14
AC Adaptor supply input: ...
100-240 V~, 50/60 Hz, 0.2A
AC Adaptor output: ............ 6 V 1 A
Product input: .................... 6 V 1 A
DAB: ................................... 174 - 240 MHz
FM: ..................................... 87.5 - 108 MHz
Net Weight: ........................ 0.8kg
Class II construction double insulated.
This product must not be connected to earth.
WARRANTY
SPECIFICATIONS
Your Tesco appliance is covered by a warranty for 12
months from the date of purchase. If a fault develops
during this period, please contact the TESCO electrical
help line. Please have your original purchase receipt with
you when you call. This warranty in no way aects your
consumer rights.
UK: Waste electrical products /batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your
nearest facilities. See www.recycle-more.co.uk
or in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
After using your radio
Set the radio to Standby or switch it o.•
Unplug the radio from the mains if you are leaving it •
unattended for a long period (holidays etc).
Care and cleaning
All care and cleaning operations should be carried out
with the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster. Never
clean the unit with liquids or solvents.
CARE AND MAINTENANCE
TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try adjusting the
aerial position while watching the signal strength on the
bargraph. Signal strength can be displayed by tuning to a
DAB station and pressing the Info/Menu button until the
signal strength bargraph is displayed.
Few DAB stations are available after moving area
The radio should be reset to renew the station list. Refer to
the ‘Factory Reset’ section on page 9.
Poor quality FM reception
If you are listening on headphones to a station with a
weak signal, try setting to mono reception.
FACTORY RESET
DAB is a terrestrial system and frequencies in dierent
areas vary. If you move the radio to another part of the
country, performing a scan may not be enough to re
program the radio you may need to reset the radio.
Factory reset is an option available from the Settings
menu.
To restore the factory settings
Follow the instructions in the ‘DAB SETTINGS MENU •
section to select Factory Reset from the menu.
The Radio will now re-start and scan the DAB broadcast
stations in your area.
After reset all settings are returned to the factory defaults
and any stored presets are erased.
There is a headphone output socket on the back panel of
the radio. If headphones are connected to this socket for
private listening, the speakers will cut out automatically.
HEADPHONES
