562444
37
Zoom out
Zoom in
Previous page
1/40
Next page
• Impaq 6000 37
Troubleshooting
The following instructions should help you to solve problems. If this doesn’t work, please contact our hotline (see page 3).
Mind the warranty instructions.
Problem Possible cause Solution
The device doesn’t work,
the display is dark.
No power supply. Check that the power plug is properly seated.
Check the function of the socket with another
device.
No CD/DVD playback No CD/DVD inserted. Insert a CD/DVD.
CD/DVD inserted with the bottom up. Insert the CD/DVD with the printed side up.
The regional code of the DVD does not
correspond to that of the device.
Insert a DVD with the correct regional code.
Incorrect type of CD/DVD. Insert the correct type of CD/DVD.
CD/DVD damaged or dirty. Clean or change the CD/DVD.
Condensation in the device. Take out the CD/DVD and do not use the
device for one or two hours.
No picture The television is not turned on. Turn on the television.
The wrong AV input jack has been se-
lected on the television.
Select the right AV input jack on the television
(e. g. HDMI 1).
The connector cable is incorrectly wired or
loose.
Correct the cable connections.
Connector cable damaged. Replace the connector cable.
CD/DVD dirty. Clean the CD/DVD.
Incorrect video output jack or incorrect
HDMI format selected on the DVD pre-
ceiver.
Check the settings and, if applicable, change
them (see page 33, items 5 and 6).
Incorrect setup settings. Reset factory settings (page 35).
Picture fuzzy/distorted. CD/DVD damaged or dirty. Clean or change the CD/DVD.
Incorrect colour standard (PAL/NTSC) set
on the television or device.
Reset the colour standard (PAL/NTSC). PAL is
the correct standard in Germany and West-
ern Europe (except for France).
Fault caused by interconnected devices
such as video recorders.
Connect the devices directly.
DVD preceiver picture format has the
wrong setting.
Set the picture format correctly (page 33).
Picture format selected incorrectly on the
DVD menu.
Select the right picture format.
“CORRECTING DISC
ERROR..” on the top left of
the screen.
CD/DVD damaged or dirty. Clean or change the CD/DVD.
NEXT, PREV, GOTO dont
work.
Some DVDs dont allow skipping, for
example, during the warning notice at the
beginning.
Continue playback.
The DVD only has one chapter. Alternative: Fast forward.
No audio channel or not
all audio channels are
audible.
Devices have not been turned on or have
been incorrectly set.
Activate devices and make the correct set-
tings.
Devices wired improperly. Wire the devices properly.
Incorrect DVD audio track selected. Select another DVD audio track with the but-
ton “AUDIO” on the remote control.
Television or DVD preceiver muted
(“MUTE”).
Push the MUTE button to deactivate muting.
Function PAUSE, STEP, SLOW or SEARCH
active.
Switch to normal playback with the button
PLAY.
91339 GB 20100111.indd 3791339 GB 20100111.indd 37 11.01.2010 14:09:54 Uhr11.01.2010 14:09:54 Uhr
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Impaq 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Impaq 6000 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info