532668
4
Zoom out
Zoom in
Previous page
1/18
Next page
Pag.4
Voorbereiding tot het plaatsen van de ROSE CC (Zie Pag.11 afb.1)
Neem het toestel voorzichtig uit de doos. Onder het sierdeksel (5) bevinden zich de meegeleverde voor en ach-
terpoten inclusief de tandenrooster die aan- en in het toestel gemonteerd/geplaatst dienen te worden voordat het
toestel definitief geplaatst wordt.
Let op: Leg het toestel zeer voorzichtig op de rugzijde (i.v.m de voor gemonteerde houtset in het toestel) en
plaatst hierna de poten (7) nr.: 63 (aan de binnenzijde van de onderrand ) aan de achterzijde door eerst de M6
bouten te demonteren en hiermee de poten vast te zetten. Het zelfde doet u met de poten (6) nr.: 62 aan de voor-
zijde. Plaatst het toestel op de poten en open de glasdeur (3) om het tandenrooster (8) te plaatsen op de daarvoor
bestemde rand. De glasdeur sluiten . Het toestel is nu klaar om geïnstalleerd te worden. Zie hiervoor punt 3 op
blz. 5 “Installatievoorschriften Rose CC met concentrische kanaalaansluiting
2. Bedieningsvoorschriften ROSE CC
De Rose CC heeft 2 branders. De achterste brander wordt bediend door de thermostaatknop. U kiest de gewenste
stand en de modulerende thermostaat zorgt voor de juiste temperatuur. De voorste brander wordt bediend door de
handkraan. U kiest zelf de gewenste vlamintensiteit en de brander blijft in die stand branden tot u de gekozen
stand wijzigt.
Gasregelblok (Zie Pag. 11 Afb.2)
Aansteken
Open de gas afsluitkraan die in de gasleiding naar het toestel is gemonteerd.
Zorg ervoor dat in de uitgangspositie de thermostaatknop (A) staat op positie .
Draai de thermostaatknop naar de ontstekingspositie .
Druk de thermostaatknop in en houd deze ingedrukt.
De ontstekingsknop (C) geheel indrukken tot u een “klik” hoort, dit is de vonkontsteking.
Via het glasraam kunt u zien of de waakvlam brandt. Zonodig enkele malen opnieuw “klikken” tot de
waakvlam ontsteekt.
Wanneer de waakvlam brandt, de thermostaatknop nog ca. 30 seconden ingedrukt houden
en daarna loslaten.
Blijft de waakvlam niet branden, dan 5 minuten wachten en de procedure herhalen.
Door de thermostaatknop in de gewenste stand te draaien (tussen stand 1 en 7 afhankelijk van de gewens-
te temperatuur) ontsteekt de brander.
Om het toestel met de sfeerbrander te ontsteken de schuif (B) vanuit stand verschuiven al naar gelang
de gewenste vlamhoogte .
De sfeerbrander functioneert alleen wanneer de thermostaatknop staat tussen stand 1 en 7 (stand 1 =
kleinstand, stand 7 = volstand).Als de sfeerbrander aanstaat is de thermostaat functie uit.
Opmerking
De stand “1” op de thermostaatknop is de waakvlamstand als de kamertemperatuur 10°C of hoger is. Als de ka-
mertemperatuur lager is dan 10°C, zal de brander ook op stand 1 gaan branden tot de temperatuur is gestegen tot
10°C.
Waarschuwing
Als de waakvlam uitgaat, dan moet u tenminste 5 min. wachten voor u het toestel weer aansteekt.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermocet ROSE CC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet ROSE CC in the language / languages: Dutch as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info