Manual Timex W90 Expedition (page 2 of 31) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

806049

Zoom out

Zoom in

1/31

ENGLISH W90 094-095000

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years

from date of purchase for $5. You can pay with AMEX, Discover, Visa or

MasterCard by calling 1 800-448-4639 during normal business hours.

Payment must be made within 30 days of purchase. Name, address,

telephone number, purchase date, and 5-digit model number required. You

can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,

Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex®

watch. Your model may not have all of the features described in this

booklet.

FUNCTIONS

Real-time calendar clock, Second time zone, Countdown timer, Daily/

weekday/weekend alarm, hourly chime, Chronograph with lap/split storage,

INDIGLO® night-light with Night-Mode® Feature.

BASIC OPERATIONS

MODE OR NEXT

(Proceed to

next step)

SET OR DONE

(To save changes

and exit setting)

INDIGLO® Night-Light

START/SPLIT OR +

(Increase value. Hold

to increase rapidly)

STOP/RESET OR –

(Decrease value. Hold

to decrease rapidly)

MODE OR NEXT

(Proceed to

next step)

SET OR DONE

(To save changes

and exit setting)

START/SPLIT OR +

(Increase value. Hold

to increase rapidly)

STOP/RESET OR –

(Decrease value. Hold

to decrease rapidly)

INDIGLO® Night-Light

When setting, each button has a different function as indicated above. Watch

face will indicate when button changes function.

NOTE: On your watch the day/date display may appear below the time.

TIME/DATE/HOURLY CHIME/TIME ZONE

1. In TIME mode, press and hold SET. Time zone will ﬂash.

2. To set, push + or – to select ﬁrst or second time zone.

3. Press NEXT. Hour digits ﬂash.

4. Press + or – to change hour including AM/PM. (Scroll through 12 hours

to get to AM/PM).

5. Press NEXT. Minute digits ﬂash.

6. Press + or – to change minutes.

7. Press NEXT. Second digits ﬂash.

8. Press + or – to set seconds to zero.

9. Press NEXT. Day of week ﬂashes.

10. Press + to – to change day.

11. Continue pattern to set month, day of month, 12-hour or 24-hour time

display, MM.DD or M. MM date format, turn hourly CHIME on/off, turn

BEEP on/off. If you select BEEP on, a beep will sound every time you

push a button (except INDIGLO®).

12. Press DONE to conﬁrm and exit or NEXT to continue and set second time

zone, if desired.

13. When in Time mode, press and hold START/SPLIT to “peek” at second

time zone; hold for 4 seconds to switch time zones.

ALARM

Setting the ALARM is similar to setting TIME. Your watch model has three

alarms. Follow below procedure to set each alarm.

1. Press MODE repeatedly until ALM1, ALM2, or ALM3 appears. Select

alarm you want to set.

2. Press SET to set alarm.

3. Hour digits ﬂash. Press + or – to change hour.

4. Press NEXT. Minute digits ﬂash. Press + or – to change minutes.

5. Press NEXT. If in 12-hour format, AM/PM ﬂashes. Press + or – to change.

6. Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.

7. Press DONE to conﬁrm and exit.

8. Press Start/Split or Stop/Reset to arm or disarm alarm. When disarmed,

OFF will be displayed. When armed, the alarm clock icon t will appear.

9. The INDIGLO® night-light and alarm icon ﬂashes and an alert sounds

when the alarm goes off. Press any button to silence. A back up alarm

will sound after ﬁve mintues if you don’t press any buttons.

TIMER

1. Press MODE repeatedly until TIMER appears.

2. Press SET. Hour digits ﬂash.

3. Follow same process as setting TIME and ALARM to set hours (up to 24

hrs.), minutes and seconds.

4. Select between REPEAT/AT END (timer counts down and then repeats)

or STOP/AT END (the timer counts down and then stops).

5. Press DONE to conﬁrm and exit.

6. Press START/SPLIT to start TIMER. Timer will continue to run even if you

exit Timer mode. If REPEAT/END selected h will ﬂash. If STOP/END

selected H will ﬂash.

7. An alarm melody will chime and INDIGLO® night-light ﬂashes when the

timer has reached zero or before it starts to count down again.

8. Press STOP/RESET to stop TIMER. Press again to reset to countdown

time.

CHRONO

1. Press MODE until CHRONO appears.

2. Press and hold SET.

3. The Display will read: FORMAT/SET, then LAP/SPL or SPL/LAP.

4. Press + or – to select desired format.

5. Press DONE to conﬁrm and exit.

6. To use chrono, press START/SPLIT. Chrono continues to run even if you

exit the mode.

7. Press STOP/RESET to stop chronograph from running OR while chrono is

running, press START/SPLIT to take a split. Lap and split times will then

be displayed in the format you selected. The lap number will alternate

with the last two digits of the bottom line.

NOTES:

• Lap and split times will appear frozen for 10 seconds. Press MODE to

release the display and see running chrono.

• Press and hold STOP/RESET to reset chronograph.

INDIGLO® NIGHT-LIGHT / NIGHT MODE® FEATURE

Press INDIGLO® button to activate night-light. Electroluminescent technology

used in INDIGLO® night-light illuminates entire watch face at night and in low

light conditions. While the night-light is on pressing any button keeps it on for

three seconds.

ENGLISH W90 094-095000

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Timex W90 Expedition in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Timex W90 Expedition Manual

Product: