472027
10
Zoom out
Zoom in
Previous page
1/11
Next page
EN 10
English
Use more of your TV
subtype list.
After ltering, all your desired digital TV
programmes will be highlighted.
3. Press Guide/Exit to exit the EPG and switch to
the selected channel.
PVR(Personal Video Recorder)
Allows you to record your favourite TV programme.
Before you use the function, connect a USB memory
device to the set rst.
Note: Due to specic country requirements, the PVR
function is not available for Finland.
1. Press Option on the remote control and select
Quick access > PVR.
2. Press OK/ to enter.
3. Press:
- the red button to start recording, the record le
is put into a PVR folder in Media center > Video
and named after the channel number;
- the green button to stop recording manually; if
the recording duration nishes, the recording will
stop automatically.
- ▲/▼// to adjust the recording duration.
4. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. To watch the recorded programme, exit PVR mode
rst and go to Media center > Video. Select the
folder PVR, then select the related record le.
Press OK to play. (It is the same if you record a
digital radio programme).
Notes:
- When CI+ card is used, PVR function will be
disabled.
- Only available for digital channels.
- Only support USB memory device of FAT32
format.
- Before you plug the USB device to the set, make
sure you have backed up the data in the device
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger size of USB memory device for
PVR function, the longer you can record the
programme.
- If changing channel or signal source in recording,
store the recording data and execute the channel
or signal source change.
- The set can not play les normally if the
parameters of the le exceed the limitations of
the system, the le format is not supported, the
le is damaged, or the le can not be decoded
- Do not unplug the USB memory device when
the system is reading a le or transmitting data,
otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. Press Option on the remote control and select
Quick access > Schedule list.
2. Press OK/ to display the schedule list.
3. To add a schedule into your schedule list, press
the red button rst to display Schedule list. Then,
- Channel number: use ◄/► to select the
channel number.
- Start date: use the digit buttons to set the
recording date.
- Start time: set the starting time of recording.
- Stop time: set the stopping time of recording.
- Schedule type:
• set Reminder to inform you that you can switch
to the scheduled programme when the time you
set comes. When time out and you don’t execute
any operation, the dialog box will disappear and
no further operation will be executed.
• set Record to check if you really want to start
your scheduled recording when the time you set
comes. When time out and you don’t execute
any operation, scheduled recording will start
automatically.
- Repeat type: set different repeat mode of
recording.
4. Press ▲/▼// to select Add, then press OK to
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter.
7. Press Exit to close the menu.
Share & See
Note: This manual covers products with either Share
& See or DLNA function. Share & See is DLNA-
compatible.
Connecting to a wired network
To be able to use the Share & See advanced function
of your TV, you will need a wired connection to a
router. This requires a network cable (or Ethernet
cable) to be connected to your router. The other end
of the cable is to be connected to your LAN (local
area network) port on your TV.
Connect your PC to your router, too. Follow the
steps in turn specied hereafter, then you can enjoy
recorded video, picture, music and/or text les saved
on your PC.
Network setup
1. Press Menu on the remote control and select
Options > Network > Conguration > Internet
connection. Press ◄/► to select On.
2. Select Options > Network > Applications >
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 46FT5453 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 46FT5453 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info