465047
40
Zoom out
Zoom in
Previous page
1/84
Next page
40
EN
DVC to HDD / DVD Dubbing
Before recording from DVC, see page 19 for connection
instructions. (See page 75 for DVC to VCR Dubbing.)
If you want to record to the HDD, press [HDD] first.
If you want to record to a disc, press [DVD] first.
1 Press [INPUT SELECT F] repeatedly to select
the external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
2 Press [REC MODE] to select a recording mode.
(See page 28.)
3 Press [DISPLAY].
4 With “Control” highlighted, press [ENTER\OK]
to display the available devices to control with
the remote control of this unit. Select “DVC”
using [K \ L], then press [ENTER\OK].
e.g.) DVC to DVD dubbing
Now you can operate your DVC with the remote control of
this unit.
5 Press [PLAY B] to start playing back the DVC,
and find where you want to start dubbing.
Press [STOP C] when it comes to the desired
start point.
6 Select “Start Rec” using [K \ L], then press
[ENTER\OK].
The dubbing will start.
1) Select “Control” using [K \ L], then press
[ENTER\OK].
2) Select “HDD” / “DVD” using [K \ L] (whichever the
recording component you are using), then press
[ENTER\OK].
3) Press [STOP C].
Note
The tape will rewind a few seconds when you press
[ENTER\OK] at step
6 so that the dubbing starts exactly
where you press [PAUSE F] instead of [STOP C] at step
5.
The unit does not send out the output signal to DVC.
For the proper operation, connect DVC to the unit directly.
Do not connect this unit and DVC via any other unit.
Do not connect more than one DVC.
The unit can only accept DVC. Other DV device such as
cable/satellite box or D-VHS recorder cannot be recognised.
If no video signal is detected from the DVC during DVC to
HDD or DVD dubbing, the recording will be paused and “I
will flash on the TV screen. The recording will resume when
the unit detects the video signal again.
When the DVC is in camera mode, refer to “Guide to DV and
On-Screen Display” on page 39.
Date / time and cassette memory data will not be recorded.
Pictures with a copy-guard signal cannot be recorded.
A DV terminal is a terminal that can use the transmission
mode conforming to the IEEE 1394 standards called
“Fire Wire”. It serves as the interface that connects the PC
and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices
with little degradation.
You cannot dub from DVC to both HDD and DVD at the
same time.
Information on Dubbing
You can copy an HDD / DVD disc to a videotape or copy a
videotape to an HDD / DVD disc. This function will be possible
only if the DVD or the videotape is not copy protected.
Before dubbing, prepare for the recording on the DVDs or the
videotape. See pages 28 to 29 (HDD / DVD) or page 74
(VCR).
Difference between “Copy” and “Move”:
Preparing for DV dubbing (DVC to HDD):
Make sure your DVC is in video mode.
Preparing for DV dubbing (DVC to DVD):
Insert a recordable DVD.
Make sure your DVC is in video mode.
HDD
HDD
HDD
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DVD+RW
DVD+RW
DVD+RW DVD+R
DVD+R
DVD+R
AB-1234
0:00:00
DV
AB-1234
0:00:00
DV
1/ 1 1/ 1
DVD SP 2:00
-
RW VR ORG
T C
DV Audio Stereo1
Start Rec
Control DVD
To stop dubbing:
Copy : After dubbing the programme, the original
programme will remain.
Move: After dubbing the programme, the original
programme will not remain.
E3TK2BD_EN.book Page 40 Thursday, April 16, 2009 12:00 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RDXV59 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RDXV59 in the language / languages: English as an attachment in your email.

The manual is 11,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info