483914
4
Zoom out
Zoom in
Previous page
1/66
Next page
4 Topcom Deskmaster 4100
Topcom Deskmaster 4100
6.2 Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
Press to enter the menu
Use / to select “
6(7&RG(
Press to enter the area code settings
Use / to change
Press to move to the next digit.
6.3 Set the LCD contrast
There are 8 levels of LCD contrast (0..7). Choose
the most convenient level.
Press to enter the menu
Use / to select “
6(7/FG
Press to enter the LCD contrast settings
Use / to select the level
Press to confirm
You can also access the LCD-contrast settings,
just by pressing the R/LCD key
6.4 Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
Press to enter the menu
Use / to select “SET 4 PcodE”
Press to enter the settings
Use / to change select the digit
Press to move to the next digit
6.5 Select PULSE or TONE dialling
By default, the telephone is set for Tone dialling
(DTMF). Some old lines require pulse dialling.
Press to enter the menu
Use / to select “
6(73W
Press to enter the Pulse/Tone settings
Use / to select ‘toNE’ or ‘PULSE’
Press to confirm
6.6 Set the flash time
The R/LCD-key (flash) is used for services like
“Call waiting” (if this service is provided by your
telephone company) or to transfer calls when the
telephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 100, 300,
600 and 1000 msec.
Press to enter the menu
Use / to select “SET 6 FLASH”
Press to enter the FLASH settings
Use / to select your flash-time
Press to confirm
6.7 Ringer volume
At the back panel of the telephone you find a
switch that can be set in three positions : off, low
and high.
Choose the most comfortable volume setting
6.8 Anti-dialling from parallel line
You can prevent that other telephones, connected
to your line, can make a call.
When this function is activated you will be alarmed
when someone tries to make a call with another
telephone connected to your line.
Press and hold # for three seconds
“SPI oFF” appears
Press # again to activate “SPI on”
Press to confirm
Follow the same procedure to deactivate this
function (“SPI oFF”)
4


Need help? Post your question in this forum.

Forumrules
1

Forum

topcom-deskmaster-4100---te-6601

Reset search

  • Hej jag köpte deskmaster4100 år 2017. Kan ni skicka mig bruksanvisning,den måste handlat bland alperna
    Jag har sökt i ett år och hittar du den.
    Submitted on 17-3-2021 at 17:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom DESKMASTER 4100 - TE 6601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom DESKMASTER 4100 - TE 6601 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info