to be selected, specific parameters and addresses to be as-
signed and transferred to the device.
The device is designed for wall installation. Only to be used in
closed, dry rooms.
Insert bus line in bus terminal of the control unit.
Note polarity: red = +, black = –
Press program button .
– The programming LED lights up.
– Device is in program mode.
Start-up, diagnostics and configuration are handled via the ETS
(Engineering Tool Software V3 or V4).
The double-sided clock OSIRIA KNX has 2 control units.
Therefore both clocks must be registered in the KNX bus.
Loosen screws on the top and bottom of the clock.
Connect both clocks to the KNX bus.
Assign physical addresses for both clocks.
Please note the provisions of EN 50428 for switches or similar
installation material for use in building systems technology
with regard to the correct installation of bus lines and device
start-up procedure.
Tampering with, or making modifications to, the device will
invalidate the guarantee.
• When receiving carrier signals for the first time, a zeroing
will take place after approx. 5 s, meaning the hour and
minute hands are set to the 12 o' clock position.
• Then the clock automatically sets itself to
the appropriate time.
Safety instructions
Installation should only be carried out by a professional
electrician.
Mount OSIRIA 251 BQ not below a height of 2 m, since
the clock has only a limited ball impact resistance (accor-
ding to DIN 18032-3); see mounting instruction on the
back of the clock.
Enter physical address
NOTICE
Technical data
• Operating voltage: Bus voltage KNX
• Current consumption from the bus:
max. 10 mA in Setting mode
max. 8 mA in Normal mode
• Permissible ambient temperature:
–5 °C ... +45 °C
• Power reserve: 10 days
• Protection class: III in accordance with EN 60730-1
• Protection rating: IP 20 in accordance with EN 60529
The ETS database is available at www.theben.de
Please refer to the KNX Handbook for detailed functional
descriptions.
Service address
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Phone +49 7474 692-0
Fax +49 7474 692-150
Hotline
Phone +49 7474 692-369
Fax +49 7474 692-207
hotline@theben.de
Addresses, telephone numbers etc.
www.theben.de
Start-up
Bus connection
Device to fasten the clock (from 415 mm)
Device to fasten the clock (up to 315 mm)
Clock unit
Programming push button and LED for the physical address
Bus terminal for bus connection: ensure correct polarity
Control unit
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Theben OSIRIA 240 AR KNX 5009230 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Theben OSIRIA 240 AR KNX 5009230 in the language / languages: English as an attachment in your email.
The manual is 0,26 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Theben OSIRIA 240 AR KNX 5009230
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
