Manual Toolland DT 20005 (page 14 of 16) (English, German, Dutch, French)

771265

Zoom out

Zoom in

1/16

DT 20005 English

www.toolland.eu 14

 Keep the trigger clean and free from

sediment and chemicals by regularly

flushing through after use.

 If necessary remove and clean the shuttle

in the trigger.

Outlet and dip tube

 To rewash the outlet or replace the dip

tube, unscrew the hose nut and pull the

outlet spigot and dip tube through the

outlet body.

Winter use

 Drain liquid from all parts after use to

prevent damage from freezing.

Annual Maintenance

 At least once a year thoroughly clean the

whole sprayer and apply silicone grease

to all moving parts.

 Test with water and if any washer or seal

has perished it must be replaced.

FAULT FINDING CHART

Fault

May be due

Remedy

Weak or no

spray

1.insufficient

pressure or

loss air.

2.obstruction

1.if insufficient

pressure check

maintenance

2.if obstruction

check

maintenance

Distorted

spray

Partial

blockage in

spindle or

nozzle

Check

maintenance

Leaks

1.build up of

sediment or

foreign matter

on internal

sealing

surfaces.

1.check

maintenance

and if

necessary

replace sealing

rings.

2.replace

sealing rings

Unit will not

function

Swelling of

sealing rings

or total

blockage

Check the

maintenance

Handle rises

Faulty non-

return valve

Check the

maintenance

GUARANTEE

Refer to the enclosed guarantee conditions

for the terms and conditions of guarantee.

ENVIRONMENT

Should your sprayer need replacement after

exceeded use, do not put it in the domestic

waste but dispose of it in an environmentally

safe way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolland DT 20005 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolland DT 20005 Manual

Product: