10
AFTER USING THE SOUNDBAR
Set it to Standby.•
CARE AND CLEANING
All care and cleaning operations should be carried out
with the unit unplugged from the mains power.
The surface of the unit can be cleaned with a dry
cloth. Never use abrasives, abrasive cloths or chemical
solvents .
Loudspeaker grilles can be cleaned carefully with a soft
brush.
Supply Voltage ................... 15 V , 2A
AC adapter input ................ 100 - 240 V ~, 50/60 Hz
AC adapter output ............... 15 V , 2A
Power consumption ............ 30 W
Net Weight: ......................... 1.2 kg
Class II construction double insulated.
This product must not be connected to earth.
UK: Waste electrical products/batteries
should not be disposed of with household
waste. Separate disposal facilities exist, for
your nearest facilities see www.recycle-
more.co.uk or in-store for details.
ROI: Produced after 13th August 2005.
Waste electrical products/batteries should
not be disposed of with household waste.
Please recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
CARE AND MAINTENANCE
WARRANTY
SPECIFICATIONS
Your Tesco appliance is covered by a warranty for 12
months from the date of purchase. If a fault develops
during this period, please contact the TESCO electrical
help line. Please have your original purchase receipt
with you when you call. This warranty in no way aects
your consumer rights.
TROUBLESHOOTING
No sound
Check that the Soundbar is not set to Standby.•
Check that the correct input is selected.•
No sound/low volume (computer or personal audio
player connected to the AUX IN input)
If the source has a volume control, check that this •
is turned up.
No sound (digital audio source)
Check that the sample rate of the source is in the •
correct range for the Soundbar.
No remote control operation
The batteries may be at. Try replacing the •
batteries.
The Soundbar sets to Standby when idle
The Soundbar will set to Standby automatically if
standing idle for 120 minutes with no signal. This is
normal and an energy saving feature. Press the
button to switch on and continue using the Soundbar.
NOTE: the auto-standby function may be enabled if
the volume of audio sources is set too low. To prevent
the soundbar entering the standby mode during use,
ensure the input device volume is more than 50%.
Volume can be adjusted on the soundbar or the remote
control.