323457
11
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
the formation of limestone deposits. In order that it produces its benefits
it is necessary to regularly effectuate the operation, al least once a
month. Proceed as following:
Set the dry ironing function.
Fill up the tank up to MAX level
Make the iron function as normal bringing the plate to the maximum
temperature.
Disconnect the plug from the current socket when the iron is ready.
Holding down the self-cleaning button (10) wag the iron in horizontal
position, above a sink or a basin. Let the tank get empty. The water-
steam mixture will eliminate a part of limestone residues present in the
plate.
Afterwards connect the plug to the current socket and moving the iron
above an old cloth, eliminate all the residue water present in the plate..
Important:
Pay attention not to get in contact with the water that is comes
out from the plate since it is bowling and you could get burned.
Note:
Before re-using the iron to iron the clothing, pass the cold plate on a
dry cotton cloth.
AFTER USE
Disconnect the plug from the current socket.
Empty the tank.
Always put the steam adjustment command (4) in dry ironing position.
Leave the iron to completely cool down.
Place the iron in vertical position.
CLEANING AND MAINTENANCE
Before effectuating any cleaning operation, disconnect the plug
from the current socket and wait until the iron is completely
cooled down.
Clean the body of the iron only with a soft and dry cloth.
Regularly clean the plate using a normal non abrasive sponge in order
not to ruin the plate surface.
Don’t use chemical or abrasive substances.
Don’t ever emerge the appliance in water or other liquid
substances.
Termozeta S.p.A. reserves the right to introduce technical and/or aesthetic changes to its
products intended to improve performances.
Termozeta is an international trademark. Copyright © 1995. All rights reserved.
danach die festeren Stoffe, die höhere Temperaturen benötigen;
Bevor Sie mit dem Bügeln beginnen, fahren Sie mit dem Eisen über eine kleine,
nicht sichtbare Zone der Wäsche um zu überprüfen, ob die gewählte Temperatur
für den Stoff geeignet ist.
BÜGELN MIT DAMPF
Füllen Sie den Behälter mit Wasser.
Wählen Sie über den Schalter für die Regulierung des Dampfes (4) die Ausgabe
des gewünschten Dampfes (siehe Tabelle A).
Anmerkung
•Wenn das Eisen während der Bügelpausen vertikal aufgestellt wird, wird die
Ausgabe des Dampfes automatisch unterbrochen.
Bei der ersten Benutzung mit Dampf könnten Wassertropfen austreten.
Dies ist normal. Bevor Sie Ihre Wäsche bügeln, führen Sie eine Probe auf einem
alten Stoffstück aus.
TROCKENBÜGELN
•Stellen Sie den Schalter für die Dampfregulierung (4) auf die Position
“Trockenbügeln”.
FUNKTION SPRAY
Diese Funktion ermöglicht es, die Wäsche sowohl während dem Dampfbügeln
als auch Trockenbügeln zu befeuchten.
Um diese Funktion zu aktivieren, drücken Sie die Taste Spray (6) und richten Sie
den Wasserstrahl auf die widerstandsfähigsten Falten.
FUNKTION SUPERDAMPF
•Drücken Sie mehrmals die Taste Superdampf (5): das Bügeleisen lässt
umgehend Dampf von höherer Stärke entweichen.
Anmerkung:
•Nicht zu oft hintereinander die Taste drücken, um das Austreten von
Wassertropfen zu vermeiden.
Benutzen Sie diese Funktion nur, wenn der Drehgriff für die Temperatur (9) sich
in der Dampfzone befindet.
Jedes Mal bei der ersten Benutzung der Funktion Superdampf könnten
Kalkstückchen austreten. Daher empfehlen wir, die ersten Dampfausgaben nicht
direkt auf die Wäsche zu richten.
VERTIKALES BÜGELN
Um aufgehängte Kleidungsstücke, Vorhänge usw. “aufzufrischen”, können Sie
das Bügeleisen vertikal verwenden:
Stellen Sie den Drehgriff für die Temperatureinstellung (9) auf die Anzeige Max.
Halten Sie das Eisen in vertikaler Position mit einem Abstand von circa 15-20 cm
vom Stoff.
Drücken Sie die immer wieder die Taste für den Superdampf (5).
Anmerkung:
•Nicht zu oft hintereinander die Taste drücken. Beachten Sie, während der Arbeit
einige Sekunden zu warten, bis Sie die Taste erneut drücken.
Wichtig:
Benutzen Sie diese Funktion nicht für synthetische Fasern.
•Halten Sie einen angemessenen Abstand zwischen dem Stoff und dem
Bügeleisen ein, um Verbrennungen zu vermeiden.
Benutzen Sie die diese Funktion ausschließlich für auf Kleiderbügeln
hängenden Kleidungsstücke. Versuchen Sie niemals, Kleidungsstücke zu
bügeln, die eine Person bereits an hat: der Dampf ist sehr heiß. Sie könnten
starke Verbrennungen davontragen.
DEUTSCH
• ENGLISH
The symbol of the crossed out dustbin shown on the device
shows that the product, at the end of its useful life, having to
be treated separately from domestic waste, must be
disposed of in special waste collection for electric and
electronic equipment.
For more detailed information regarding the available waste disposal
services, contact the waste disposal unit at your local council.
Appropriate separate waste disposal which allows the device to be
recycled, for compatible environmental treatment and disposal
contributes to limiting negative effects on the environment and health
and favours recycling of the materials which make up the product.
ManualeAnticalc7000 18-05-2006 10:11 Page 21
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Termozeta 73432 anticalc 7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Termozeta 73432 anticalc 7000 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info