Manual Terraillon TensioSmart (page 42 of 44) (English, German, Dutch, French, Italian, Portuguese, Spanish)

651308

Zoom out

Zoom in

1/44

Table 4

Guidance and manufacturer’s declaration – electromagnetic immunity – for

ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacture’s declaration – electromagnetic immunity

The LS802-B is intended for use in the electromagnetic environment speci ed below.

The customer of the user of the LS802-B should assure that it is used in such an environment.

Immunity test

IEC 60601

test level

Compliance

level

Electromagnetic

environment - guidance

Conducted RF

IEC 61000-4-6

3 Vrms

150 kHz to

80 MHz 3 Vrms

Portable and mobile RF

communications equipment should

be used no closer to any part of the

LS802-B, including cables, than the

recommended separation distance

calculated from the equation

applicable to the frequency of the

transmitter.

Recommended separation distance

d = 1.167

d = 1.167 80 MHz to 800 MHz

d = 2.333

800 MHz to 2.5 GHz

where P is the maximum output

power rating of the transmitter

in watts (W) according to the

transmitter manufacture and d is the

recommended separation distance

in metres (m).

Field strengths from  xed RF

transmitters, as determined by an

electromagnetic site survey,

should

be less than the compliance level in

each frequency range.

Interference may occur in the vicinity

of equipment marked with the

following symbol:

Radiated RF

IEC 61000-4-3

3 V/m

80 MHz to

2.5 GHz

3 Vrms

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation

is affected by absorption and re ection from structures, objects and people

Field strengths from  xed transmitters, such as base stations for radio (cellular / cordless) telephones and land mobile

radios, amateur radio, AM and FM radio broadcast cannot be predicted theoretically with accuracy. To assess the

electromagnetic environment due to  xed RF transmitters, an electromagnetic site survey should be considered. If

the measured  eld strength in the location in which the LS802-B is used exceeds the applicable RF compliance level

above, the LS802-B should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the LS802-B.

Over the frequency range 150 kHz to 80 MHz,  eld strengths should be less than 3V/m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Terraillon TensioSmart in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Terraillon TensioSmart Manual

Product: