636054

Timewave PK-232SC Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Overview
The PK-232SC is the latest generation of multimode data controllers built upon the solid
foundation of the legendary PK-232. The PK-232SC features an expanded interface to
connect and control your radio transceiver, station accessories and computer.
The key to the new PK-232SC is a single USB cable from your PK-232SC to your
computer. No other connection is necessary. Note the PK-232SC block diagram in
Figure 1. The USB cable from the computer connects to a four port USB hub inside the
PK-232.
Port 1 of the USB hub connects to a dual USB-to-UART bridge.
One of the UART serial ports connects directly to the PK-232SC UART serial port. This
shows up on your computer as a standard COM port. Your software terminal program
connects to this COM port to control the PK-232SC.
The other UART serial port is the rig control port. This optically isolated port supports
Icom CI-V, Yaesu CAT, Kenwood logic level, and RS-232 connections. This shows up
on your computer as an enhanced COM port. Your software rig control program controls
your transceiver.
Port 2 of the USB hub connects to a USB Audio sound card inside the PK-232SC.
The sound card audio is transformer isolated from the USB circuitry. The sound
card/PK-232 switch or a software command selects either sound card transmit audio or
PK-232SC transmit audio. Receive audio from your transceiver is always connected to
both the sound card receive audio and the PK-232 receive audio.
Ports 3 and 4 of the USB hub connect to a dual USB jack on the back panel of the
PK-232SC. Use these jacks for rig control of USB-equipped transceivers and for other
USB station accessories.
A new feature in the PK-232SC is an instant reset switch. A quick flick of the switch
when the power is off resets the PK-232SC to factory default condition.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Timewave PK-232SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Timewave PK-232SC in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info