Manual Teufel Cinepaq 6300 (page 3 of 41) (English)

704024

Zoom out

Zoom in

1/41

· LT 3 PE

General note: Make sure to read this operating manual care-

fully and in its entirety. Before plugging in the units for the rst

time, make sure you have complied with all relevant safety and

operating instructions. Keep this operating manual in a safe

place so you can refer to it at a later date if necessary.

Always: If in doubt, consult the operating manual. Make sure

to comply with all instructions regarding the units' setup and

ongoing operation.

Cleaning: Only use dry or moist cloths to clean your speaker

cabinets Never use abrasive or alcohol-based cleaning prod-

ucts. If you need to clean a speaker membrane, do so very care-

fully using a dry cloth. Before cleaning a unit, always unplug the

power cable.

Humidity and sunlight: Never operate the unit in humid or

wet spaces, e.g., near a bath tub, shower, wash basin, drain, in

a damp basement, or near a swimming pool. Never expose the

loudspeakers to excessive humidity. Also avoid exposing them to

direct sunlight. Do not expose device to dripping or splashing

water. Do not place objects lled with liquids, such as vases on

the device.

Placement: Never mount the units loosely in a vehicle, on an un-

stable surface, on a loose stand, on unsuitable furniture, or with

insufcient bracing. The loudspeakers could topple and cause

personal injuries, which you will be liable for. Especially when

speaker cabinets are mounted on stands or placed on top of

TV sets/monitors, they may topple due to external stress (cable

being pulled, tripping over cable, accidental physical contact)

– even if they seem to be mounted quite securely. As a result

of their weight, toppling speaker cabinets can cause consider-

able damage, as well as becoming badly damaged themselves.

The same applies to undersized or unprofessionally installed

wall-mounting brackets, particularly on light walls. Always use

adequately sized wall brackets for mounting loudspeakers, and

ensure that the wall can withstand the stress. Never mount the

units near a heat source. This could be a heater or oven, but

also any other electrical device that heats up during operation

(e.g., amplier). Similarly, never place a heat source on top of the

loudspeakers, such as a fan heater or candles.

Ventilation: There are several ventilation slits and openings in

the unit's housing. These are designed to ensure reliable opera-

tion and stop the unit from overheating. Never block or cover

the ventilation slits; do not place the unit on a soft surface

such as a bed, couch, carpet, etc., as this blocks the ventilation

slits in the bottom of the housing. Do not put any newspapers,

tablecloths, etc., on top of the unit. Most importantly, do not

cover up the heat sink of the amplier section or expose it to

direct sunlight. Conversely, you should generally not attempt

to provide additional cooling to the unit yourself. This is not

necessary.

Power source: Make sure to connect the subwoofer to a power

source that provides the correct voltage, i.e., the voltage in-

dicated on the type plate. If you are unsure about the voltage

provided by your domestic power connection, please contact us

or your local electricity provider for advice. The unit does not

require earthing. When connecting to the mains power socket,

always use the supplied two-pole power cable. Under no circum-

stances should you modify the power cable, as it must comply

with the ofcial polarity and earthing regulations. Make sure to

plug the power cable only into a double-pole socket.

Make sure

the power switch is in the “off” position before connecting or

disconnecting the device.

Cables: Lay all the cables ush with the oor and walls. Avoid

any loops in your cables that could cause people to trip up.

Cable loops can also cause electrical interference and degrade

the sound quality. Make sure to lay your power cables out

of reach so that they are not stood on or squashed by heavy

objects. If you notice any cable damage, replace the cable. Pay

special attention to all plug connectors, the mains socket and

the subwoofer's connector panel. Regularly check all powered

cables to and from the loudspeakers for insulation issues and

breakage. If you detect a fault, immediately power down all con-

nected units, unplug the cables and replace the defective cable.

Disuse: During prolonged periods of disuse (holidays, etc.), al-

ways unplug the subwoofer from the mains socket.

Thunderstorms: In the event of a thunderstorm, switch off and

unplug the unit as soon as you can in order to avoid damage

from lightning strikes.

Overloading: Never overload your wall sockets, extension

cables and multiboxes, or the integrated power sockets on

your electrical devices. Power overloads can cause short cir-

cuits and res. Also avoid turning up the volume control exces-

sively on your amplier, particularly if you are also boosting

the bass frequencies (bass control, loudness button, bass boost

button, etc.).

Liquid and foreign substances: Liquids or other foreign sub-

stances should never get inside the unit, as they may interfere

with exposed live parts and cause short circuits or res. Abso-

lutely avoid spilling any type of liquid onto the unit. In case of a

fault: Never attempt to repair the unit yourself. Always contact

our support team rst and discuss the fault with them. If ap-

propriate, they may give you instructions on how to clear the

fault. If this is not possible, send the unit directly to our service

address.

Transport: Take utmost care when transporting the unit, and

use a sack barrow if possible. Be aware that both the sack bar-

row and the unit can easily fall over as a result of sudden stop-

ping or jolting (uneven ground, lurching movements, etc.).

Unusual noises: If any unusual noises occur during operation,

or if the sound gets distorted, immediately turn down the am-

plier volume to a level where the sound returns to normal.

Replacing the fuse:

Unplug the power cable before replacing the fuse. Make sure

that the replacement fuse has the same rating as the defec-

tive fuse.

Speaker volume: Excessive loudspeaker volume can cause ir-

reversible hearing loss. The subwoofer may emit high sound

pressure levels very unexpectedly when it is suddenly triggered

into activity by a bass impulse (“Standby/Auto On” mode) – par-

ticularly if the unit is on full volume. As well as physical hearing

loss, also watch out for psychological stress caused by excessive

volume. Children and pets are particularly sensitive to noise. Al-

ways set the volume control of your audio system to a level that

is appropriate to the surroundings. When the system is playing

at high volume, do not stand too closely to the subwoofer and

never put your ears directly up to any of the loudspeakers.

Please read the following

safety guidelines

very carefully.

Packaging materials,

particularly plastic bags and

foils, should be kept out of

children's reach, as they can be

dangerous (e.g., risk

of suffocation)

Never leave your children

alone with electrical devices, as

there is always a risk of

electrical shock.

In case of an emergency:

Immediately disconnect the

unit's power plug from the

mains socket. In the following

cases, please contact one of our

service technicians:

4 Power plug or cable

is damaged

4 Liquid or

other foreign substances

have got inside the device

4 The unit has been directly

exposed to rain or another

type of liquid

4 The unit is inoperative

even though you have

followed all the operating

instructions

The unit has been dropped

or otherwise damaged

We are not liable for any inci-

dents resulting from disregard

of the safety guidelines.

Safety guidelines

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 6300 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teufel Cinepaq 6300 Manual

Product: