606559

Theben LUXOR 400 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
1144..44.. SSeettttiinngg pprreesseennccee ssiimmuullaattiioonn
BBeehhaavviioouurr oonn ddaayy ooff iinniittiiaall ssttaarrtt--uupp::
A basic simulation is already stored. The presence simulation function can
therefore be activated on the day of installation.
IInnffoo::
Only those switching channels whose control LED illuminate in pro-
gramming are also switched on when the switch is activated.
11..
Set central switch to Pos. .
The
SSEETT
LED on the basic and
any connected upgrade devices must illuminate.
DDeelliivveerreedd ssttaattuuss::
All channels are activated (all LEDs illuminate).
FFuunnccttiioonn::
- Each time a manual key is pressed, the corresponding LED illuminates and
extinguishes alternately.
- If an LED is illuminated, this channel is activated during presence simula-
tion.
- If an LED is not illuminated, this channel is
nnoott
activated for presence
simulation.
EEx
xaammppllee ((sseeee FFiigg..))
C1, C2, C3 switch ON.
C4 does not switch on if presence
simulation is activated.
EEnnddiinngg pprrooggrraammmmiinngg::
22..
Resetting central switch
to Pos.
AAuuttoo
.
FFuunnccttiioonn ((wwiitthh LLUUXXOORR 440000))::
The presence simulation function recreates daily procedures of the selected
switching outputs. These are saved over a week and continuously updated.
If the switch connected to terminal is now pressed, (e.g. for absence,
holiday etc.), the presence simulation function starts at the defined switching
outputs for the period of activation. The light is switched on and off in line
with the day’s events.
1155..00 CChhaannggiinngg pprrooggrraammmmiinngg
You would like to adjust/change the assignment of the
participating channels for the central function (with
LUXOR 400):
11..
Set the central switch to the required
position - panic , central OFF , presence simulation or central ON .
The
SSEETT
LED and control LEDs of the current user channels illuminate.
CChhaannnneell sshhoouulldd nnoo lloonnggeerr
ppaarrttiicciippaattee iinn aa cceennttrraall ffuunnccttiioonn::
EExxaammppllee::
Presence simulation, see Fig. 1 below.
22..
Briefly press the manual key for the channel to be changed until the
control LED has gone out (see Fig.1, channel C3).
CChhaannnneell ccaann nnooww ppaarrttiicciippaattee iinn aa cceennttrraall ffuunnccttiioonn::
3
3..
Press the manual key for the channel to be changed until the control LED
lights up (see Fig. 2, channel C3).
EEnnddiinngg pprrooggrraammmmiinngg::
44..
Reset central switch back to Pos.
AAuuttoo..
IInnffoo
(with LUXOR 400): Only those switching channels whose control LED
illuminate in programming position also switch on when the central ON
key is activated.
11..
Resetting central switch to Pos. . The
SSEETT
LED on the basic and
any connected upgrade devices must illuminate.
DDeelliivveerreedd ssttaattuuss::
All channels are activated (all LEDs illuminate).
FFuunnccttiioonn::
- Each time a manual key is pressed, the corresponding LED illuminates and
extinguishes alternately.
- If an LED is illuminated, this channel is activated for the central function.
- If an LED is not illuminated, this channel is
nnoott
activated for the central
function.
EExxaammppllee ((sseeee FFiigg..))
C1, C2, C3 switch ON.
C4 does not switch ON when
Central ON is activated.
EEnnddiinngg pprrooggrraammmmiinngg::
22..
Resetting central switch
to Pos.
AAuuttoo
.
1144..33 SSeettttiinngg cceennttrraall OONN
IInnffoo
(with LUXOR 400): Only those switching channels whose control LED
illuminate in programming position also switch off when the central OFF
key is activated.
11..
Resetting central switch to Pos. . The
SSEETT
LED on the basic and
any connected upgrade devices must illuminate.
DDeelliivveerreedd ssttaattuuss::
All channels are activated (all LEDs illuminate).
FFuunnccttiioonn::
- Each time a manual key is pressed, the corresponding LED illuminates and
extinguishes alternately.
- If an LED is illuminated, this channel is activated for the central function.
- If an LED is not illuminated, this channel is
nnoott
activated for the central
function.
EExxaammppllee ((sseeee FFiigg..))
C1, C2, C3 switch OFF.
C4 does not switch OFF when
Central OFF is activated.
EEnnddiinngg pprrooggrraammmmiinngg::
22..
Resetting central switch
to Pos.
AAuuttoo
.
1144..22 SSeettttiinngg cceennttrraall OOFFFF
EEnndd pprrooggrraammmmiinngg::
22..
Resetting central switch to
Pos.
AAuuttoo
.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben LUXOR 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben LUXOR 400 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben LUXOR 400

Theben LUXOR 400 User Manual - German - 23 pages

Theben LUXOR 400 User Manual - German - 6 pages

Theben LUXOR 400 User Manual - Dutch - 6 pages

Theben LUXOR 400 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info