549750
3
Zoom out
Zoom in
Previous page
1/40
Next page
Your Tomy Movement Sensor Pad Monitor has been carefully designed to sit underneath the mattress of your cot or
Moses basket to detect all movements baby makes and to emit an alarm when no movement is detected after 20
seconds.
Every movement is accompanied by a soft click and an illuminated visual indicator. Should no movement be detected
on the Movement Sensor Pad for 20 seconds, a continual beep alarm will be activated.
Ideal for monitoring baby from the nursery, connect the Movement Sensor Pad to the Baby Unit as shown above,
your Parent Unit will emit an extended beep indicating connection; all movement monitoring has now transferred
through to your Parent Unit via the soft click and illuminated icon.
Fail Safe – In the unlikely event of loosing connection with the Baby Unit, your Parent Unit will again emit an
extended ‘beep’ at which time all movement monitoring and alarms will revert back to the Baby Unit.
Suited for when Baby is in the bedroom with you and you have no need for remote or audio monitoring. Connect the
Movement Sensor Pad as shown (above). Activate the Baby Unit by pressing and holding the icon, it shall
illuminate green and the button shall illuminate red. Movement monitoring shall commence.
Whilst monitoring this way, the soft clicks and alarm shall emit through the baby only (having no need for your
Parent Unit, at this stage). The Nightlight and Lullabies have also been designed to work independently, activate by
pressing the respective icons; .
When the times comes and you wish to use the full features of your monitor. Deactivate the Baby Unit and reactivate by
pressing and holding the button until it illuminates green then follow the ‘remote monitoring’ instructions (above).
For safety reasons the alarm volume can not be adjusted. The volume of the movement sensor clicks are independent
from the Parent Units audio monitoring volume and can be adjusted by sliding the switch on the underside of the Baby
Unit.
Testing
Before every use we recommend carrying out the following checks with the Pad in the cot or Moses basket. Firstly
tap the mattress, at which time your Parent or Baby Unit shall emit a soft click and the indicator shall ash
Green. Follow this by leaving the Pad to stand untouched for 20 seconds, then the alarm shall sound and the
indicator shall illuminate red. Simply deactivate the alarm by tapping the mattress again.
The Tomy Movement Sensor Pad sits underneath the mattress of your cot or Moses basket as shown (below).
Once you have chosen baby’s sleeping area, position the Movement Sensor Pad to lie directly underneath her torso.
IMPORTANT! The Movement Sensor Pad must rest on a completely at, rigid surface and must be placed with the
‘Tomylogo’ side facing up. Ensure that no bedding is positioned between the mattress and the Movement Sensor Pad.
For best performance we recommend covering the base of slatted based cots with a thin layer (6mm) of plywood to
ensure an even surface. Ensure any loose cable is wrapped and tied to avoid possible entanglement. From the cot,
run the cable along the oor ensuring it is kept out of baby’s reach; excess cable should be spooled around the cable
tidy.
PAD MONITORING
Pad Sensor
Pad Sensor
Movement Indicator
Pad Sensor
Movement Indicator
Movement Sensor Pad
Positioning the Sensor Pad
Keep cot sides & ends at
least 38cm (15 inches)
from adjacent bedroom
furniture
Mute (Visual Indisctaor ( ) & alarm only)
Low
High
Movement Click Volume Adjustment
Remote Monitoring
Local Monitoring (movement only)
Volume Adjustment
EN
The Movement Sensor Pad can be used remotely through your Parent Unit or locally as a standalone Movement
Monitor.
Pad Sensor Input
Pad Sensor
Volume Control
Pad Sensor
Volume Control
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomy TFM575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomy TFM575 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 35,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info