719680

Topcom KS-4249 Manual

6
Zoom out
Zoom in
Previous page
1/62
Next page
Babytalker 3500 SEDS
6
®
to confirm your selection. Use the On/Off
button to go back one step.
– Enter the VOX menu to turn the VOX menu on or off.
– Enter the sensitivity submenu to set the sensitivity of the
VOX function to low, medium or high.
– Enter the sleep submenu, to set the sleeptime to 10, 30,
60 or 90 seconds. The monitor will automatically go to
VOX mode after the selected time period.
10.13 Night vision
The camera has 6 high-intensity LED’s for picking up clear images
in the dark. When the build in light sensor measures the
ambient light level as low, the LED’s will automatically activate.
10.14 Registering the parent unit with the baby unit
or registering a new camera.
Up to 4 baby units can be registered to one parent unit.
To re-register your baby unit, or to register a new baby unit, follow
the procedure below:
– Select the camera with the up and down
to enter the pairing
– to start
– once
(at the back of the camera).
– If registration is completed, camera video appears on
LCD screen and return to normal mode. Baby unit will
return to normal mode too.
– If the registration time is expired or registration is failed,
“Out of Range” appears on LCD.
NOTE: If a particular channel had been registered already,
register this particular channel again will over-write the old
registration.
10.15 Selecting the camera
When more than 1 camera is registered.
– Enter the camera menu. The camera numbers are
displayed.
– Select the camera with the up and down
keys. Choose a camera by pressing the menu
button .
10.16 Settings menu
10.17 Pan and tilt (only for the KS-4249)
– Press and hold the menu button until arrows appear on
the display.
– You can now pan and tilt the the camera with arrow
buttons.
– If you don’t press the arrow buttons for 30 seconds, the
arrows will dissappear from the display, and the controls
will revert to normal.
11 Cleaning and maintenance
This section contains important instructions for cleaning and
maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent
damage to the equipment due to improper maintenance.
11.1 Safety Instructions
11.2 Cleaning
– Clean the equipment with a soft, slightly dampened
cloth.
– Clean soiled connectors and contacts with a soft brush.
– Clean the battery contacts and battery compartment with
a dry, lint-free cloth.
– If the equipment gets wet, switch it off and remove the
batteries immediately. Wipe the battery compartment dry
with a soft cloth in order to minimize potential water
damage. Leave the battery compartment open until it is
completely dry. Do not use the equipment before it is
completely dry.
11.3 Maintenance
– Check the batteries (regular or rechargeable) in the
equipment regularly and replace them when necessary.
– Check the connectors and cables for defects.
12 Troubleshooting
This section provides important instructions for localising and
correcting problems.
Follow these instructions in order to avoid hazards and damage.
12.1 Safety Instructions
12.2 Problem causes and solutions
The following table is intended to help you localise and solve
minor problems.
The image changes automatically into black and
white mode under the night vision mode.
button
22
9
– Press the menu button
22
to enter the main menu.
Use the arrow keys to highlight items, and use the menu
button
22
to confirm your selection. Us
e the On/Off
bu
tto
n to
go back one step.
15
16
keys. Press right 18
submenu.
Highlight “
pair’and press
th
e menu
button
22
pairing.
S
witch the
bab
y
unit ON. Press the pair button
9
15
16
22
– Go to the main menu with the menu button
22
and
enter
the settings menu. You can change several
settings in this menu.
– Set the language of your choice.
– Set the temperature unit to Fahrenheit or Celsius.
– Set the utility frequency to 50 or 60 Hertz, depending on
your region.
DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and
unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can
cause injuries (skin irritation) or damage to the equipment.
Wear safety gloves.
CAUTION
• Do not use cleaning products or solvents. They can
damage the case or seep into the equipment and
cause permanent damage.
CAUTION
• If you suspect that the equipment is damaged, always
have it checked by an expert before using it again.
DANGER
Risk of fatal injury due to electric shock!
• Unplug the power cable before attempting to correct a
problem.
CAUTION
Risk of hazard due to incorrect repairs
Incorrect repairs can expose users to serious hazards and
cause damage to the equipment.
• Never attempt to modify or repair the equipment.
• Always have repairs to equipment or cables performed
by a specialist or the service centre.
• If you suspect that the equipment is damaged (for
example, if it has fallen on the floor), have it checked
by a specialist before you use it again.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom KS-4249 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom KS-4249 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, All languages as an attachment in your email.

The manual is 28,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info