704029
3
Zoom out
Zoom in
Previous page
1/4
Next page
Attention
Risk of damage!
Improper assembly may result in damage.
If mounting the speakers on the wall, make sure that the
installation is carried out expertly.
Before drilling the holes, make sure that no pipes are
located within the drilling area using a metal detector.
Only use suitable screws and dowels to mount the speak-
ers. Verify the carrying capacity of the walls.
Hang the center speak-
er up on the wall using
the keyhole openings
on the speaker back
side and the screws you
previously mounted.
You can also use these
openings for mounting
a wall holder. You can nd suitable products for this in our
web shop.
Removing the protective grids
The protective grids are
attached by pins and
sockets on the front of
the speaker and can be
easily removed. When
the protective grids are
removed, high frequen-
cy output becomes clearer in particular.
To remove the protective grids, reach behind them and slowly
pull them off to the front.
Attention
Risk of damage!
Make sure that you do not touch the highly sensi-
tive diaphragms.
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
1. Pull the power plug of your amplier/AV receiver out or multi-
channel active subwoofer of the outlet.
2. Lay the speaker cables from your amplier/AV receiver or
multi-channel active subwoofer to each speaker. These
cables should be high-quality double-wire speaker cable with
marked strands.
3. A connector comprising two terminals is located on the
back side of each speaker, to which you have to connect the
speaker cables.
The terminal clips are each marked red (+) and black (-).
Make sure the polarity is correct!
Connect the like coloured terminals. Otherwise the
sound quality will suffer.
The speaker connections of your
amplier/
AV receiver or
multi-channel active subwoofer
should be marked similarly.
The strands of the speaker cables are marked with different
colours or shapes.
4. Split the single wire down to approx. 30 mm on both ends
and strip approx. 10 mm of insulation off of each cord.
5. Twist the stripped single wire ends together so that no wire
protrudes. Tin coating is not necessary.
6. Turn the connector terminal counterclockwise until loose.
Run the stripped cable end into the now visible hole. Close
the terminal by turning it clockwise. The cable has now been
clamped in place.
7. Connect the speaker cables to your amplier/AV receiver
or
multi-channel active subwoofer. The operating instructions of
the appliance should contain notes on this.
8. Reinsert the power plug of your amplier/AV receiver or
multi-channel active subwoofer into the outlet.
Crossover frequency
The ideal separation frequency for this speaker is 150 Hz. Set
this value on the amplier/AV receiver or DecoderStation.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Columa 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Columa 250 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Columa 250

Teufel Columa 250 Additional guide - English - 8 pages

Teufel Columa 250 Additional guide - English - 16 pages

Teufel Columa 250 Additional guide - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info