737787
6
Zoom out
Zoom in
Previous page
1/7
Next page
EXERCISE COMPUTER INSTRUCTION MANUAL
FUNCTIONAL BUTTONS:
1.MODE
Select the window to be set.
Reset: hold for 3 seconds to reset all data.
2.UP/RECOVERY
Increase the blinking number, hold for quick increase.
Press it to enter/exit pulse recovery function when heat rate display
(IF HAVE PULSE FUNCTION)
3.DOWN
Decrease the blinking number , hold for quick decrease
4.RESET
During SET
, reset the value of the relevant display window.
Hold for 3 seconds to reset all data .
FUNCTION
Exercise time can be set, MAX 99 minutes, each press add or
minus 1 minute, countdown to zero, the
TIME will flash and beep for 10
seconds.
Count the cumulative distance from the exercise start to the end, KM means metric, MI means imperial.
Exercise distance can be set, MAX 99 KM/MI, each press add
or
minus 0.1, countdownto zero, the DIST
will flash and beep for
10 seconds.
The calorie value can be set, MAX 999, each press add or minus
1, countdown to zero, the CAL will flash and beep for 10 seconds.
1.
SPEED : Window A
displays
The current exercise speed during exercise.
2.TIME:
Window B displays
Count the cumulative time from the exercise start to the end, and it will
automatically stop timing if without exercise signal over 6 seconds.
3.DISTANCE: Window C displays
4.CALORIES: WindowD displays
Count the cumulative calories consumed from exercise start to the end.
5.PULSE: Window E displays (IF HAVE)
Show your current heart rate during exercise, pulse range: 40240BPM
The traget pulse value can be set ,range 40-240 BPM .each press add or
minus 1.Beep one time every 10 seconds when the
V
alue over the target heart rate
6.AUTO OFF
Without any exercise signal or operation over 4 minutes, the computer will turn off automatically and memorize the current data.
INSTALLATION
1.Take off the computer back’s battery cover, put 2pcs 1.5V AAA battery inside correctly
.
2.
Fix the computer on the front place of exercise machine by screw.
3.
Install the magnet and speed sensor on the related place of the exercise machine. Make sure the distance less than 10mm between the
magnet and sensor
.
4.
Connect the speed signal cable plug and the computer back’s signal plug. If with the
hand pulse, connect the hand pulse cable plug
and the computer back’s pulse signal plug.
5.Start exercise, and if the speed value changes, means the installation is correct. Or else check the installation of magnet and sensor
,
and also the plug connections between sensor and computer
.
OPERATION
1.RESET
In any displays, hold MODE or RESET button for 3 seconds to reset all the data.
2.SET THE TARGET PARAMETERS
When stop exercise , press MODE to choose the window to be set or reset, the corresponding window’s digit flash, press RESET
to
clear the value, and press UP or DOWN to set the flashing window’s value. Hold the button to quick increase
or
decrease.
Set the value as:TIME→DIST→CAL→PULSE.
3.PULSE RECOVER
Y (IF HAVE)
Wear the transmitter belt properly, or hold the hand pulse place, the computer will display your current heart rate.
When the pulse window has the display, stop exercise, press RECOVERY to enter the function of pulse recovery
. The display will show 1
minute countdown as well as your pulse rate, test your pulse until it counts down to zero. Then it will pop up your pulse recovery level
from F1 to F6, that is, from the fastest recovery to the slowest. The fastest recovery F1 shows the best, F6 means the slowest.
Press RECOVER
Y again to exit the pulse recovery function.
REPLACE BATTERY
When the display color fades, or with flash when operate buttons, means the battery has no enough power. Take off the battery cover
,
and use 2pcs new 1.5V
AAA UM-4 battery to replace the old battery.
A
B
C
D
E
DO WN
C
U
O
P
V
/
E
RE
RY
A
B
C
D
E
DOWN
UP/
TENSION
TIME
/500M
BMI
PULSE
SPEED
RPM
STOP
DIS.
BMR
RPM
CAL.
TEMP.
WATT
C
F
%
COUNT
KMPH
RE SE
T
MO DE
TENSION
TIME
/500M
BMI
PULSE
SPEED
RPM
STOP
DIS.
BMR
RPM
CAL.
TEMP.
WATT
C
F
%
COUNT
KMPH
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx Power Mag at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx Power Mag in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toorx Power Mag

Toorx Power Mag User Manual - German - 7 pages

Toorx Power Mag User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info