606549
55
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 55 von 56
6.4 Basic setpoint value and current setpoint value
The basic setpoint value is the standard temperature for comfort mode and the reference
temperature for reduction in standby and night modes.
The programmed basic setpoint value (see Basic setpoint value after downloading the
application”) is stored in Object 0 and can be changed at all times via the bus by sending a
new value to Object 0 (EIS5).
After reset (bus returned), the last used basic setpoint value is restored.
The current setpoint value is the setpoint according to which control actually occurs. It is the
result of all the operating mode reductions or increases depending on the control function.
Example:
At a basic setpoint value of 22°C and a reduction in night mode of 4K, the current setpoint
value (in night mode) is: 22°C – 4K = 18°C. During the day (in comfort mode) the current
setpoint value is 22°C (insofar as cooling operation is not active).
The formation of the current setpoint value due to the basic setpoint value can be observed in
the block diagram on the next page.
The basic setpoint value is on the left, which was specified via Object 0 or set on the rotary
control.
The current setpoint value is on the right, i.e. the value upon which the room temperature is
effectively controlled.
As you can see in the block diagram, the current setpoint value depends on the operating
moce (5) and the control function (4) selected.
The basic setpoint value limits (2) prevent an incorrect basic setpoint value from being
specified to
Object 0. These are the following parameters:
Minimum valid basic setpoint value
Maximum valid basic setpoint value
Minimum setting on the rotary control
Minimum setting on the rotary control
The basic setpoint value limits (2) prevent an incorrect basic setpoint value from being
specified to
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 Fan Coil at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 Fan Coil in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 Fan Coil

Theben RAMSES 713 Fan Coil User Manual - English - 65 pages

Theben RAMSES 713 Fan Coil User Manual - English - 1 pages

Theben RAMSES 713 Fan Coil User Manual - German - 65 pages

Theben RAMSES 713 Fan Coil User Manual - German - 56 pages

Theben RAMSES 713 Fan Coil User Manual - German - 1 pages

Theben RAMSES 713 Fan Coil User Manual - Dutch - 57 pages

Theben RAMSES 713 Fan Coil User Manual - Dutch - 57 pages

Theben RAMSES 713 Fan Coil User Manual - Dutch - 1 pages

Theben RAMSES 713 Fan Coil User Manual - French - 59 pages

Theben RAMSES 713 Fan Coil User Manual - French - 59 pages

Theben RAMSES 713 Fan Coil User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info