Manual Tomy TD 350 - Digital Plus (page 4 of 33) (English, German, Dutch, French, Italian, Spanish)

549762

Zoom out

Zoom in

1/33

• FAULT FINDING

GB GB

• SAFETY INFORMATION

The Tomy Baby Monitor is designed to help you monitor your child and is not a substitute for adult supervision.

This product is not a toy. Always keep electrically operated items and their cables out of reach of babies and younger

children. Under no circumstances should you place any part of your monitor in or on a cot.

Ensure all wiring is positioned safely so that children cannot become entangled and that no trip hazard is created.

Under no circumstances should the adaptors supplied with this monitor be used with any other equipment. No

other adaptors than those supplied should be used with your monitor. Be careful not to position the adaptor where

a child is likely to use it as a step. Putting weight on the adaptor while it is plugged in could damage the unit or

cause injury to your child. It is normal for chargers to become hot during use – take care when handling, allow

heat to disperse. DO NOT COVER. Disconnect charger if the product will not be used for several days. To prevent a

shock hazard, please disconnect from power supply before cleaning. The rechargeable battery within the Parent Unit

should be recycled. Do not dispose in normal waste. Do not attempt to dismantle any part of this product.

• BATTERY SAFETY

Removal and replacement of batteries should be carried out by an adult or under adult supervision. Take special

care to ensure batteries are inserted correctly, observing (+) and (-) polarity marks on battery and product. Do not

short circuit the contacts in the battery compartment or the battery terminals. Remove exhausted batteries from

product. Do not mix old (used) and new batteries or batteries of different types, e.g. rechargeable and alkaline or

batteries of different makes/brands. Dispose of exhausted batteries safely, and never dispose of batteries in a re.

Remove batteries from product after use or if storing for long periods. Only use batteries of the same or equivalent

type to those recommended.

Removal and recharging of rechargeable batteries should be carried out by an adult or under adult supervision.

If you are using rechargeable batteries within the Baby Unit, they must be removed from the monitor before

recharging. Do not attempt to recharge non-rechargeable batteries.

• SIMPLE SOLUTION GUIDE

Should your monitor not be operating as expected, the information listed below should be adequate to resolve your

problems; alternatively a more comprehensive guide can be found on our website: www.tomy.eu

• FREQUENTLY ASKED QUESTIONS

Q. Does my Parent Unit need to be switched on or off whilst charging?

A. Either, your Parent Unit will charge whilst switched on or off, however charging the unit whilst switched on will

allow you to monitor your baby whilst charging.

Q. I have measured the temperature of my baby’s room using another device and I get a different reading

than that of my monitor- why?

A. The temperature measuring device within your Tomy monitor is designed to give you an indication of the baby’s room

temperature to within a small tolerance of + 1°C or - 1°C. Other devices will also have a similar tolerance.

Q. Can I use my monitor abroad?

A. You can use your monitor in the country it was purchased and anywhere in the EU. Although your monitor may

function correctly in other countries, its operating frequency may affect (or be affected by) other devices and could

be illegal. Tomy cannot accept any liability for use outside of the country in which you purchased your monitor or

the EU.

Help the environment by disposing of your product and packaging responsibly. The wheelie

bin symbols indicate the product and batteries must not be disposed of in the domestic waste

as they contain substances which can be damaging to the environment and health. Please

use designated collection points or recycling facilities when disposing of the item or batteries.

PROBLEM

My Parent Unit will not

switch ON.

My Baby Unit will not

switch ON.

The Nightlight is active

but I cannot connect

with the Parent Unit.

There is a continuous

beeping noise.

There is a 2 x beep

alarm every minute.

There is a 3 x beep

alarm every minute.

I cannot hear anything

through my Parent Unit.

And/or:

It’s only intermittent.

My Parent Unit makes a

continuous beeping noise.

My Parent Unit makes a

random beep-beep every

minute or so.

High pitched noise.

Nightlight keeps

switching off.

Battery life after

charging is becoming

shorter.

I cannot activate the

Multicoloured Nightlight

feature from my Parent

Unit.

POSSIBLE CAUSE

The rechargeable battery (supplied)

has not been installed correctly.

The rechargeable battery maybe below the

critical voltage to activate your monitor.

Mains power is not connected correctly.

Battery insertion and/or battery life

issues.

The Nightlight is being operated

independently of the Baby Unit’s

monitoring function (which is an

intended feature).

Loss of contact alarm.

Low battery in Baby Unit.

Low battery in Parent Unit.

Volume on Parent Unit is set too low.

Units are out of range.

Units are set to Sound Activated mode.

Units are not connecting.

One or both of the Units are running

low on battery power.

Units are too close together.

Volume too high.

The Nightlight is designed to switch

off automatically after 5 minutes to

conserve battery life.

As with any rechargeable battery

it has a nite life and may need

replacing.

It is not possible to activate the

Multicoloured Nightlight feature from

the Parent Unit.

SOLUTION

Insert the battery as instructed within this booklet or the

Quick Start Guide. Once installed place the Parent Unit on

charge and leave for several minutes before switching ON.

Place the Parent Unit on charge and leave for several

minutes before switching ON.

Check the power cable connections

(including wall socket).

Check the power cable connections

(including wall socket).

Check the batteries have adequate charge and are

correctly installed.

Switch the Nightlight OFF by pressing the

button

then reactivate the Baby Unit’s main function by

pressing and holding the button.

Ensure both units are adequately powered.

Bring both units closer together and repeat the

‘Set-Up’ instructions.

Replace batteries.

Or switch to mains (AC) using the adaptor supplied.

Recharge batteries.

Increase Parent Unit volume or place into the

Docking Station to activate High Denition Sound.

Move units closer.

Refer to Sound Activated Monitoring within this

instruction booklet.

Ensure both units are adequately powered and then

follow the ‘Set-Up’ guide within this booklet.

Identify the low battery condition and either

recharge/replace batteries or switch to mains power.

Move units apart.

Decrease volume.

For continual use please switch to mains power.

Please visit our website for replacement parts:

www.tomy.eu

Activate the Nightlight and then press and hold the

button from the Baby Unit.

PAGE

6 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tomy TD 350 - Digital Plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tomy TD 350 - Digital Plus Manual

Product: