640724
4
Zoom out
Zoom in
Previous page
1/98
Next page
Babytalker 3500 SEDS
4
®
7.1 Baby unit components
See Figure on the fold-out page.
7.2 Parent unit components
See Figure on the fold-out page.
7.3 Display description
8Initial use
8.1 Package content
The equipment is supplied as standard with the following items:
8.2 Installing batteries in the baby unit
Turn the screw on the cover of
the battery compartment at
the back of the baby unit 90°
counter clockwise and remove
the battery compartment
cover.
Fit four AAA alkaline
cells (LR03) in the
battery compartment.
Ensure that the polarity is
correct.
Close the battery
compartment.
8.3 Connecting the baby unit to the AC mains
Insert the small plug of the
AC mains adapter in the
mains power connector of
the baby unit and plug
the AC mains adapter into a
mains connector (100~240
V - 50/60 Hz).
8.4 Installing the rechargeable battery pack in
the parent unit
Rotate the belt clip upward.
Open the battery compartment an place the Li-ion
battery pack
Carefully close the battery compartment and rotate the
belt clip back downwards.
8.5 Connecting the parent unit to the AC mains
Connect the adapter for the charging dock to the mains
(100~240 V - 50/60 Hz). Place the parent unit on the
charging dock.
1 On/off LED
2 Night light LED
3 Infrared LED for night
vision
4 On/off switch
5Lens
6 Microphone
7 Wall mounting cavity
8 Crib connector nut
9 Light sensor
10 Pair button
11 Speaker
12 Connector for AC mains
adapter
13 Room temperature sensor
14 Volume LED
15 Microphone
16 Increase volume /
Next menu item
17 Decrease volume /
Previous menu item
18 Music button
19 Camera button
20 2,4” (6,1cm) colour display
21 Link LED
22 Power on/off LED
23 Menu button
24 Push to Talk button
25 On/off button
26 Belt clip
27 Speaker
28 Charging dock
Out of range or no
connection
LCD display
brightness icon
Volume icon Temperature unit
icon
Melody icon Night light icon
- 1 baby unit
- 1 parent unit
- 2 AC mains adapters
- 1 user guide
- 1 Li-ion rechargeable battery pack
You can operate the baby unit with 4 AAA
cells (LR03; we recommend alkaline cells)
or the included AC mains adapter.
The baby unit cannot recharge batteries.
It is recommended to always leave the
batteries in the unit, even if you use the AC
mains adapter. The unit will automatically
switch to battery power in case of a mains
power interruption.
Do not turn the screw past the “OPEN” point.
A
B
C
O
P
E
N
90° MAX
OPEN
Never mix used cells with fresh cells.
CAUTION
The mains connector must be within easy reach so
you can quickly unplug the power cable in an
emergency.
Use only the supplied AC mains adapter (6 V DC /
800 mA).
CAUTION
Use only the supplied Li-ion battery pack in the parent
unit.
It takes around 10 hours to fully charge the
batteries.
12
26
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom KS-4240 BABYVIEWER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom KS-4240 BABYVIEWER in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 83,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info