549758
2
Zoom out
Zoom in
Previous page
1/52
Next page
GB
BABY UNIT
• GETTING TO KNOW YOUR MONITOR
PARENT UNIT
Microphone
AC Adaptor Jack
Power Indication Light
Power ON/OFF Button
Quick View Key (Top)
Navigation Key
Mode/Enter Key
Belt Clip/Battery
Compartment Cover
AC Adaptor Jack/
Mini USB Jack
Power Indication Light
Speaker
LCD Display
Power ON/OFF Button
Sound Level Lights Display
Battery Level Indicator
Timer Icon
Temperature Indicator
Sound Activated Monitoring Icon
Timer Display
Volume Indicator
LCD DISPLAY
Camera Lens
Sound Activated
Monitoring
Power Saving Mode
Brightness
RETURN
(to previous screen)
Timer
Add/Remove Baby Unit(s)
2 3
•••
Low Battery on the Parent Unit
Power Indication Light will start to ash.
The battery icon on the LCD screen will
appear empty with a red border.
Alarm tone on
Parent Unit
Alarm Meaning
Indications on the Parent Unit
Out of range
This icon will appear on the
LCD display.
(Continuous)
3 beeps
••••••••
Fig.1 Fig.2
Fig.3
PARENT UNIT – BATTERY INSERTION & CHARGING
Unscrew the battery compartment cover from the back of the unit (N.B: this
may already be supplied loose). Next, link the plug on the end of the battery
pack connector to the socket inside the unit, pushing the plug rmly into
the socket until it clicks. Place the battery pack into the compartment and
screw the cover back into position. See Figure 1.
Connect the power adaptor with the mini USB-style plug to the Parent Unit.
See Figure 2. Connect the unit into the mains supply and charge for a full
7 hours. You can use your monitor while it is charging by following the ‘SET
UP’ guide below.
Important! Your Parent Unit will not function without rst inserting the battery pack.
BABY UNIT – MAINS CONNECTION
Connect the power adaptor with the jack head to the back of the Baby Unit. See Figure 3. Connect
the unit to a suitably located mains supply.
Important! Position the Baby Unit at least 1 metre but no more than 3 metres away from your
baby for best performance, ensuring all parts are kept out of reach. Under no circumstances should
you place any parts of the monitor in or on a cot. Keep cot sides and ends at least 40cm from
surrounding bedroom furniture.
The Baby Unit Camera should be positioned to give a complete view of your baby. It may be placed
upright on a at surface pointing towards your baby, or wall mounted above the cot. See ‘Wall
Mounting’ section.
• SET UP
Make sure both Parent and Baby Units are plugged into the mains and/or the Parent Unit is adequately charged. The
units should stand at least 1 metre apart.
Press and hold the ON/OFF Button
on each unit until the green Power Indication Light illuminates.
• ALARM MODES
Identify the cause of an audible alarm by using the following table; should you be unable to identify or rectify the
cause of the problem, please refer to the Simple Solution Guide in these instructions.
• MAIN MENU
Press the Mode/Enter Key to enter the
Parent Unit’s Main Menu screen. Using
the four-directional Navigation Keys,
select one of the menus and press the
Mode/Enter Key to conrm your choice.
Select the Return icon on the screen to go
back to the previous screen
GB
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomy SRV400 Digital Video at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomy SRV400 Digital Video in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info