465047
33
Zoom out
Zoom in
Previous page
1/84
Next page
33
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions
Basic Setup /
TV View Operation
When the unit reaches the specified time, it will be
turned off automatically.
To change the recording length during One-touch Timer
Recording, press [REC I] repeatedly until the desired
length appears.
To cancel One-touch Timer Recording within the
specified time, press [STOP C].
8 Press [STOP C] to stop the recording.
This operation may take a few moments to complete.
Note
You can change the channel while in the REC pause mode.
Recording continues until the disc is full (as for HDD, 12
hours after the recording starts) or you stop the recording.
You cannot change the recording mode in the REC or REC
pause mode.
Even if the broadcasting you are recording is in the SECAM
system, this unit automatically converts it to the PAL system
when recording.
You can play back a title on one component while making a
recording on the other component. To do so, simply select
the component (HDD or DVD) you want to use for the
playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.
If playback and recording are operated in each component
(HDD or DVD) at the same time, select the component you
want to operate first, and then press [PAUSE F] or
[STOP C].
NTSC recording is prohibited in this unit.
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
The remaining recording time will be displayed on the front
panel display during One-touch Timer Recording.
Unlike the timer recording, you can perform the following
operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be
cancelled.)
-Use [REC I] or [STOP C] on the remote control.
You cannot use the pause function during One-touch Timer
Recording.
The unit will be turned off automatically under the following
conditions.
- No space remains on the disc.
- If a power failure occurs.
Timer Recording
You can set the unit to record up to 36 programmes, up to a
month in advance. Daily or weekly programme recordings are
also available.
Be sure to set the clock before entering a timer
programming.
Insert a recordable disc.
1 In stop mode, press [TIMER PROG.].
“Timer Programming” list will appear.
2 Select “New Programme” using [K \ L], then
press [ENTER\OK].
If there are 6 programmes or more, use
[SKIP H \ G] to turn the page.
3 Enter the date using [K \ L], then press [B].
Each time you press [L] at the current date, the timer
recording date will change as follows.
e.g., 1st January
Analogue channel is indicated as “ATV”.
4 Enter the time to start and to end using [K \ L],
then press [B].
DVB ANALOG
HDD
HDD
HDD
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DVD+RW
DVD+RW
DVD+RW DVD+R
DVD+R
DVD+R
1/1
03/120:00
06/12
07/12
7:00
9:00
9:00
9:30
DVB 18
DVB 190
Timer Programming
Date Start
End
CH
STTL
PDC
THU
New Programme
01/01
Daily
M-F (Mon.-Fri.)
W-SAT
W-FRI
W-SUN
31/01
1/1
DVB 125
OFF
07/12
XP 1:00
XP
- - : - -
- - : - -
0:00 03/12
Timer Programming
Skip
CH
Date
REC To
HDD
Mode
Start
STTL
OFF
End
THU
E3TK2BD_EN.book Page 33 Thursday, April 16, 2009 12:00 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RDXV59 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RDXV59 in the language / languages: English as an attachment in your email.

The manual is 11,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info