613555
1
Zoom out
Zoom in
Previous page
1/2
Next page
Digitales Einstichthermometer
Mit diesem Einstichthermometer haben Sie ein elektronisches Präzisions-
gerät zur Ermittlung der momentanen Temperatur sowie der Höchst- und
Tiefsttemperatur gekauft.
Produktmerkmale:
Aktuelle Temperatur, MAX/MIN/HOLD
Einstechfühler 75 mm
Wasserdicht
Für Haushalt, Beruf und Hobby, auch für Lebensmittel gemäß HACCP
Batterie inklusive
Technische Daten:
Meßbereich: -40°C bis +200°C (-40°F bis 392°F)
Betriebstemperatur: -20°C bis +50°C (-4°F bis 122°F)
Auflösung: 0,1 °C (0.1°F)
Batterie: 1,5 V Knopfzelle
Abschaltfunktion: automatisch nach 10 Minuten
Bedienung:
Drücken Sie die ON/OFF-Taste..
Das Display zeigt die momentan gemessene Temperatur an. Der Sensor
befindet sich in der Sondenspitze. Mit der °C/°F-Taste können Sie zwi-
schen °C und °F als Maßeinheit für die Temperatur wählen.
Drücken Sie die Mode-Taste im Normalmodus, wird die gemessene Tem-
peratur festgehalten (Anzeige Symbol HOLD).
Durch erneutes Drücken der Mode-Taste erscheint die maximale Tempe-
ratur seit der letzten Rückstellung (Anzeige MAX).
Drücken Sie noch einmal die Mode-Taste, erscheint die minimale Tempe-
ratur seit der letzten Rückstellung (Anzeige MIN).
Mit einem weiteren Mode-Tastendruck kehren Sie zurück in den Nor-
malmodus.
Zur Löschung der gespeicherten maximalen und minimalen Werte halten
Sie die Mode-Taste für 3 Sekunden im entsprechenden Modus gedrückt,
während MAX bzw. MIN angezeigt wird (Anzeige ---). Mit der Mode-
Taste kehren Sie zurück in den Normalmodus.
Batteriewechsel:
Tauschen Sie die Batterie aus, wenn die Anzeige schwächer wird.
Verwenden Sie Alkaline Batterien. Vergewissern Sie sich, dass die Batteri-
en polrichtig eingelegt sind. Schwache Batterien sollten möglichst schnell
ausgetauscht werden, um ein Auslaufen der Batterien zu vermeiden. Bat-
terien enthalten gesundheitsschädliche Säuren. Beim Hantieren mit aus-
gelaufenen Batterien beschichtete Handschuhe und Schutzbrille tragen!
Achtung:
Bitte entsorgen Sie Altgeräte und leere Batterien nicht über den Haus-
müll. Geben Sie diese bitte zur umweltgerechten Entsorgung beim Han-
del oder entsprechenden Sammelstellen gemäß nationaler oder lokaler
Bestimmungen ab.
Instandhaltung:
Bewahren Sie das Gerät an einem trockenen Platz auf.
Setzen Sie das Gerät keinen extremen Temperaturen, Vibrationen und
Erschütterungen aus.
Reinigen Sie das Gerät mit einem weichen, leicht feuchten Tuch. Keine
Scheuer- oder Lösungsmittel verwenden!
Bitte führen sie eine Neuinbetriebnahme durch, wenn das Gerät nicht
einwandfrei funktioniert. Tauschen Sie die Batterie aus.
Bestimmungsgemäßer Einsatz, Haftungsausschluss, Sicherheitshinweise
Das Gerät ist kein Spielzeug. Bewahren Sie es außerhalb der Reichweite
von Kindern auf.
Dieses Gerät ist nicht für medizinische Zwecke oder zur öffentlichen
Information geeignet, sondern für den privaten Gebrauch bestimmt.
Die technischen Daten dieses Produktes können ohne vorherige Benach-
richtigung geändert werden.
Diese Anleitung oder Auszüge daraus dürfen nur mit Zustimmung von
TFA Dostmann veröffentlicht werden.
Unsachgemäße Behandlung oder nicht autorisiertes Öffnen des Gerätes
führt zum Verlust der Garantie.
Dieses Produkt erfüllt die Richtlinien gemäß der Norm EN 13485.
Eignung: S, T (Lagerung, Transport)
Umgebung: E
Genauigkeitsklasse: 1
Messbereich: -40°C…+200°C
Nach EN 13485 ist eine regelmäßige Überprüfung und Kalibrierung des
Messgeräts gemäß EN 13486 durchzuführen (Empfehlung: jährlich).
Digital Probe Thermometer
With this probe thermometer you have bought an electronic precision device
for measuring the current temperature as well as the maximum and mini-
mum temperature.
Features:
Current temperature, MAX/MIN/HOLD
With probe 75 mm
Waterproof
For household, business and hobby, also for food checks (acc. to HACCP)
Battery included
Specification:
Measuring range: -40°C to +200°C (-40°F to 392°F)
Operating temperature: -20°C to +50°C (-4°F to 122°F)
Resolution: 0.1 °C (0.1°F)
Battery: 1.5 V button cell
Auto-OFF-function: after 10 minutes
Use:
Turn on the device by pressing the ON/OFF-key once.
The display shows the currently measured temperature. The sensor is
located in the point of the probe. The temperature unit can be changed
from °C to °F by the °C/°F-key.
Press the MODE-button once in normal mode and the hold-function is
activated (indicated by HOLD).
Press the MODE-button again and the maximum temperature is shown
since the last reset (indicated by MAX).
Press the MODE-button again and the minimum temperature is shown
since the last reset (indicated by MIN).
Press the MODE-button again to return to normal mode.
To clear the maximum and minimum memory, press and hold the MODE-
button for 3 seconds in the corresponding mode while MAX or MIN is dis-
played (indicated by ---). Press the MODE-button again to return to nor-
mal mode.
Battery replacement:
Replace the battery when the display becomes weak.
Use alkaline batteries only. Observe correct polarity. Low batteries should
be changed soon to avoid the damage resulting from a leaking battery.
Batteries contain harmful acids. Wear protective glasses and gloves when
handling with leaked batteries.
Attention:
Please do not dispose of old electronic devices and used batteries in
household waste. To protect the environment, take them to your retail
store or to appropriate collection sites according to national or local reg-
ulations.
Maintenance:
Keep the instrument in a dry place.
Do not expose the instrument to extreme temperatures, vibration or
shock.
Clean it with a soft, damp cloth. Do not use solvents or scouring agents.
Please reset the instrument and follow the battery installation procedure
if the unit does not work properly. Change the battery.
Intended usage, exclusion of warranty, safety information
The instrument is not a toy. Keep it out of reach of children.
The instrument is not to be used for medical purpose or for public infor-
mation, but is determined for home use only.
The specifications of this instrument may change without prior notice.
No part of this manual may be reproduced without written consent of
TFA Dostmann.
Improper use or unauthorized opening of housing will mean the loss of
warranty.
This product fulfills the guidelines according to EN 13485.
Suitability: S, T (Stockage, Transport)
Location: E
Accuracy class: 1
Measuring range: -40°C…+200°C
In accordance with EN 13485, this instrument is subject to regular inspec-
tions as per EN 13486(recommendation: yearly).
Thermomètre à sonde digital
Ce thermomètre à sonde est un instrument électronique de précision pour
mesurer la température momentanée, minimale et maximale.
Fonctions:
Température momentanée, MAX/MIN/HOLD
Avec sonde 75 mm
Etanche à l’eau
Pour l'utilisation ménagère, professionnelle ou pour vos loisirs, aussi pour
des aliments (selon HACCP)
Batterie inclue
Caractéristiques techniques:
Plage de mesure: -40°C à +200°C (-40°F à 392°F)
Température d’opération: -20°C à +50°C (-4°F à 122°F)
Résolution: 0,1 °C (0,1°F)
Batterie: 1,5 V pile ronde
Mise hors circuit
automatique: depuis 10 minutes
Utilisation:
Ce thermomètre à sonde est un instrument électronique de précision
pour mesurer la température momentanée, minimale et maximale.
L´affichage vous indique la température momentanée. Le palpeur se
trouve à la pointe de la sonde. En pressant la touche °C/°F l´affichage de
la température peut être ajusté en °C ou en °F.
En pressant la touche MODE dans le mode normal la température mesu-
rée est retenue (affichage HOLD).
En pressant encore une fois la touche MODE la dernière température
maximale apparaît (affichage MAX).
En pressant encore une fois la touche MODE la dernière température
minimale apparaît (affichage MIN).
En pressant la touche MODE encore une fois vous retournez dans le mode normal.
• Pour effacer la mémoire max/min presser la touche MODE pour 3
secondes dans le mode correspondant, en même temps MAX ou MIN est
affiché (affichage ---). En pressant la touche MODE encore une fois vous
retournez dans le mode normal.
Remplacement de batterie:
Veuillez échanger la batterie si l’affichage deviennent faibles.
Utiliser des batteries alcalines. S'assurer que les batteries soient intro-
duites avec la bonne polarisation. Les batteries faibles doivent être chan-
gées le plus rapidement possible, afin d'éviter une fuite des batteries. Les
batteries contiennent des acides nocifs pour la santé. Pour manipuler des
batteries qui ont coulé, utiliser des gants spécialement adaptés et porter
des lunettes de protection !
Attention:
Les vieux appareils électroniques et piles usagées ne doivent pas être
jetées dans les détritus ménagers. Veuillez les rendre dans un site appro-
prié de récupération pour les enlever sous des conditions de milieu ou
chez votre revendeur selon les spécifications nationales et locales.
Entretien:
Conserver l’appareil dans un endroit sec.
Evitez d’exposer l’appareil à des températures extrêmes, vibrations ou chocs.
Pour le nettoyage du display et du boîtier, utilisez un chiffon doux humi-
de. N’utilisez pas de dissolvants ou d´agents abrasifs.
Si l’appareil ne fonctionne pas correctement, procédez à une nouvelle
mise en service. Remplacez la pile.
Usage approprié, exclusion de responsabilité, instructions de sécurité
L'appareil n'est pas un jouet. Maintenir l'appareil hors de portée des enfants.
Cet appareil n’est adapté pour des besoins médicaux ou pour l’informa-
tion publique, il doit servir uniquement à un usage privé.
Les spécifications de ce produit sont susceptibles de modifications sans
avis préalable.
Ce mode d'emploi ou des extraits de celui-ci peuvent être publiés exclusive-
ment avec l'approbation du TFA Dostmann.
Toute utilisation non conforme ou l’ouverture non autorisée de l’appareil
provoque la perte de la garantie.
Ce produit accomplit les directives selon la norme EN 13485.
Aptitude: S, T (Stockage, Transport)
Environs: E
Catégorie de précision: 1
Plage de mesure: -40°C…+200°C
Selon EN 13485 un contrôle régulier et une calibration de l’instrument de
mesure est nécessaire selon EN 13486 (recommandation: par an).
Kat. Nr. 30.1013
Bedienungsanleitung
Operating Instructions
Gebruiksaanwijzing
Instrucciones para el manejo
Mode d’emploi
Istruzioni
Kat. Nr. 30.1013
Achtung: Bitte entsorgen Sie Altgeräte und leere Batterien nicht über den Haus-
müll. Geben Sie diese bitte zur umweltgerechten Entsorgung beim Handel oder
entsprechenden Sammelstellen gemäß nationaler oder lokaler Bestimmungen ab.
Attention: Please do not dispose of old electronic devices and empty batteries in
household waste. To protect the environment, take them to your retail store or
to appropriate collection sites according to national or local regulations.
Attention: Les vieux appareils électroniques et piles usagées ne doivent pas être
jetées dans les détritus ménagers. Veuillez les rendre dans un site approprié de
récupération pour les enlever sous des conditions de milieu ou chez votre
revendeur selon les spécifications nationales et locales.
TFA Anl. No. 30.1013_05/10 31.05.2010 14:49 Uhr Seite 1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 30.1013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.1013 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info