539599
2
Zoom out
Zoom in
Previous page
1/4
Next page
1.2 Buttons
To enter and edit the weather forecasting settings, make use of the following keys:
SET
- Selected City Time + Date Sunrise + Sunset
- Press and HOLD [SET] for 3 second to select your <1> Country, <2> Time Zone,
<3> Language, <4> Contrast of the LCD display
DAY/NIGHT
- Critical Weather Information Day/Night Weather Status Change
- Increase the value during setting
- Choose one of the pre-selected cities
- Decrease the value during setting
- Choose one of the pre-selected cities
TEST
- Find the place for the device which has a good reception
- Add the city to the list of your desired cities or remove the city from the list of desired cities
- Edit your home town
MEM
- Personalizing a city name
1.3. Reception of time and weather data
1.3.1 Reception of time
The time and date appear within a few minutes after inserting batteries in the main station.
Reception indicator for radio-time signal generator:
Symbol flashing Initial reception of date and time
Symbol on Time and date are current
Symbol off Time and date have not been updated
1.3.2 Reception of weather data
The transfer of larger quantities of data for the forecast takes much longer:
In order to receive all data, the station requires 24 hours after start-up.
Reception indicator for weather data
Symbol Weather data completely received
Symbol Weather data incomplete
1.3.3 Choosing the installation location
Similar to a mobile telephone network or radio/TV reception, the reception of the radio-time
receiver may not be perfect in all locations. Just a couple of notes to make sure that your
device works with no problems.
1.4.4 How to personalize a city name
- Press and Hold [ SET ] for 3 second. In the information window, is shown, and
then press [ ] or [ ] key to select the country, for example for Germany.
- Press [ SET ] key to confirm the Country and the information window will show .
- Then, press [ ] or [ ] key to select the city, and the city name will be shown in the
information window such as , and you would like to enter a new city name
which is near the region of Frankfort-on-Main.
- Press the !MEM" key ; a cursor flashes on the first position of the Information window
Use the following key for data entry:
KEY Function
' ' or ' ' Selection of a letter
SET <1> Accept the selected letter and jumps to the next position. OR
<2> If you have not entered any letter (in other words, if only the
cursor is flashing at the last position), confirm the entry with this key
and your place will also be included in the memory with immediate
effect
TEST One position back in the data entry process
** The place that you have selected to enter your own description will still exist under its own
name.
- Press [ SET ] key to confirm and exit
1.4.5 Critical weather information
- The Meteotime weather signal contains critical weather information such as gust, frozen rain,
heavy snow, thunder, strong UV, dense fog etc. for today and the coming three days.
- A critical weather alert signal will be turned on in case that day has critical weather that
the user must know.
- Sometimes there is more than one critical weather information in the 4-days. Press
[ DAY/NIGHT ] key to read the critical weather information one by one. The special icon of
the day will flash when you read the information.
- Press [ SET ] key to go back to the display of CITY SUNRISE & SUNSET TIME
TIME & DATE.
- If no key is pressed, the critical weather information will toggle to make sure you are aware
of the critical weather details
1.6 Weather symbols
Switch on all potential sources of interference (e.g. television) in the area you want to install
the station during the test!
Position the device in the location, oriented as you prefer, but at least one meter from the
possible source of interference.
Press the <TEST> button for at least 3 seconds to activate the test for the reception of weather
data. The text #SCAN$ is shown on the display. The reception indicator for the weather data
shows the quality of reception. The reception is good if the indicator is shown, otherwise a
new location must be found for installing the weather station.
The reception test is either ended after approx. 1 minute automatically or by actuating the
<TEST> button.
1.3.3.2 Possible sources of interference
Interferences as with a radio transmitter can occur and could be caused by the following
influences:
In buildings with a lot of concrete, metal parts and electrical systems, reception problems can
occur (e.g. malls).
Electrical devices such as television, computer, house-hold devices, etc. or transformers, land
lines, radio transmitters and railways are possible direct sources of interference.
Atmospheric influences and geographical features (mountains, etc.) can affect the propagation
of the radio waves.
The distance from the transmitter does also influence the reception. Areas such as Southern
Italy or Northern Scandinavia are also critical areas because of the great distances from the
transmitter.
In all regions, so-called #dead spots$ can occur making reception impossible.
Weak batteries in the device decrease the quality of reception.
1.3.4 Set time zone, language and contrast
- After installing the batteries the weather station is searching automatically for the time signal
and Meteotime reception signal (#SUCHE SIG./SEARCH SIG$). If the Meteotime signal is
received successfully, in the information window #LAND EINST. / is shown.
Remark: If you do not have any selection into the setup mode up to 60 seconds, it will
automatically exit the setup mode.In this case press and hold [SET] for 3 seconds to enter the
setup mode.
- Press [ SET ] again, then is shown in the Information window,
press [ ] or [ ] key to adjust the time zone.
- Note!
- The time received from the radio-time signal generator DCF or HBG is Central European
Time (CET, CEST). Setting the time zone is therefore only required for other time zones
(e.g. in Portugal or Great Britain).
- Press [ SET ] again, then the language will be shown in the Information window, press [ ]
or [ ] key to select your desired language. There are seven languages for selection, namely
German, English, Spanish, French, Italian, Dutch, Swedish
1.3.5 Select the country and city/cities
- Press and Hold [ SET ] for 3 seconds, is shown in the Information window.
- Press [ ] or [ ] key to select the country. For example, you have selected the country
name (Germany).
- Press [ SET ] key to confirm the Country, and then the information window will show .
- Press [ ] or [ ] key to select the city, and the city name will be shown in the information
window, for example (Frankfort-on-Main).
- If the city !Frankfurt am Main" is your selection, then press [ TEST ] key to confirm. A
will be shown on top of your selected city, and it will be and
!Frankfort-on-Main" will store into your personal memory list
- Then, you are able to press [ ] or [ ] key to select more cities, and then press [ TEST ]
key to confirm. You are able to select maximum 5 cities to display. If you want to add more
cities, then will be shown in the information window.
- Press [ TEST ] key to remove the , and this city is removed out of your list of preference
cities you have selected.
- Press [ SET ] key to quit, and will be shown in the information window.
REMARK: If you haven"t chosen a city in the first time you power up the unit, the product will
default select Frankfurt am Main as your selected city.
1. 4 How to operate
1.4.1 Switch CITY SUNRISE & SUNSET TIME TIME & DATE
- Press [ SET ] to switch from the display of the City to Sunrise & Sunset time OR Time &
Date for your selected city.
1.4.2 Switch DAY WEATHER INFORMATION NIGHT WEATHER
INFORMATION
- The unit is preset to show DAY-WEATHER after sunrise time, and NIGHT-WEATHER after
SUNSET time. If the NIGHT-WEATHER is currently shown, the user can press the
[ DAY/NIGHT ] button to see the DAY-Weather (for 10 seconds), or vice verse.
1.4.3 Display of more cities
- If you have selected more than one city, for example Frankfurt am Main, Köln and nster in
your desired city list, then you are able to press [ ] or [ ] key when the Information
window shows the CITY NAME (Press [ SET ] until it displays the city name).
- When you select another city, the sunrise and sunset time and the weather information will be
of this city.
2. Local measuring values via indoor and outdoor sensors
2.1 Display (lower window)
Pressure
- Current or historical pressure (mBar/ hPa, mmHg or inHg)
- Altitude or sea level pressure
- Sea-level pressure history for the last 24 days
- Sea-level pressure history bar chart
Moon phase
- 12 steps of moon symbols
- Scans moon phase for year 2000 to 2099
- Moon phase history for the last or future 39 days
Remote temperate and relative humidity, with trend indication
- Indoor and outdoor temperature and relative humidity display (°C or °F)
- Temperature and relative humidity trend indication
- Dew point display
- Max and Min memory for temperature and relative humidity
Comfort level indicator
- Analyzes current environmental conditions (Comfort, Wet and Dry)
Rainfall measurement
- Records rainfall amount for the last hour, last 24 hours, last day, last week and last month
(inch or mm)
- Daily rainfall alert if rainfall for the current day exceed pre-specified amount
Wind
- Temperature at place of anemometer
- Temperature adjusted to wind chill factor (°C or °F)
- Wind direction compass display. Wind direction angles available as compass points or bearings
- Average wind speed and gust speed (mph, m/s, knots, and km/h)
- Daily Maximum wind speed and gust speed memory
- Wind speed alert for average wind speed and wind gust speed
2.2 Buttons
To enter and edit the local interior and external sensors, make use of the following keys:
1.3.3.1 Reception test
The location of the weather station is very important. This is the reason for the new test
function that allows the quality of reception to be checked in the surrounding area and to
position the device in a location that has the best possible conditions.
- Press [ SET ] again and will shown in the information window. After 4 seconds, it will
go automatically to the City-Date-Time Mode
- Press [ SET ] again, then is shown in the Information window,
press [ ] or [ ] key to adjust the LCD contrast Level.
1.5 Exclusion of warranty for METEOTIME weather information
This weather station is intended for private usage as an indicator for future weather. The
forecasts of this device are to be used as orientation values and do not represent absolute,
precise forecasts.
The manufacturer or distributor of this weather station assumes no responsibility for incorrect
values or any results that may occur because of these values.
The weather station is not intended for medical purposes or for the information to the public.
The manufacturer or distributor has no influence on the transferred weather data or forecasts.
The capabilities of the weather station depend on the operational functionality of the
transmission media, which the manufacturer or distributor has no influence on. Failures in the
transmission media cannot be ruled out.
46 47
48 49
50 51
52 53
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1100 Meteotime Duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1100 Meteotime Duo in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1100 Meteotime Duo

TFA 35.1100 Meteotime Duo User Manual - German - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info