716870
28
Zoom out
Zoom in
Previous page
1/30
Next page
28
t
Maintenance and
Cleaning
Your smoker is made from high-quality
materials� To clean and maintain the
surfaces, please heed the following
instructions:
Danger Risk of burning!
Let the smoker cool down
completely before cleaning it�
Only tip out the ash when the fuel has
completely burned out�
Danger Health risk!
Do not use any decolourants or
thinners to remove stains� These
are harmful to health and must
not come into contact with food�
Attention Risk of damage!
Do not use any strong or
grinding solvents or abrasive
pads, since these can attack
the surfaces and leave behind
scrape marks�
• Let the fuel burn out completely after
grilling� This eases the cleaning effort
by burning away excess fat and grill
residues�
• Remove the cold ash and clean the
smoker regularly, ideally after each use�
• Take out the grates and hooks and
clean them thoroughly with soapy
water� Then dry off the parts thoroughly
• After cleaning, apply a thin layer of
vegetable cooking oil to the grates and
hooks�
• Remove loose deposits on the grill
and smoking chambers using a damp
sponge�
• Use a soft, clean cloth for drying� Do
not scratch the surfaces when wiping
them dry
• Clean the internal and external surfaces
generally with warm soapy water
• Regularly tighten all screws before
each use, in order to ensure the smoker
is standing firmly every time you use it�
• Protect your smoker against
continuous weather influences� Since
it is manufactured from steel it will
eventually rust� Clean possible rust
spots and repair them with oven paint�
It is very important that you remove
the ash from the grill chamber before
moisture combines with the cold
ash� Ash contains salt and affects
the inside of the ash collection tray
when damp� In this way, the grill
chamber can be damaged by rust
over the years�
• IMPORTANT: The smoker should
always be stored in a location protected
from moisture�
• PLEASE NOTE: After some use, your
smoker will develop a patina� Should
this rusted look not appeal to you,
you can do the following: Remove the
rust by means of a wire brush or rust-
dissolving gel� You can then coat the
surface with oven paint (heat resistant
up to at least 600 °C)� And your smoker
will once again shine like new!
P180155_TEPRO_FAIRFAX_1104N_SMOKER_20180730_DE_EN.indb 28 30/7/2018 8:42 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tepro 1104N - Fairfax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 1104N - Fairfax in the language / languages: English, German as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info