Manual Thetford N3150 (page 55 of 107) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

576906

Zoom out

Zoom in

1/107

109108

6 Control of optional extras

Anti condensation

present on refrigerator model B

To prevent the control panel from condensation,

the anti-condensation function is automatically

switchedon(nosymbolvisible).Onlyswitchoff

this function when little energy is present.

Push on the anti-

condensation button.

The symbol on the control

panel will light up.

7 Use of refrigerator compartment

You can organise your refrigerator as desired by

moving the storage shelves and door bins

in height.

Make sure the door can still be closed after

reorganising shelves and bins.

Moving storage shelves

Turn the plastic clamp of

the storage shelf upwards,

as illustrated. Lift that side

a bit, and move the storage

shelf to the desired

position. First place the left

side of the storage shelf

without the plastic clamp in

the refrigerator wall, then place the other side in

the corresponding groove. Turn the plastic clamp

downwards. Your storage shelf is secured again.

Moving door bins

Push a door bin out of the

locking with both hands, as

illustrated. Place this door

bin back in the desired

position and push it back on

the locking. The door bin is

secured again.

Using slide-out box

for refrigerator model C1 and C2

You may use the slide-out

box as a tray for all your

breakfast or lunch items.

Slide out the complete box

and put it directly on the

table.

To remove the slide-out box, pull the box until the

stop. Then lift the box at the front, as illustrated.

The box is now free to remove.

Using drawer

for refrigerator model C1 and C2

The drawer is specially designed for bottles, cans

and vegetables.

To divide the drawer into

two compartments, take

the bottle retainer from the

back and place it back in a

desired groove, as

illustrated.

The maximum storage capacity of the drawer

is 15kg.

Organising food

After a minimum of 8 hours of cooling, the food can

be placed in the refrigerator. Do not completely

cover the cooling fins with food, to preserve an

optimal performance of the refrigerator. Make

sure air can still circulate around the fins.

To prevent your refrigerator from ice-

formation, always cover liquid products,

let warm products cool down before placing them

in the refrigerator and don’t open the door any

longer than necessary.

To reduce the cooling time, store only

pre-cooled food in the refrigerator.

To prevent the food from drying out or your

refrigerator from odours, store food

seperately in closed boxes.

3 Switch on refrigerator

To switch on the

refrigerator, push the on/off

switch and hold it for

1 second, as illustrated.

A light in the on/off switch

will turn green.

After 10 seconds the settings will dim.

The green light indicates the refrigerator is still in

function.

To check the settings push the on/off switch.

The last selected settings will light up.

To secure optimal performance, level your

vehicle before operating the refrigerator.

For optimal performance, switch on the

refrigerator 8 hours before placing food.

We advise to clean the inside of the

refrigerator properly, before using your

refrigerator.

4 Selecting source

After switching on the

refrigerator, push the

source button several

times, as illustrated.

Push untill the desired

source is selected.

Sources

Auto

The refrigerator automatically

select the best source available

(in order: mains, battery, gas)

230V

The refrigerator is powered from

the mains.

12V

The refrigerator is powered from

the battery of your vehicle.

Gas

The refrigerator is powered from

the gas connection of a gas

bottle.

If you set the refrigerator on the automatic source

selection, the control panel will show two source

symbols; the A and the best source available.

If the ‘auto’ function on the refrigerator is

selected, but no source is available, a light in the

on/off switch blinks red.

Always use the gas connection or mains voltage

tostartupandcool.Operatingon12Visonly

effective while the engine of the vehicle is running.

The performance of the refrigerator,

when operating on 12V, is dependent on the

thickness and length of the wiring and the overall

installation of the vehicle.

To secure optimal performance, deactivate

the start/stop system on your vehicle if

present.

When selecting gas, the flame should be ignited

within 30 seconds. If the system fails, restart the

refrigerator and select the gas

source again.

For safety reasons it is not possible to ignite the

flame within 15 minutes after driving.

From about 1000 m above sea level problems of a

physical nature can occur when lighting the gas.

This does not mean that the refrigerator is not

working properly.

5 Selecting cooling level

After switching on the

refrigerator, push the

cooling level button several

times, as illustrated. Push

untill the desired level is

selected.

Lowest

cooling level

Highest

cooling level

Your refrigerator meets the climate class SN

requirementsaccordingtoENISO15502:2005at

an ambient temperature 10°C to 32°C.

We advise to set the refrigerator on cooling

level 3, with an ambient temperature

between 15°C and 25°C. A higher temperature

needs a higher cooling level, a lower temperature a

lower level.

To improve the cooling performance of your

refrigerator in high temperatures, Thetford

advises to install the Ventilator Kit. It helps

to detract the warm air quicker to the vents.

The Ventilator Kit is suitable for all Thetford

refrigerators.

EN EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thetford N3150 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thetford N3150

Thetford N3150 Installation Guide - All languages - 37 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thetford N3150 Manual

Product: