562467
16
Zoom out
Zoom in
Previous page
1/20
Next page
16 • DecoderStation 7
Special function buttons
Surround
With the button 40 “SURROUND”, you can switch the
surround mode in the following order:
2.1 Stereo Stereo only via front left/right and
subwoofer
5.1 Stereo Stereo across all channels (upmix)
Dolby PLII Movie Dolby ProLogic II for movies
Dolby PLII Music Dolby ProLogic II for music
DTS NEO:6 Music DTS NEO:6 for music
DTS NEO:6 Cinema DTS NEO:6 for cinema
Some options may not be available if not all satellite
speakers are connected.
Dolby
Digital and DTS (standard and HD)
The surround mode is fixed for Dolby Digital or DTS
coded multi-channel tracks; this menu is therefore not
available while these formats are played back.
Test tone
With this function, you can monitor and set the level for
the speaker channels.
Push the “TEST” button 33. A test sound (“pink noise”)
will be emitted on all speakers one after another.
With the adjustment keys 31 “LEVEL +/–” you can
adjust the volume of the currently active channel within
the range of “–10” to “+10”.
To stop the test sound, push the “RETURN” button 28.
We recommend using a Teufel sound-level meter, which
you can order on our website in the accessories area.
Channel level buttons
Here you can increase and decrease the relative volume
for each speaker, even during playback.
Select the desired speaker by pushing the button 32
“CH SEL” several times.
Sub – Subwoofer
Left – Front left
Right – Front right
Center – Center
Sur. L – Surround left
Sur. R – Surround right
Rear L – Rear left
Rear R – Rear right
With the adjustment keys 31 “LEVEL +/–” you can now
adjust the relative volume within the range of “–10” to
+10”.
To exit the function, push the “RETURN” button 28.
28
40
32
31
33
Dimmer
With the “DIMMER” button 34 you control display panel
brightness. The display brightness changes every time
you push the button: bright, medium, dark, off.
Equalizer
As with the menu function (see page 14), this provides
you with fine sound adjustment in nine frequency bands.
Possible values: each from –20 dB (decrease) to +6 dB
(increase).
Push the “EQUALIZER” button 38.
Select the desired channel by pushing the “EQUAL-
IZER” button 38 several times or with the arrow buttons
27
/
.
Push the button 37.
Select the desired frequency band with the arrow but-
tons 27
/
and set the level from -20 dB (decrease)
to +6 dB (increase) with the buttons 27
/
.
Push the “RETURN” button 28 to finalise the setting.
Note: The equalizer is inactive with some high-definition
formats.
38
34
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel DecoderStation 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel DecoderStation 7 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info