466141
13
Zoom out
Zoom in
Previous page
1/15
Next page
30
possible despite the observation of these factors, all system units have to
be reset (see “Setting up” above).
POSITIONING THE WEATHER STATION:
The Weather Station has been designed to be hung onto wall or free
standing.
To wall mount
Choose a sheltered place. Avoid direct rain and
sunshine.
Before wall mounting, please check that the outdoor
temperature and humidity values can be received from
the desired locations.
1. Fix a screw (not supplied) into the desired wall,
leaving the head extended out the by about 5mm.
2. Remove the stand from the Weather Station by
pulling it away from the base and hang the station
onto the screw. Remember to ensure that it locks
into place before releasing.
Free standing
With the detachable stand, the weather station can be
placed onto any flat surface.
POSITIONING THE TEMPERATURE TRANSMITTER:
The Transmitter is supplied with a holder that may
be attached to a wall with the two screws supplied.
The Transmitter can also be position on a flat
surface by securing the stand to the bottom to the
Transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the
screws and plastic anchors.
2. Clip the remote temperature/humidity sensor
onto the bracket.
Note:
Before permanently fixing the transmitter wall base,
place all units in the desired locations to check that
the outdoor temperature and humidity readings are
receivable. In event that the signal is not received, relocate the
transmitter(s) or move them slightly as this may help the signal reception.
The mounting surface can, however, affect the transmission range. If for
example the unit is attached to a piece of metal, it may then either reduce
or increase the transmitting range. For this reason, we recommend not
placing the unit on any metal surfaces or in any position where a large
metal or highly polished surface is in the immediate proximity (garage
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1044.55.IT - Linear Funk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1044.55.IT - Linear Funk in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1044.55.IT - Linear Funk

TFA 35.1044.55.IT - Linear Funk User Manual - German - 17 pages

TFA 35.1044.55.IT - Linear Funk User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info