484005
1
Zoom out
Zoom in
Previous page
1/2
Next page
Topcom KS-4241 - Babyviewer 4100 - Annex
UK - No communication - Registration of the parent unit on the baby unit.
In case there is no communication between parent- and baby unit, it is possible that the parent unit is not registratered on the baby unit.
Follow the next registration procedure to solve the problem.
1. Press and hold the power button of baby unit to switch the baby unit on.
2. Slide switch
on the parent unit to switch on ( I )
3. Press and hold the up buttons on both parent-
and baby unit at the same time.
4. The red LED
on the parent unit will blink, while the green LED on the baby unit green is also blinking.
5. Wait for few seconds to estalish the link. The registration procedure is confirmed when the green LED will light continuously.
ES - Sin comunicación – Registro de la unidad paterna en la unidad para bebés.
Si no se produce comunicación entre la unidad paterna y la del bebé, es posible que la unidad paterna no esté registrada en la unidad
del bebé. Siga este proceso de registro para solucionar el problema.
1. Presione y mantenga el botón en la unidad del bebé para encenderla.
2. Deslice el interruptor de la unidad paterna a (I).
3. Presione y mantenga los botones arriba de la unidad paterna
y la del bebé simultáneamente.
4. El LED rojo de la unidad paterna parpadeará, mientras el LED verde de la unidad del be también parpadea.
5. Espere unos segundos para que se establezca la conexión. El proceso de registro se confirmará cuando el LED verde quede
fijo.
NL - Geen communicatie – Registratie van de oudereenheid op de babyeenheid.
Indien er geen communicatie is tussen de ouder- en de babyeenheid, is het mogelijk dat de oudereenheid niet is geregistreerd op de
babyeenheid. Volg de volgende registratieprocedure op om het probleem op te lossen.
1. Druk op de power knop en houd deze knop ingedrukt om de babyeenheid in te schakelen.
2. Schuif aan de schakelaar
op de oudereenheid om deze in te schakelen (I).
3. Druk op de omhoog knoppen op zowel de oudereenheid
als de babyeenheid en houd deze tegelijk ingedrukt.
4. Het rode LED-lampje
op de oudereenheid zal gaan knipperen, net als het groene LED-lampje op de babyeenheid .
5. Wacht een aantal seconden tot de verbinding in stand is gebracht. De registratieprocedure is bevestigd als het groene LED-lampje
voortdurend brandt.
FR - Pas de communication - Inscription de l'unité parent sur l'unité bébé.
Au cas où la communication ne se fait pas entre l'unité parent et l'unité bébé, il est possible que l'unité parent ne soit pas inscrite sur l'unité
bébé. Suivez la procédure d'inscription suivante pour résoudre le problème.
1. Maintenez le bouton d'alimentation enfoncé sur l'unité bébé pour mettre l'unité bébé en marche.
2. Faites coulisser l'interrupteur
de l'unité parent pour la mettre en marche (I).
3. Maintenez enfoncés les boutons à la fois sur l'unité parent- et sur l'unité bébé au même moment.
4. La DEL rouge
sur l'unité parent clignotera et la DEL verte sur l'unité bébé se mettra également à clignoter.
5. Attendez quelques secondes que le lien soit établi. La procédure d'inscription est confirmée lorsque la DEL verte reste allumée.
VOX
1
2
3
4
5
6
7
8
9
10
13
14
15
16
A
1
0
17
18
19
20
21
22
23
24
25
26
29
30
31
28
27
B
12
11
+
-
1 x AAA
+
-
1 x AAA
+
-
1 x AAA
+ -
5
29
19
6
27
4
4
5
29
19
6
27
4
4
29
19
6
27
4
4
5
29
19
6
27
4
4
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Babyviewer 4100 - KS 4241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Babyviewer 4100 - KS 4241 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Topcom Babyviewer 4100 - KS 4241

Topcom Babyviewer 4100 - KS 4241 Additional guide - English - 1 pages

Topcom Babyviewer 4100 - KS 4241 User Manual - English - 2 pages

Topcom Babyviewer 4100 - KS 4241 Additional guide - German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info