Manual Teufel CS 35 Mk3-Set (page 6 of 8) (English)

686230

Zoom out

Zoom in

1/8

• CS 35 Mk3-Set

Front speakers

• The front speakers CS 35 FCR Mk3 are placed to the

left and right of the screen.

• They should form, as far as possible, an equilateral

triangle with the listener – what is known as the stereo

triangle (distance to listener = distance between

speakers).

• The speakers should project sound directly into the

room or slightly towards the listener.

Center speaker

• The center speaker should be placed centrally on an arc

curving slightly towards the television.

• The table stand ensures that the speaker is stable and

minimises vibration

. No ﬁxing is required: place the

speaker in the centre of the stand.

Surround speakers

The surround speakers are placed or wall-mounted to the

sides of the listener at head height (140 to 210 cm).

Wall mounting

If you choose to wall-mount your speakers, please note

the following:

Danger

Risk of damage!

Incorrect mounting can lead to damage.

• If mounting the speakers on the wall, make sure that

the job is carried out by a professional.

• Before drilling holes use a metal detector to make

sure that there are no electrical cables or pipes in

the wall within the drilling area.

• Use only suitable screws and wall plugs for ﬁxing.

Verify the carrying capacity of the walls.

• Use the key-hole slot(s) on the rear

of the speakers to hang the speak

ers on the screw(s) ﬁxed into the wall

before.

• The key-hole slot(s) and the threaded

hole on the rear of the speakers are

also intended for ﬁxing the speakers

to a wall bracket or speaker stand

(you will ﬁnd suitable items in our

online shop).

Connecting

Danger

Danger of injury/damage!

Arrange the cables so that they do not pose a

trip hazard.

• Unplug the power plug of your AV receiver or multi-

channel active subwoofer from the mains.

• Lay speaker cable from your AV receiver or multi-chan-

nel active subwoofer to the speaker. Use a high-quality

double wire speaker cable with marked strands for this.

• Use the connection terminal with the two clamps on

the back of the speaker to connect the speaker cables.

• The terminals are each marked red (+) and black (–).

Make sure the polarity is correct!

Connect the like coloured terminals.

The speaker connections on your AV receiver

or multi-channel active subwoofer

should be similarly

marked. The strands of the speaker cables are marked

with different colours or shapes.

1. Split the wire down by approx. 30 mm on both ends and

remove approx. 10 mm of insulation each.

2. Twist the wire so that no strands are protruding.

3. Press down the red and the black levers on the con-

nector clamps and guide the exposed ends of the sin-

gle wires into the openings which are accessible now.

Releasing the levers clamps the single wires securely

in place.

4. Connect all of the cables to the speakers in this way.

5. Connect the other ends of the speaker cables to your

AV receiver or multi-channel active subwoofer. You

should be able to ﬁnd corresponding notes in the oper-

ating instructions of your device.

Crossover frequency

• The optimum crossover frequency for the

CS 35 Mk3-Set

is 150 Hz. Where possible set your AV

receiver or Decoder Station as close as possible to this

value.

• If the satellite speakers are used as part of a Concept

C set the crossover frequency will be provided by the

subwoofer.

• For Concept E sets without DecoderStation you set the

crossover frequency in your soundcard settings. If it is

not possible to do this then please select the setting

“small” for the satellite speakers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teufel CS 35 Mk3-Set in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel CS 35 Mk3-Set

Teufel CS 35 Mk3-Set User Manual - German - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teufel CS 35 Mk3-Set Manual

Product: