming calls ..................................... 159 Searching by address.......................... 211 Receiving weather information ............... 144 Searching by address book................. 215 Displaying weather information ........... 144 Searching by coordinates.................... 218 Registering home...................................... 22 Searching by emergency..................... 216 Registering preset destinations ................ 24 Searching by intersection and freeway ............................................ 216 Registering/connecting Bluetooth® device.................................................... 44 Searching by map ............................... 218 Certification ......... ...
  • Page 282

    ALPHABETICAL INDEX Some basics ..................................... 71, 149 About the contacts in the contact list... 152 Audio screen adjustment....................... 76 Disc slot................................................. 73 Registering/connecting a Bluetooth® phone............................................... 149 Selecting an audio source ..................... 72 Sound settings....................................... 74 U USB memory.............................................99 Overview................................................99 Playing a USB audio............................102 Useful information ...................................144 V Turning the system on and off............... 71 Voice command system ..................133, 134 USB/AUX port ....................................... 74 Using the voice command system.......134 Using the phone switch/microphone ... 150 Voice command system operation ......135 Voice command syste ...
  • Page 283

    283 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 284

    Map database information and updates 284 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 285

    285 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 286

    286 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 287

    287 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 288

    288 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 289

    289 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 290

    290 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 291

    Certain business data provided by Infogroup © 2012, All Rights Reserved. 291 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 292

    Certification  Gracenote, the Gracenote logo and logotype, “Powered by Gracenote”, MusicID, Playlist Plus and MediaVOCS are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries 292 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 293

    293 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...
  • Page 294

    For U.S. owners 294 PRIUS v_Navi_OM47895U_(U) 14.09.24 19:41 ...



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota Prius V 2015 Navigation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota Prius V 2015 Navigation in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota Prius V 2015 Navigation

Toyota Prius V 2015 Navigation User Manual - French - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info