Manual Thomson ROC1128PAN (page 3 of 38) (All languages)

699743

Zoom out

Zoom in

1/38

4 5

2. Then press and release the target key on

the remote control you want learned.

3. If the LED ashes 3times and then remain

on, the command has been learned

successfully.

4. Repeat these steps to learn other key

functions.

5. Press the [MUTE] and [VOL-] buttons to

save all learnt functions and to exit the

learning mode.



While replacing the batteries, the remote control

will keep the functions of the learned keys.

    

     

1. Press and hold [MUTE] and [VOL+] keys

for 5seconds until the LED will be lit.

2. Enter the code [9] [8] [1], the LED will

ash 2times and then remain on.

3. Press and release the desired key at the

replacement remote control which you

want to clear the learned command. If the

LED ashes 3times, the learned command

has been cleared successfully.

     

1. Press and hold [MUTE] and [VOL+] keys for

5seconds until the LED will be lit.

2. Enter the code [9] [8] [2], the LED will ash

2times and then remain on.

3. Press and release the [OK] key at the

replacement remote control. If the LED

ashes 3times, all commands have been

cleared successfully.

  

This remote control is equipped with an

 .Thus you could reduce the

functionality of the remote control to its basic

functions. It avoids that the TV Settings are

changed by mistake.

During the   you still could use

following keys:

Power TV ON/OFF

Volume +/-

Turn your TV sound ON/OFF

 Program +/-



Numeric keys 0–9toenter channel

numbers

Teletext ON/OFF

Use to select avariety of on screen

options

 Show the Electronic Program Guide

(if supported by the TV)



TV/AVMode



Exit Menu

   

1. Press and hold [MUTE] and [VOL+] keys for

5seconds until the LED will be lit.

2. Enter the code [9] [7] [0], the LED will ash

two times and then remain on.

3. Press and release the [OK] key,ifLED ash

3times, you have entered the 

 successfully.

   

1. Press and hold [MUTE] and [VOL+]

for 5seconds until the LED will be lit.

2. Enter the code [9] [7] [0], the LED will ash

two times and then remain on.

3. Press and release the [EXIT] key,ifLED

ash 3times, you have exit the 

.



While the   is activated only

the keys mentioned in chapter 7will work.

If one of these keys is pressed the LED will

be lit until the key is released. If one key is

pressed during the normal mode, the LED

will ash.

 

•Donot mix new and used batteries for

powering the Universal Remote Control, as

old batteries tend to leak and may cause

power drain.

•Donot use corrosive or abrasive cleansers on

your Universal Remote Control.

•Keep the Universal Remote Control dust free

by wiping it with asoft, dry cloth.

 

Q. My Universal Remote Control does not

work at all!

A. Check your TV. If the TV main switch is

turned off, your Remote cannot operate

your TV.

A. Check whether your batteries are inserted

properly and are in the correct +/- position.

A. Check whether you have pressed the

corresponding device mode key for your

device.

A. If the batteries are low, replace the

batteries.

Q. My TV responds only to some of the

commands.

A. Try other codes until most keys work

properly.

Q. Some keys of the Remote Control do not

work anymore?

A. Maybe the   had been

activated. Deactivate the   as

explained in chapter 7.2.

   

The manufacturer assumes no liability and

provides no warranty for damage resulting

from improper installation/mounting, improper

use of the product or from failure to observe

the operating instructions and/or safety notes.

   

Please contact Hama Product Consulting if you

have any questions about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here:

www.hama.com

   

   



After the implementation of the

European Directive 2012/19/EU and

2006/66/EU in the national legal

system, the following applies: Electric and

electronic devices as well as batteries must not

be disposed of with household waste.

Consumers are obliged by law to return

electrical and electronic devices as well as

batteries at the end of their service lives to the

public collecting points set up for this purpose

or point of sale. Details to this are defined by

the national law of the respective country. This

symbol on the product, the instruction manual

or the package indicates that aproduct is

subject to these regulations. By recycling,

reusing the materials or other forms of utilising

old devices/Batteries, you are making an

important contribution to protecting our

environment.



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC1128PAN in the language / languages: All languages as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC1128PAN Manual

Product: