549759

Tomy TD300 Digital Manual

2
Zoom out
Zoom in
Previous page
1/33
Next page
Indications on the
Baby Unit
•••
••
Low Battery –
Parent Unit
Low Battery –
Baby Unit
•
Button will change from green
to ashing red.
Alarm tone on
Parent Unit
Alarm Meaning
Indications on the Parent Unit
• Button will change from green to
ashing red.
•
Button will change
from green to ashing red.
Loss of contact.
•
Button will change from solid
green to alternating ashing green
and red.
• Button will change from
solid green to alternating
ashing green and red.
(Continuous)
3 beeps
2 beeps
••••••••
Flashing
Green & Red
• GETTING TO KNOW YOUR MONITOR
PARENT UNIT
Sound Level Lights Display
Temperature Display
Movement Sensor Pad Display*
Volume Control Wheel
On/Off Button
Nightlight On/Off Button
Temperature Gauge
Microphone
Sound Activation Button
2-Way Talkback Button
Temperature Sensor
ON/OFF (& Pager) Button
Nightlight On/Off Button
BABY UNIT
• PARENT UNIT
Remove the battery compartment cover from the back of unit (N.B: this may already be supplied loose) and insert
the battery pack (supplied) correctly, connecting the plug with the socket. Replace the cover and screw rmly into
position, referring to the Quick Start Guide for pictorial reference.
Ensuring the power cable is correctly connected, plug your Parent Unit into the mains supply and charge for a full 6
hours. You can use your monitor while it is charging by following the ‘Set Up’ guide below.
Important! Your Parent Unit will not function without rst inserting the battery.
• BABY UNIT
For best performance we recommend that the Baby Unit is powered by your domestic mains supply using the power
adaptor supplied. Alternatively, you can use 4 x AA/LR6 batteries (not supplied) to make it fully portable. To insert the
batteries, unscrew the battery compartment cover on the underside of the unit using a at-head screwdriver. Insert the
batteries, making sure you match the ‘+’ and ‘-’ polarity symbols. Replace the cover and screw rmly into position.
Position the Baby Unit at least 1 metre away from your baby ensuring all parts are kept out of reach. Under no
circumstance should you place any parts of the monitor in or on a cot. For best performance we recommend that
the monitor is placed no further away than 3 metres from your baby.
GB GB
Belt Clip
Attachment
Microphone
Mains Cable Tidy
AC/Mains
Power Input
• SET UP
• POWER ON
Make sure both the Baby and Parent Units are plugged into the mains and/or have their batteries installed (see
above). The units should stand at least 1 metre apart.
Press and hold the
button on each unit for at least 2 seconds. Once activated, the buttons will glow.
• BABY AND PARENT UNIT CONNECTION
As each unit activates, watch for the Sound Level Lights Display on the Parent Unit as it scrolls from left to right and
right to left as the Parent and Baby Units auto-search and link to each other.
Once a connection is made between Baby and Parent Units, normal monitoring will start. The Sound Level Lights
Display reacts to sound: the louder the sound, the more lights illuminate.
• ALARM MODES
Identify the cause of audible alarm by using the following table; should you be unable to identify or rectify the cause
of the problem, please refer to the Simple Solution Guide within this booklet.
* See ‘Accessories’ section.
2 3
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomy TD300 Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomy TD300 Digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info