593102

Tissot TOUCH SILEN-T Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
Silen-T
*
www.tissot.ch
137_EN / 06.12
3/4
Congratulations
We congratulate you on choosing a TISSOT
®
watch, one of the most highly
renowned Swiss brands in the world. With the TISSOT
®
Silen-T model, you
are about to discover an entirely new way of getting to know the time.
This
exclusive watch is the very first in the world to come equipped with a silent
vibrating alarm.
By virtue of its touch-sensitive technology and the vibrating unit fitted to
the movement, you can read and set the time and the alarm by pressing the
touch-sensitive crystal and the bezel. This function enables every individual
wearer to tell the time very discreetly, and offers particular benefits to
visually impaired people for whom this watch represents a long awaited
step forward.
Characteristics
This is a most unusual watch featuring ultramodern technology and it requi-
red many years of development. It also has a range of characteristic features
which have helped to give this brand the reputation it now enjoys, e.g.:
– Quartz analog movement, exclusive to Swiss manufacture, with silent
12-hour alarm,
– Special 316L steel case, water-resistant to a depth of 30 metres,
– Touch-sensitive crystal made of scratch-resistant sapphire with non-re-
flective coating,
– 2 year power reserve,
– 2 year warranty.
Constructed with meticulous care from the finest materials and components,
your watch is protected against shock loadings, variations in temperature,
water and dust. To ensure that your watch functions with perfect precision
for many years to come, we advise you to pay very careful attention to the
advice provided in this booklet.
use
Reading the time
– Activate the touch-sensitive crystal by pressing the button briefly (for less
than 2 seconds) (3).
– With your finger, run clockwise across the touch-sensitive crystal (5) at
the same time as the internal edge of the bezel (4) which features the
reference points in relief.
– Sense the vibrations, with one continuous vibration for one hour, and
one or more intermittent vibrations for the minutes and tell the time by
touching the indicator in relief which corresponds to the bezel (4).
Examples:
– 11 hours, 7 minutes = 1 continuous vibration at 11 o'clock and 2 short
intermittent vibrations at 1 o'clock.
– 5 hours 40 minutes = 1 continuous vibration at 5 o'clock and 1 succession
of short vibrations at 8 o'clock.
Whenever the 2 hands are superimposed, e.g. at 04:22, you receive one
continuous vibration at 4 o'clock interposed by 2 short vibrations.
Note: It is possible to read the minutes before the hours.
Setting the time
To set the time, proceed as follows:
– Pull out button (3).
– Place a finger on the desired hour, i.e. on the appropriate one of the relief
figures arranged around bezel (4). Wait for a continuous vibration to check
the correct time, then remove your finger. The hour hand then positions
itself over the chosen time.
– Place a finger on the desired minute (of 5 in 5), i.e. on the appropriate
one of the relief figures arranged around bezel (4). Sense 3 very short
vibrations following by longer vibrations corresponding to the number of
minutes you wish to add using the relief figures on the bezel. The minute
hand then positions itself over the chosen time.
– Confirm the setting and restart the Silen-T by pressing the button (3) at the
time signal from a reference clock.
Examples:
– 10 minutes = 3 very short vibrations at 2 o'clock
–
28 minutes = 3 very short vibrations + 3 longer vibrations at 5
o'clock.
Alarm
Checking the alarm
– Activate the touch-sensitive crystal (5) by pressing the button (3) briefly
(for less than 2 seconds).
– Run your finger anticlockwise around the touch-sensitive crystal (5).
– First of all, sense the hours (continuous vibration) then the minutes
(intermittent vibrations).
– After 10 seconds, or after pressing the button (3), the hands will once
again display the correct time.
Setting the alarm
– Activate the touch-sensitive crystal (5) by applying downward pressure
on the button (3) for more than 4 seconds until a short vibration is issued.
The hands then position themselves on the programmed alarm time.
– Refer to section on setting the time: same principle applies.
Activation and deactivation of the alarm
– Activate the alarm by pressing the button (3) briefly for less than
2 seconds.
– Place your finger on the 12 o'clock area. After 2 seconds, 2 vibrations
indicate that the alarm has been activated. After holding your finger
against the touch-sensitive crystal for more than 5 seconds, the alarm test
is activated.
– To deactivate the alarm, press button (3) and hold it down for less than
2 seconds. Place your finger on the 6 o'clock area. After 2 seconds, a
single vibration informs you that the alarm has been deactivated.
Alarm signal and stop functions
– Alarm signal function : a series of 7 intermittent vibrations, repeated after
1 minute.
– Alarm stop function : press the button (3).
Note: The alarm does not remain active automatically. Instead, you need to
activate it each time you wish to use it.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tissot TOUCH SILEN-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tissot TOUCH SILEN-T in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tissot TOUCH SILEN-T

Tissot TOUCH SILEN-T User Manual - German - 4 pages

Tissot TOUCH SILEN-T User Manual - Dutch - 4 pages

Tissot TOUCH SILEN-T User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info