Manual Thomson ROC 4505 (page 5 of 102) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

607819

Zoom out

Zoom in

1/102

Descr

ipt

ion

1 Remote control mode

Selects device to controlTV,DVD,VCR,…

2 Teletext

Activates and controlsTeletext,Videotext

and Fastext pages.

3 Numbered keys

Selects channels having one or 2 figures (--),

inputs numeric values,selects macro (A,B,C).

4 Channels and Sound

Keys for zapping,adjusting sound volume

and muting sound.

5 Navigation

Activates and controls menus (display,

deleting,selection,confirmation).

6 Colour keys

Use of teletext (Fastext) or the specific

functions of certain devices

7 Keys L1, L2, L3, L4

Keys dedicated to the Learning function.

Become additional function keys able to

copy other keys.

8 Play keys

For use with cassettes (VCR) or discs

(DVD,CD, …).

9 Programmable keys

HOME CINEMA:puts the remote control in

a mode allowing control of several pieces of

equipment generally found in typical Home

Cinema installations (TV,amplifier,DVD

player (page 5).

FAV:allows you to return to one of your 2

favourite channels and toggle from one to

the other (page 6).

10 On / Standby

or Standby only depending on devices.

Turns key backlight ON or OFF.

12 Installation / adjustment keys

LEARN:used for the learning codes

procedure (key copying) (page 4).

SETUP:used for various adjustment

procedures and remote control

programming.

Record key. Can be used in any remote

control mode.

14 PIP and

Display and removal of the PIP image and

information (channel number,…).

Selects the connectors (AV) to which

devices are going to be connected (TV

source / video).

Linked with keys A,B,C,this key allows

sequences of commands to be triggered.

Each sequence may include up to 10 keys.

Note: depending on devices,brands,and year of manu-

facture, the functions covered may be more or less

wide-ranging.

DVBT (DigitalVideo BroadcastTerrestrial):in those coun-

tries where this service is available,you can control a

DVBT receiver by entering its code from the separate list

under a mode key (SAT or other).

Testing the remote control

before programming

1. Turn on the device that you wish to

control.

2. Press the key corresponding to the type of

device to control:

TV :television set,

DVD :DVD player,

VCR :video cassette recorder,

SAT :satellite / cable,

AUDIO :Hifi.

3. Point the remote control at the device you

wish to control and try to turn it off using

the key. If the device does not turn off,

you must program the remote control using

one of the methodsA,B,C or D as described

below.

Note1:Except fortheTV key,eachmodekey(DVD,VCR,…)

can be programmed to control a different device from that

indicated on the key. It is therefore possible to allocate,for

example,the Satellite mode to the

DVD key.You need to

enter the code corresponding to the manufacturer and the

deviceyou wish to programby followingone of the methods

given in this manual. However,method D (automatic code

search) will simplify the task greatly.It is only necessary to

enter the code from the list corresponding to the type of

device (e.g.:0603 for aThomson satellite receiver) then to

run the automatic searchprocedure.The remote control will

then test all the codes until it finds those that control the

receiver.

The ROC 4505 is a universal remote control (4 in 1).It can replace 4 remote controls thanks to its

4 mode keys TV,DVD,VCR,…It is compatible with the majority of television sets,videocassette recor-

ders,DVD players,satellite and cable receiversas well as terrestrial digital television (DVBT),amplifiers

and other audio equipment provided they are controlled by infra red signals.It has 4 additional func-

tion keys (L1 to L4) that can be used as additional device keys.It incorporates a home cinema mode

that transforms your installation by bringing together virtuallyall devices and considering them as a sin-

gle device,each part of the remote control then controls parts of this ensemble.

This remote control has been factory programmed to allow you to use it immediately with the majo-

rity of Thomson Group devices.We therefore advise you to try it before beginning to program it. If

programming is necessary, follow one of the methods A, B, C or D that are given in this manual.But

first,install 2 batteries (AAA) in the remote control.

these

instructions

and

the

separ

ate

list

codes

saf

place

that

you

can

later

your

mote

control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC 4505 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC 4505 Manual

Product: