720267
5
Zoom out
Zoom in
Previous page
1/40
Next page
FT92N
V. 05 04/07/2018 5 ©Velleman nv
6. Starting the Gas Heater
After carefully unpacking the gas heater:
Remove the door at the back of the gas heater.
Connect the flexible hose to the gas input of the gas heater and to the pressure regulator.
Fix with the hose clamps and make sure the connections are airtight. Do not crimp the gas
hose.
Install the gas cylinder inside the gas heater and connect to the pressure regulator. Open
the pressure regulator and check for gas leaks by brushing soapy water on all the fittings
and connections of the gas circuit.
Re-install the door at the back of the gas heater.
For their safety, keep children away from all packaging such as cardboard boxes, foams, plastic
bags, etc.
Only install and replace the gas cylinder in a room void of flammable objects and substances.
This gas heater features a safety mechanism which will switch off the device in case of
insufficient ventilation or if the concentration of carbon dioxide (CO
2
) exceeds the legally-
stipulated maximum values.
It is normal if this safety mechanism is triggered in small and closed rooms.
If the pilot light dies out, sufficiently ventilate the room and wait a few minutes prior to
switching on the gas heater.
7. How to Switch On the Gas Heater
Prior to using the gas heater for the first time or after the gas heater has been stored for a
long time, we recommend, with the pressure regulator closed, repeatedly pressing the buttons
a few times.
The gas heater can be set to three heat positions: the maximum, the medium and the
minimum position. The ignition is generated by an electric spark.
Open the gas flow by turning the lever of the pressure regulator toward the marking.
Ignition of the Gas Heater
Fully press the button and turn in an anticlockwise direction.
Hold the button pressed for 20 seconds. Repeat this operation until the pilot light is lit. The
pilot light is located on the lower part of the protection grid (where the ignition sparks are
generated). Keep the button pressed for another 10 seconds after the pilot light is lit.
Repeat the steps above if the pilot light dies out when releasing the button.
position 1
position 2
start and max. heating
medium
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolland FT92N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolland FT92N in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info