606888
1
Zoom out
Zoom in
Previous page
1/2
Next page
Meteodata 140 S 24V KNX 1409201
Meteodata 140 S 24V GPS KNX 1409204
Weather station
307032 02
1. Designated use
2. Safety instructions
The weather station measures temperature, brightness and wind
speed. A rain sensor is also installed on the top of the device. The
device is designed for use on buildings.
Time/date and position can be received via an integrated GPS
module (with Meteodata 140 S 24V GPS KNX – 1409204).
ETS (Engineering Tool Software) enables application programs
to be selected, specific parameters and addresses to be assigned
and transferred to the device.
Rain is only detected when the rain sensor is sufficiently wet.
There can be a delay between the first raindrops in a shower to
the point where rain is detected.
When the rain stops, and despite heating, it can take several
minutes before the sensor is dry again and the
device is able to detect that correctly.
Caution: When it is windy, awnings/blinds take time to retract.
Configure the wind thresholds below the value provided by the
awning/blinds manufacturer.
Rain sensor becomes hot during use
Do not touch the rain sensor.
3. Description
4. Installation
1 Rain sensor with heating
2 three light sensors (front, right and left)
3 Programming push button and LED for the physical
address
4 Rotor
5 Temperature sensor
6 Wall bracket with connection for supply 24 V and bus
connection (KNX)
Do not install the wind sensor in a sheltered position.
Avoid shadows (e.g. from masts etc.) and reflected
light.
Pay attention to mounting position
– Rain sensor pointing up
– Rotor pointing down
Wall-mounting
Secure the wall bracket to the wall etc. with the screws
and washers provided (see chap. 5).
The washers are important to achieve the IP 44 protection
rating.
Feed the cables through the rubber seals and insert in
the terminals.
Loosen the screws
.
Push down the weather station until it clicks into place.
Tighten screw .
Install the weather station horizontally and
tighten screws .
Rain sensor
Rotor
Screws:
Installation should only be carried out by a
professional electrician.
Please note the provisions of EN 50428 for switches or similar
installations for use in building system technology regarding
the correct installation of bus lines and setting up of devices.
Tampering with, or making modifications to, the device will
invalidate the guarantee.
Observe extra-low voltage.
1
2
3
4
6
5
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben Meteodata 140 S 24V KNX - 1409201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben Meteodata 140 S 24V KNX - 1409201 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben Meteodata 140 S 24V KNX - 1409201

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - English - 78 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - German - 97 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - German - 2 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - Dutch - 86 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - Dutch - 2 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - French - 2 pages

Theben Meteodata 140 S 24V KNX - 1409201 User Manual - French - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info