704033
19
Zoom out
Zoom in
Previous page
1/20
Next page
• DecoderStation 7 19
Troubleshooting
The following advice should help you to solve problems. If this doesn’t work, please contact our hotline (see page 3).
Take note of the warranty instructions.
Problem Possible cause Solution
The DecoderStation 7 is not
working, the display panel
2 is not illuminated.
The device has no power. Check if the mains adapter plug is con-
nected to the jack 1912V” and to the
socket.
The device is not working,
but the display panel is
illuminated.
The volume has been set too low. Increase the volume with the control dial
or “VOL +” button 25.
Playback is noisy. Generally speaking, this is a very low-noise
system. The system with exceptional resolution
in the high-range area can expose the poor
quality of a signal source (e.g. from MP3 files)
mostly.
Ensure that the source is sending a clear
signal.
With stereo sources, for ex-
ample with radio playback
or a MP3 player, the rear
satellites and/or center are
inactive.
MP3s, radio and many television programmes
only have stereo sound.
Use the remote control to switch the
decoder to Pro-Logic mode or to one of
the DSP modes (5.1 stereo).
You are unable to switch
the surround configuration.
You are probably using a digital input. If a
Dolby or DTS signal is received on this input,
the DecoderStation 7 will automatically switch
to the correct surround configuration.
No Dolby-/DTS multi-chan-
nel sound is issued via the
connected digital source.
If digital sources are being played, the Decod-
erStation 7 automatically recognises the format
of the signal source. If the decoder fails to play
multi-channel sound, there is presumably no
multi-channel signal. Digital signal sources do
not always transmit multi-channel sound, but
may also emit regular stereo sound (2.0).
This is often the case, for example, when receiv-
ing a television signal with digital receivers.
Use the remote control to switch the
decoder to a Pro-Logic mode or to one of
the DSP modes (5.1 stereo).
The digitally connected
sound card is not transmit-
ting any multi-channel
sound when playing com-
puter games.
Many soundchips are capable of producing
surround sound in real-time and issuing it via
the sound card's analogue outputs. However,
digital encoding of the calculated multi-channel
sound is also necessary in a Dolby-AC3 stream
for transmission via a digital connection. Only
if the sound card is capable of real-time encod-
ing and transmission to the decoder, can direct
decoding (that is, splitting of the signal into its
analogue components) occur.
Presently, only very few game consoles such as
the Microsoft Xbox 360 or the Sony Playstation
3 and a limited number of sound cards with
Dolby® Digital Live support are capable of
performing real-time encoding.
Connect your 5.1 sound card to an ana-
logue jack of the DecoderStation 7.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Complete 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Complete 7 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Complete 7

Teufel Complete 7 Additional guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info