Manual Toshiba RBC-AMS41E (page 20 of 22) (English)

481594

Zoom out

Zoom in

1/22

Selecting the remote controller functions

• Change the settings of the remote controller functions

as required by taking the steps below.

How to change the remote controller functions

1 While operation is shut down, push the button

(43) and button (48) together for at least 4

seconds.

• The numeric displays and display blink,

and the fixed louvers display lights.

2 Push the TEMP and buttons (49).

• Repeatedly push the buttons until the setting to be

changed blinks on the display.

3 Push the TIME and buttons (40).

• Repeatedly push the buttons until the setting to be

changed blinks on the display.

4 Push the button (42). Then push the button

(43) to return to the original screen.

• When the button (42) is pushed, the numeric

displays and display stop blinking and

light up, and when the button (43) is pushed

again, they go off.

Items to be set

• 24-hour/12-hour display setting <code No.10>

– The 24-hour display or 12-hour (AM/PM) display

can be selected for the clock which is displayed on

the remote controller.

– This item’s selection is also reflected on the clock

displayed on the clock setting screen and program

input screen.

• Restriction on button operations <code No.12>

This item sets the range of the restriction placed on

the button operations which can be applied while

scheduled operations are being performed.

Setting: 0000 (factory setting)

Code No.12

O: Can be operated.

X: Cannot be operated.

• Display/non-display of clock <code no.13>

This item selects and sets whether the day of the week

and clock time are to be displayed.

Setting: 0000 (factory setting)

Code No.13

O: Display X: No display

• Selection of operation when power is restored after a

power outage <code No.14>

This item selects the operation to be performed when

power is restored after a power outage occurred

during a scheduled operation.

0000: No operations are performed when the power is

restored, and the scheduled operation is resumed as

soon as the program time is reached after the power

has been restored. (When the power is restored, the

scheduled operation is based on the operation of the

indoor units.)

0001: If there was a programmed operation during the

power outage, that operation is performed when the

program is resumed. If there is no programmed

operation or if the “Continue xx” setting is in place, the

operation prior to the power outage is resumed.

Selecting the functions using the DIP

switches of the remote controller

• The following functions can be selected using the DIP

switches on the remote controller’s circuit board.

Setting procedure

• Open the back cover of the remote controller, and

select the functions using the DIP switches located at

the bottom left of the circuit board.

• After establishing the settings, turn the ground fault

interrupter off and then back on.

Setting items

• Remote controller header/follower setting: Bit 1

When operating the air conditioner using two remote

controllers, set one of the controls to be the follower.

* Set the remote controller used as the schedule timer

to be the header.

• Operation function setting: Bit 2

One of the following three operation functions can be

selected and set.

1.Scheduled operation function

2.Timer operation function

3.No scheduled or timer operation function

Setting Description

0000:

0001:

24-hour display (factory setting)

12-hour (AM/PM) display

Setting [ON/OFF] [MODE] [TEMP.]

0000 O O O

0001 X O X

0002 X X X

0003 O X X

0004 O X O

Setting

Scheduled operation

underway

Scheduled operation

in standby

Air

conditioner

now

operating

Air

conditioner

now shut

down

Air

conditioner

now

operating

Air

conditioner

now shut

down

0000 O O O O

0001 X X X X

0002 O O X X

0003 O X X X

0004 O O O X

0005 O X O X

ERROR CODE E-D4 WILL NO OPERATE ON HEAT...COULD IT BE FILTER FAULT Submitted on 14-5-2022 at 00:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RBC-AMS41E in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba RBC-AMS41E

Toshiba RBC-AMS41E Quick start guide - English - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba RBC-AMS41E Manual

Product: