549756

Tomy Classic Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
•
Low Battery –
Parent Unit
•
Button will change from green
to ashing red.
Alarm tone on
Parent Unit
Alarm Meaning
Indications on the Parent Unit
Loss of contact.
(Continuous)
1 beep
••••••••
• GETTING TO KNOW YOUR MONITOR
PARENT UNIT
Sound Level Lights Display
Volume Control Wheel
AC/Mains Power Input
On/Off Button
Sound Activation Switch
Channel Selection Switch
ON/OFF Button
Nightlight On/Off Button
BABY UNIT
GB GB
Microphone
Mains Cable Tidy
• SET UP
• POWER ON
For best performance we recommend both units are operated using the mains adaptors supplied. Simply plug each
adaptor into their respective units and then into a convenient mains outlet. Switch on the mains outlet and press the
switch on both units to activate.
Place the Baby Unit at least 1 metre away from your baby ensuring all parts are kept out of reach. Under no
circumstance should you place any parts of the monitor in or on a cot. For best performance we recommend that the
monitor is placed no further away than 3 metres from your baby.
For portable Parent Unit monitoring, remove the battery compartment cover from the back of the unit and insert 3 x
AAA/LR3 batteries (not supplied) ensuring correct polarity. Replace the cover and screw rmly in position.
• SELECTING A CHANNEL
Switch both Parent and Baby Units to channel 1. This need not be changed unless interference occurs. If interference
occurs change the switch on BOTH Parent and Baby Units to channel 2. If further interference occurs refer to the ‘Simple
Solution Guide’ within this booklet.
Important! Even if the two units are on different channels, it may still be possible for the Parent Unit to pick up
signals from the Baby Unit if they are close together, so you may think both units are on the same channel.
Always check to make sure both units are on the same channel.
• COMMUNICATION RANGE
Your monitor has been carefully designed to operate at its best within a 300 metre range suitable for the majority of
household environments. The range and general quality of reception may vary depending on battery power and a
number of obstructions such as walls, buildings etc.
• ALARM MODES
Identify the cause of audible alarm by using the following table; should you be unable to identify or rectify the cause
of the problem, please refer to the Simple Solution Guide within the booklet.
Channel Selection Switch
Base/Belt Clip
AC/Mains Power Input
• FEATURES AND FUNCTIONS
• VOLUME CONTROL
Adjust the volume from mute to max by moving the thumb wheel clockwise to increase or anti-clockwise to decrease.
• SOUND LEVEL LIGHTS DISPLAY
The Sound Level Lights Display on your Parent Unit reacts to the sounds of your baby. The louder your baby, the more
lights illuminate on the display. You can lower the volume of the Parent Unit whilst still watching out for baby, ideal
for when you’re relaxing or entertaining.
2
3
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomy Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomy Classic in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info