699584
20
Zoom out
Zoom in
Previous page
1/24
Next page
16
Warning! By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
Use p/q to select Load Factory Settings in the Tools menu and press OK. You are asked to input
your PIN code.
Input the correct PIN code using the 0~9 (DEFAULT PIN: 1234). A conrmation window is displayed.
Select Yes to return to factory settings.
The receiver will return to its initial state and show the Welcome page.
Select No to cancel.
Press
to leave.
7.4.3 Upgrade by USB
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.thomsonstb.net.
Place the software le (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press OK to proceed.
The upgrade menu will now be displayed.
Use p/q to select Upgrade Mode and choose option Allcode.
Use p/q to select Upgrade File and choose the le containing the latest and correct software.
When all settings have been made, move the highlight to Start and press OK to start the upgrade
process. The receiver will show a warning message.
Select Yes to nalize the upgrade or No to quit without upgrading.
NOTE: If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. See chapter 7.4.2.
Warning! Be sure to have the correct software update for your brand and model
available. Trying to update to any other software may damage the
unit and will void the warranty. After an update the receiver restarts
automatically. During the upgrade process NEVER disconnect the receiver
from the mains or switch off the power! Doing so might damage your
receiver and will void warranty!
Channel Dump and Load function
This feature allows you to load a channels list quickly and use a channel list that previously was
created on this (backup) or another receiver from the same model via the USB port.
This is useful when more receivers have to be installed on the same network, thus omitting a full scan
and (optional) sorting of channels. It is also useful as a backup for your own unit.
Channel Dump function (backup to USB)
Have a storage device connected to the USB port of the receiver. Select Upgrade by USB from the
Tools menu and press OK to proceed. The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose the option Dump channel list.
A DataBase le name containing date and time will be presented, format DBMMHHDDMMYYYY
(DatebaseMinuteHourDayMonthYear.udf).
Use pq to select Start and press OK to proceed. The channel list and favourites will be saved.
Update Channel list function (load from USB)
Have the storage device connected to the USB port of the receiver, containing a previously made
channel list on this unit or another of the same model. Select Upgrade by USB from the Tools menu
and press OK to proceed. The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose the option Update Channel list.
Use pq to select Upgrade File. Select the correct database le name, format DBMMHHDDMMYYYY
(DatebaseMinuteHourDayMonthYear.udf).
Use pq to select Start and press OK to proceed. Conrm the upgrade with OK to proceed.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THC301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THC301 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THC301

Thomson THC301 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info