Manual Tesco FP11 (page 2 of 2) (English)

490809

Zoom out

Zoom in

1/2

Page 2

$Read all the instructions carefully before using your use of the appliance by a person responsible for their

appliance and keep them for future reference. safety.

$Unplug the appliance from the mains supply when not in $Children should be supervised to ensure that they do not

use, when removing or attaching accessories, or before play with the appliance.

cleaning any part of the appliance.

When operating your appliance:

$This appliance is for occasional household use only.

$When the appliance is not in use make sure that it is safely

$Do not use outdoors or in damp conditions. unplugged from the mains supply.

$Do not immerse the motor unit or the electrical cord or plug $To reduce the risk of injury, never attach the blade without

in liquids. first securing the bowl properly in place.

$Do not use near a source of heat or on an unstable surface. $When using the appliance ensure there is adequate room

in the vessel.

$Ensure that the power cord does not touch any hot surface

and that it does not overhang the edge of your work $Do not operate the appliance with an empty bowl.

surface.

$Do not run the appliance continuously for more than 3

$Before unplugging the power cord switch the machine off. minutes. After a prolonged period of continuous use let the

When unplugging, hold the plug top, not the power cord. unit rest for 25-30 minutes before using it again.

$Do not operate any appliance with a damaged cord or $The blades on this appliance are sharp. Treat them with

plug or after the appliance malfunctions, or is dropped or care at all times and never allow fingers, hair, or clothing

damaged in any manner. Return the appliance to the to come into contact with a blade.

nearest authorised service facility for examination, repair

$If you wish to scrape the contents of the bowl with a spatula,

or electrical or mechanical adjustment.

remove the blade first.

$Do not use attachments or accessories which are not

$Do not process food containing hard objects, such as meat

recommended by the manufacturer. They may cause

containing bones or fruits with large hard stones, which

malfunction or injury.

cannot be safely broken up by the blade.

$Do not attempt to replace the power cord on this

$If a blade gets clogged, switch off, unplug from the mains

appliance. This should only be carried out by authorised

and allow the unit to stop before clearing the obstruction.

service personnel with specialist tools.

$Operate the appliance is on a sturdy work surface. and

$Store the appliance away from direct sunlight and out of

hold or support it during operation

the reach of children.

$Do not yank or pull the cord as this may damage it and

$There are no user serviceable parts in your appliance

eventually cause a risk of electric shock.

Unauthorised dismantling or servicing will void the product

$To protect against fire, do not operate the unit in the

warranty.

presence of explosive and/or flammable fumes.

$Do not use the appliance for any purpose not expressly

$Keep the appliance out of the reach of children.

specified in this manual.

$NOTE: Never process liquids or foods with a high liquid

$This appliance is not intended for use by persons (including

content as they may leak into the appliance motor.

children) with reduced physical, sensory or mental

$NEVER process hot foods, and especially hot liquids.

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

Safety Guide-Please Read Carefully

FP11 Food Processor User Guide

Preliminaries

Introduction

Always make sure the appliance is unplugged from the mains

Refer to the illustration on the next page and identify the

when cleaning, attaching or removing accessories

components.

Before using your appliance for the first time:

The packaging contains:

Disassemble the mixer. Refer to the assembly instructions on

$The processor motor, mixing bowl and lid

the next pages and reverse the procedure.

$Feed tube and Pusher

Separate the mixing bowl and the lid from the motor unit.

$‘S’ Blade and blade cover

Disassemble the Pusher and feed tube.

$Grating Plate

Remove the protective cover from the S blade.

$Slicing Plate

Ensure the Grating and Slicing plates are removed from the

$Plate Holder

plate holder.

$Plate Shaft

Wash the S blade and the grating and slicing plates in warm

Remove all packaging from the appliance. Retain the

soapy water, taking care not to touch the cutting surfaces.

packaging. If you dispose of it please do so according to

Rinse and dry thoroughly. Replace the protective cover on the

any recycling regulations.

S blade.

If items are missing or damaged, contact your nearest Tesco

Now wash the plate holder and shaft, the mixing bowl and lid,

store for assistance.

the pusher and feed tube in warm soapy water, rinse and dry

Read and retain the manual. If you pass the product on to a

thoroughly.

third party, make sure to include this manual.

Wipe the motor unit with a damp cloth and dry thoroughly.

Your Food Processor Components

Page 3 Page 4

Lid

Motor Unit

Mixing Bowl

Speed Control

Power Cord

Slicing Plate

Plate Holder

Grating Plate

Plate Shaft

S Blade Cover

S Blade and Shaft

Feed Tube

Pusher

1: Ensure the appliance is disconnected from the mains.

Place the unit on a solid level surface and hold it securely.

Place the bowl on the motor base and then turn the bowl

clockwise until it is locked onto the motor base. The ‘LOCK’

mark on the bowl should align with the arrow on the base,

2: Hold the S blade attachment as shown. Gently

squeeze the protective cover and then remove it, taking

care not to touch the blade. If necessary wear

protective gloves.

To replace the cover reverse the procedure.

3: Place the blade onto the motor shaft and check it is secure.

You may now place ingredients into the bowl or wait until the

lid is in place and then insert the ingredients through the funnel

in the lid.

4: Place the lid on the bowl. Locate the lug to the left of the slot in the motor

unit. Turn the lid clockwise (to the right) and lock it firmly into position.

IF THE BOWL AND THE LID ARE NOT SECURELY LOCKED THE

APPLIANCE WILL NOT OPERATE. THIS IS A SAFETY FEATURE

You may optionally use the feed tube/pusher

assembly.

5: The pusher may be used locked or unlocked to the

feed tube. When the pusher is locked the feed tube

acts as a stopper when it is inserted into the funnel in

the lid.

6: To unlock the pusher rotate it so that the knurled

part is parallel with the feed tube. To lock it rotate it so

that the knurled part is at right angles to the feed tube.

Note: The pusher has a scale on the side so it can be

used to measure small amounts of dry ingredients or

liquids.

LOCKED UNLOCKED

Assembling Your Processor

The assembly procedure varies slightly depending on whether you are using the appliance for processing food or slicing/grating.

Assembling the Processor for normal use

Preparing the plate holder for grating or slicing

To attach the slicing or grating plate: At the side of the plate by the blade end there is a small tab. Place this in

the recess at the side of the holder and press down to lock the plate in place. The plates will only fit one way.

To remove the plate: Lift the plate up at the end removed from the blade and then remove the plate.

Take care not to touch the blade. If necessary wear protective gloves.

ATTACH

REMOVE

Funnel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tesco FP11 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tesco FP11 Manual

Product: