628721
1
Zoom out
Zoom in
Previous page
1/2
Next page
Hardware Overview
LEDs
1. Power Indicator: Steady green when power on, blinking green when the call is ringing.
2. Line Keys
Steady green: during the conversation, or plan to dial a call.
Blinking red: the call is ringing.
Off: idle interface
Place a call
Three ways to make a call:
1) Handset: Pick up the handset; enter the number, and then press the send soft key or
press
.
2) Speaker
: Press or the line keys; enter the number, and then press the send soft key
or press
.
3) Headset: Press ; enter the number, and then press the send soft key or press .
Note: You can also use Contacts or call log to dial the number you want, press place the
call by the three ways mentioned. More, you can also alternate the mode during the call.
End a call
To end a call in three different modes:
1) Handset: hang up the handset or press the cancel soft key.
2) Speaker: press , or press the cancel soft key
3) Headset: press the cancel soft key.
Answer a call
1) Handset: pick up the handset;
2) Speaker: press ;
3) Headset: press .
Note: You can also reject the call by press the Reject soft key.
Redial
Press to redial the last call that dialed.
Hold
Press or press the hold soft key during a call to hold the call,
Press
or resume soft key to resume the call.
Call Transfer
Blind Transfer
a. Press or transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfers to.
c. Press
or the transfer soft key, and now the blind transfer completed.
Attended Transfer (at least one line key set as Auto)
a. Press or transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfer to, and press the send soft key or
.
c. Start the second conversation, press
or transfer soft key, then, transfer completed.
Semi-Attended Transfer (at least one line key set as Auto)
a. Press or transfer soft key during the conversation, the call is on hold now.
b. Enter the number transfer to, and then press
, then you can hear the ring tone.
c. Press
or the Tran soft key, and now the Semi-attended transfer completed.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press line 2, the call is placed on hold.
2) A enter the number of C and then press send soft key or
. C answers the call.
3) A press
or the conference soft key, then A, B and C are now in a conference.
4) If add D&E, press Line 3, the current conference is on hold, dial D and press
, the four
are in conference. Press line 4, and dial E, press
, then A,B,C,D,E are in conference.
Note: 1) If C does not answer the call, A can back to continue the conversation with B; 2)
Once A hangs up the call, the conference is ended, while if B or C drops the call, A&C or
A&B conversation continues.
Call Mute
Press to mute the microphone during the call
Press
again to un-mute the conversation.
Alphanumeric
Keypad
Message
Speaker
Headset
Transfer
Information
Hold Volume Keys
Redial / Send
Speaker
DSS Keys
Conference
Mute
Navigation
Soft Keys
Line Keys
Power Indicator
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel 3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel 3020 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel 3020

Tiptel 3020 User Manual - English - 68 pages

Tiptel 3020 User Manual - German - 2 pages

Tiptel 3020 Quick start guide - Dutch - 2 pages

Tiptel 3020 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info