214450
46
Zoom out
Zoom in
Previous page
1/47
Next page
90 91
Others
CONTROL terminal
Pin assignment
7
6
8
5
4
3
2
1
Signal Name
RXD
CTS
DSR
GND
RTS
N.C
TXD
GND
Pin No.
1
2
3
4
5
6
7
8
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
Signal ground
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended
ACK (06h) ESC (1Bh) ... Aborted
No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
Main Commands
Item Command
Power on PON
Power off POF
Icon display on MO0
Icon display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Note
Contact your dealer for control cable and other commands.
Specifications (Continued)
Pin assignment of DVI-I terminal
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin description
T.M.D.S. data 2 –
T.M.D.S. data 2 +
T.M.D.S. data 2/4 shielded
T.M.D.S. data 4 – (N.C)
T.M.D.S. data 4 + (N.C)
DDC clock
DDC data
Analog vertical sync signal
T.M.D.S. data 1 –
T.M.D.S. data 1 +
T.M.D.S. data 1/3 shielded
T.M.D.S. data 3 – (N.C)
T.M.D.S. data 3 + (N.C)
+5V power source
GND(+5V, H Sync & V Sync)
Pin description
Hot plug detection
T.M.D.S. data 0 –
T.M.D.S. data 0 +
T.M.D.S. data 0/5 shielded
T.M.D.S. data 5 – (N.C)
T.M.D.S. data 5 + (N.C)
T.M.D.S. clock shielded
T.M.D.S. clock +
T.M.D.S. clock –
Analog video signal (R / P
R
)
Analog video signal (G / Y)
Analog video signal (B / P
B
)
Analog horizontal sync signal
Analog GND(R/P
R
,G/Y,B/P
B
)
Pin No.
16
17
18
19
20
21
22
23
24
C1
C2
C3
C4
C5
COMPUTER IN 1
C5
C3 24C4
C1C2
8
1
16
17 9
Analog input signal
Analog RGB input
RGB signals: 0.7V (p-p) 75
Horizontal sync signal
: TTL level (Pos/neg polarity)
Ver tical sync signal: TTL level (Pos/neg polarity)
Y/P
B/PR input
Y signal: 1.0V (p-p) 75
P
B/PR signals: 0.7V (p-p) 75
DVI digital & analog connector
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw300 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info