485652
49
Zoom out
Zoom in
Previous page
1/53
Next page
96
97
Others
Trouble indications
The indicator illuminates and a beep sounds to inform you of internal abnormalities.
No power
Problem with projector
Unplug the power cord, and contact your dealer.
Lamp went out during use, or won’t come on
Lamp temperature is high so that it is difficult to turn on, the
lifetime of the lamp has ended or the projector is malfunctioning.
Unplug the power cord and wait for a short while, then turn the
power back on.
If a lamp burns out, replace it with a new one.
Power went out during use
Internal overheating, or the outside temperature is too high.
Make sure the projector is placed so that the air intake and
exhaust are not blocked.
Unplug the power cord and wait for a short while, then turn the
power back on.
The icon will appear before the power goes out.
Power went out during use
Problem with internal cooling fan.
Unplug the power cord, and contact your dealer.
The icon will appear before the power goes out.
Power went out during use, or power won’t come on
The lamp cover is not properly attached.
Unplug the power cord, and reattach the lamp cover.
p.92
Power went out during use
Problem inside the projector.
Unplug the power cord and wait for a short while, then turn the
power back on.
If the above action does not clear the problem, unplug the power
cord, and contact your dealer.
The icon will appear before the power goes out.
Note
After there is an abnormal indication, the abnormal status remains until the power cord
is unplugged.
Others
(OFF)
(Red
flashing)
(Red lit)
(Red lit)
(Red lit)
or
(Red
flashing)
(Red lit)
(Green
flashing)
(Red lit)
(Red lit)
(Red lit)
(Orange
flashing)
(Orange lit)
or
(Orange
flashing)
If you think something is wrong, check the followings before contacting customer service.
Please see Trouble indications
p.96
as well.
If This Happens Check
No power Is the power cord plugged in? Is it connected to the projector?
Is the outer lamp cover attached properly?
p.92
Power goes out
during use
Is the ambient temperature high?
p.96
Is the air intake or air exhaust blocked?
p.96
No picture Is the input source selected correctly? (When [Auto input search]
is [Off])
p.42
Is the mute function on?
p.33
Is the brightness setting minimized?
p.37
Are the connections set up correctly?
p.24
Are all the connected devices functioning properly?
No audio
Is the mute function on?
p.33
Is the volume setting minimized?
p.29
Are the connections set up correctly?
p.24
Are all the connected devices functioning properly?
Picture not
displayed
correctly
Is the input signal supported by the projector?
p.
100
p.
101
Is there something generating an abnormal video signal, for
instance the video tape?
Picture blurred
Part of picture
out of focus
Is the lens dirty?
p.95
Is the lens focus adjusted optimally?
p.29
Is the projection distance within the projector’s supported range?
p.22
p.23
Is the projector’s screen placement angle tilted too far?
p.29
Are the sharpness or sampling phase adjustments off?
p.37
p.38
Image is dark
Are the brightness or contrast adjustments off?
p.37
Is the lamp nearing the end of its service life?
p.45
Is the RGB input range set properly?
p.37
Colors too light
Bad shading
Are the color, R-level, G-level, or B-level adjustments off?
p.37
Is the screen dirty?
Is the blackboard mode set properly?
p.39
Is the lamp nearing the end of its service life?
p.45
Control panel key
doesn’t work
Is the key lock function on?
p.43
Troubleshooting
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-WX200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-WX200 in the language / languages: English as an attachment in your email.

The manual is 13,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info