Manual Toledo TCD 1800K (page 2 of 18) (English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

485772

Zoom out

Zoom in

1/18

Toledo 35

Product: Toledo Cordless drill

Toledo, Genemuiden, The Netherlands

Sound pressure level 75 dB(A)

Vibration (

) < 2,5 m/s

Cordless drills are supplied with

batteries. If the batteries can no

longer be charged, do not throw

them away but hand them in to the

domestic chemical waste depot.

SERIAL NUMBER

The serial number on the machine consists of the fol-

lowing elements..

Serial nr.

CAREFULLY READ THE INSTRUCTIONS

BEFORE YOU USE THE CORDLESS DRILL!

SPECIAL SAFETY RULES

1. Check that:

- the voltage of the charger corresponds to the

mains voltage. Chargers with an indicated vol-

tage of 220V are also suitable for 230V;

- the cord and the mains plug are in good condi-

tion: not damaged or frayed;

- the secondary voltage of the charger corres-

ponds to the charging voltage of the battery

charger and the supply voltage of the battery;

- the voltage of the battery corresponds to the

supply voltage of the rechargeable drill.

2. Never use a long extension cord with the charger.

3. Immediately switch off the machine when the drill

bit gets stuck during drilling.

4. Always make sure the maximum allowed speed for

accessories is suitable for the speed of the drill.

5. Never tie the chuck key to the drill with a piece of

rope or something simular, but store the key in the

special holder on the top of the machine.

6. Never use the battery charger to charge other

batteries than the battery provided with the drill.

7. Never attempt to open the housing of the battery

pack. Do not incinerate the battery pack as this can

release very dangerous chemicals or cause the bat-

tery pack to explode.

8. Do not use the battery charger or the adapter in

damp or wet conditions.

WHEN USING THE MACHINE:

1. Always switch off the machine before moving it

downward alongside your body.

Never use the reverse switch during drilling!

IMMEDIATELY SWITCH OFF THE MACHI-

NE WHEN:

1. There is a failure in the battery or the battery con-

nections.

2. The switch is defective.

3. Insulation material starts to smoke or smell.

BEFORE USE

1. Use only sharp drill bits that are right for the job:

METAL HSS:

WOOD HSS:

2. Drill or screwdriver bits can easily be mounted in

the drill chuck without a chuck key. Firmly tighten

the drill chuck by hand.

3. Place the battery in the grip handle of the rechar-

geable drill. There is only one way to install the

battery correctly.

ORDER NUMBER/YEAR OF COSTRUCTION

English

2 Toledo

ART.NR

CHARGER

TYPE

V T/MIN

818810 TCD-960K 9,6 0 - 550 TCDL-960 230V~ 50 Hz

818825 TCD-1200K 12 0 - 550 TCDL-1200 230V~ 50 Hz

818845 TCD-1440K 14,4 0 - 550 TCDL-1440 230V~ 50 Hz

818850 TCD-1440K2 14,4 0 - 550 TCDL-1440 230V~ 50 Hz

818860 TCD-1680K 16,8 0 - 900 TCDL-1680 230V~ 50 Hz

818870 TCD-1800K 18 0 - 900 TCDL-1800 230V~ 50 Hz

818875 TCD-1800K2 18 0 - 900 TCDL-1800 230V~ 50 Hz

Ni-Cd

EXPLANATION OF SAFETY MARKINGS

AVAILABLE SPARE PARTS FOR TCD-1440K/TCD-1440K2

REF.NR. DESCRIPTION TOLEDO NR.

2 KEYLESS CHUCK 406190

4 SWITCH 406189

7 BATTERY TCDB-1440 406181

- CHARGER TCDL-3, 14,4 V 406182

- ADAPTOR TCDL-1440 406183

AVAILABLE SPARE PARTS FOR TCD-1680K

REF.NR. DESCRIPTION TOLEDO NR.

2 KEYLESS CHUCK 406190

4 SWITCH 406189

7 BATTERY 16,8 V, 1200 mA 406174

- CHARGER TCDL-3, 16,8 V 406175

- ADAPTOR TCDL-1680, 3 - 5 hr 406176

AVAILABLE SPARE PARTS FOR TCD-1800K/TCD1800K2

REF.NR. DESCRIPTION TOLEDO NR.

2 KEYLESS CHUCK 406190

4 SWITCH 406189

7 BATTERY 18 V, 1200 mA 406177

- CHARGER TCDL-3, 18 V 406178

- ADAPTOR TCDL-1800, 3 - 5 hr 406179

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toledo TCD 1800K in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toledo TCD 1800K Manual

Product: