4) Connect other two switch wires to timer red wire and timer black
wire, choose either one for now.
5) In back of electric box are white wires twisted together and
covered with wire nut. Connect timer white wire to these wires.
6) If box does not have white wires described in step 5, then
connect timer white wire to bare ground wire.
7) Turn power on. Move slide switch to ON.
8) If light turns ON, then timer is wired correctly.
9) If lights do not turn ON, then reverse timer red wire and timer
black wire.
Move tripper pins out
to set on-off times
Move switch to
'Timer' for timed
operation
Move switch to ON or OFF to
operate timer as ordinary switch
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Tork 701A at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Tork 701A in the language / languages: English as an attachment in your email.
The manual is 3,23 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
