771066
34
Zoom out
Zoom in
Previous page
1/38
Next page
30
Problems Check
Traces of dirt appear
on the wall around
the device.
When functioning, the device will be normally warm; the maxi-
mum surface temperature being limited in accordance with the
NF Electricity Performance standard. However, if you nd that
your device is still too warm, make sure the power is adapted to
the size of your room (we recommend 100 W/m2 for a ceiling
height of 2.50 m or 40 W/m3) and the unit is not placed in an air
draught which would disrupt its functioning..
The last elements
top and bottom are
cooler than the rest
of the device
At the top, the upper elements are not completely lled to allow
for expansion of the thermodynamic uid. They heat up only by
conduction.
At the bottom, the elements convey the uid return, which has
transmitted its heat.
The Expert Menu is
not accessible.
You saved a PIN. You must enter your PIN to access the Expert
menu (see the Expert Menu chapter).
The unit does not
follow internal
programming
commands.
Make sure the date and time are set.
Make sure the unit is in PROG mode and internal programming
has been selected.
An error code is
displayed
Err 3: connection sensor fault.
Err 10: Linap connection fault.
Contact your installer.
Err 6: Clean the lter (model with fan) and / or check that the air
inlet or outlet are not obstructed.
The unit does not
follow external
programming
commands.
Make sure the programming unit is correctly used (see Program-
ming unit operating instructions).
Verify that the device is in Prog mode inactive.
If you have not been able to solve your problem, contact your distributor/installer with the
reference numbers of the appliance. They are located on the side of the unit. Measure the
room temperature.
The Commercial Code (C) and Serial Number (E) will allow the manufacturer to identify
the appliance you purchased.
A Standards, quality marks
B Trademark
C Commercial Code
D Manufacturing reference
E Serial No.
F Manufacturer No. 6
A B C
D
EF
(photo non contractuelle)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermor Riva 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermor Riva 4 in the language / languages: English, French as an attachment in your email.

The manual is 7.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thermor Riva 4

Thermor Riva 4 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info